We are seeking a skilled technician to work closely with the Senior Test Engineer at aircraft test facilities. You will work extensively with high-pressure gas and fluid systems.
Key Responsibilities
Proactively respond to any issues related to the engine or test site to ensure safety.
Assist in managing operations that involve hazardous materials.
Ensure that correct pressures are maintained in the feedlines during tests.
Assist lead Test Engineers with: site preparation and maintenance: conducting pressure and control system checks: instrument calibration and steam boiler operations.
Assisting with instrumentation, installation, and removal of flight engines before and after hot fire tests.
Required Skills and Competencies
Hands-on mechanical fitter or engineering skills, ideally gained within an engineering-focused organization.
A proactive attitude toward safety and operational support.....Read more...
The role involves integrating telemetry systems with existing hardware and software, troubleshooting, providing technical support, and collaborating with clients to develop engineering solutions. The engineer will work on various client projects, including small projects, maintenance, and reactive support.
Key Responsibilities
Integrate and commission telemetry systems.
Develop and maintain technical documentation.
Conduct site surveys and provide technical support.
Collaborate with the team to optimise solutions.
Ensure adherence to quality, project timelines, and safety standards.
Troubleshoot telemetry-related issues.
Essential Requirements
18th Edition Wiring Regs
NVQ Level 3 in Electrical Installations or equivalent
Strong background in electrical engineering, preferably in control systems
Hands-on experience in installing electrical equipment
Proficient in interpreting electrical diagrams and schematics
Experience with telemetry outstations installation and commissioning
Full UK driving licence....Read more...
We are seeking a skilled technician to work closely with the Senior Test Engineer at aircraft test facilities. You will work extensively with high-pressure gas and fluid systems.
Key Responsibilities
Proactively respond to any issues related to the engine or test site to ensure safety.
Assist in managing operations that involve hazardous materials.
Ensure that correct pressures are maintained in the feedlines during tests.
Assist lead Test Engineers with: site preparation and maintenance: conducting pressure and control system checks: instrument calibration and steam boiler operations.
Assisting with instrumentation, installation, and removal of flight engines before and after hot fire tests.
Required Skills and Competencies
Hands-on mechanical fitter or engineering skills, ideally gained within an engineering-focused organization.
A proactive attitude toward safety and operational support.....Read more...
Assist Graduate and Site Engineers in major engineering control activities
Carry out engineering checks as directed such as quality and dimensional control
Carry out surveys and site measurements
Provide site operatives and supply chain colleagues with information from drawings, schedules, and specifications
Complete quality check sheets and enter into as built files
Produce as built drawings and records for activities
Keep accurate records (diaries, photographs, and records of site discussions)
Work to weekly programme drafted by others
Produce accurate daily records of resources employed including subcontractors
Provide details of outputs achieved
You will attend university on a day or block release during the apprenticeship
Training:
You will attend University to study a Civil Engineering degree apprenticeship and gain a bachelors' qualification, as well as completing your End Point Assessment (and your Incorporated Engineer status) with the Institution of Civil Engineers
Bespoke internal development programme to help you to attain the knowledge, skills and behaviours to successfully achieve your apprenticeship, and support your career in Civil Engineering.
You will have the support of your team, line manager, mentor and buddy as well as a dedicated early careers team
Training Outcome:
You will be mentored by one of our Chartered Engineers towards membership of the ICE and becoming a Chartered Engineer
Employer Description:CRL is one of the leading specialist concrete repair & asset maintenance contractors for buildings and structures operating across the UK through a network of six regional offices. We provide a comprehensive asset management and asset maintenance service for buildings and all concrete structures. With over 65 years' experience, CRL deliver proven and cost effective refurbishment options which meet our clients' objectives of upgrading and extending the life of their structures.
CRL are flexible and work collaboratively with our clients. This has helped us secure a high percentage of repeat business across all sectors as either a Principal Contractor or specialist sub-contractor.Working Hours :Monday - Thursday, 9.00am - 5.30pm and Friday, 9.00am - 4.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Presentation skills,Number skills,Analytical skills,Logical,Team working,Initiative,Physical fitness....Read more...
Assist Graduate and Site Engineers in major engineering control activities
Carry out engineering checks as directed such as quality and dimensional control
Carry out surveys and site measurements
Provide site operatives and supply chain colleagues with information from drawings, schedules, and specifications
Complete quality check sheets and enter into as built files
Produce as built drawings and records for activities
Keep accurate records (diaries, photographs, and records of site discussions)
Work to weekly programme drafted by others
Produce accurate daily records of resources employed including subcontractors
Provide details of outputs achieved
You will attend university on a day or block release during the apprenticeship
Training:
You will attend University to study a Civil Engineering degree apprenticeship and gain a bachelors' qualification, as well as completing your End Point Assessment (and your Incorporated Engineer status) with the Institution of Civil Engineers
Bespoke internal development programme to help you to attain the knowledge, skills and behaviours to successfully achieve your apprenticeship, and support your career in Civil Engineering
You will have the support of your team, line manager, mentor and buddy as well as a dedicated early careers team
Training Outcome:
You will be mentored by one of our Chartered Engineers towards membership of the ICE and becoming a Chartered Engineer.
Employer Description:CRL is one of the leading specialist concrete repair & asset maintenance contractors for buildings and structures operating across the UK through a network of six regional offices. We provide a comprehensive asset management and asset maintenance service for buildings and all concrete structures. With over 65 years' experience, CRL deliver proven and cost effective refurbishment options which meet our clients' objectives of upgrading and extending the life of their structures.
CRL are flexible and work collaboratively with our clients. This has helped us secure a high percentage of repeat business across all sectors as either a Principal Contractor or specialist sub-contractor.Working Hours :Monday - Thursday, 9.00am - 5.30pm and Friday, 9.00am - 4.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Presentation skills,Number skills,Analytical skills,Logical,Team working,Initiative,Physical fitness....Read more...
Fabric Engineer – FM Service Provider - Commercial Office Building – Tottenham Court Road, London - up to £37,000 per annumExciting opportunity to work for an established FM service provider situated in Tottenham Court Road, London. CBW is recruiting a Fabric Engineer to work at a commercial building on Tottenham Court Road, London. The successful candidate will have a strong understanding of most general fabric trades with a specific focus on painting & decorating. In return, the company is offering a competitive salary of up to £37,000, overtime and further training. Package & Working hoursUp to £37,000Monday to Friday 08:00 am – 17:00 pm25 days holiday + Bank holidaysFurther trainingCompany pensionKey Duties & ResponsibilitiesGeneral fabric repairsFurniture moves porteragePainting & DecoratingBasic lightingFixing FurnitureHanging Pictures & ShelvesMaintain and update Log booksAssist the maintenance team on site e.g PPMs, fire alarm tests, tap temp checks, flushingEscort sub-contractorsTo undertake basic “Fabric duties” which would include touching up paintwork, tightening hinges, install/repair blinds, changing locks , making minor repairs to cabinets, desks, and putting together small equipment like chairs etc. RequirementsPainting & Decorating qualification or background (Desirable)Knowledge of commercial building maintenanceAn understanding of most building fabric dutiesGood communication skillsHealth & Safety experienceBasic PC literacy, (Microsoft Word, Excel, Internet, smartphone use)Ability to deliver excellent customer serviceSelf-motivation with the ability to manage tight time constraints and prioritise workload If you are interested please email your CV to Alex Denton of CBW Staffing Solutions....Read more...
Electrical Shift Engineer – Continental Shift – Commercial Building – Old Street, London – £50,000 Per annum My client is looking for an Electrical or Mechanical Shift Engineer to be based in a commercial building in Old Street, London. A successful candidate will be electrically or mechanically biased (C&G / NVQ). Working with the maintenance team on site, He or she will be required to carry out electrical, and mechanical maintenance. In return, the company offers a competitive salary of £50,000, further training and career progression. Package £50,000 per annumUniform and Tools ProvidedCycle to work scheme22 days holidayOvertime AvailablePensionInternal Progression & Development Hours of work Continental Shift - 4 nights, 4off, 3 days, 3 nights, 6off, 4 days - 07:00am - 19:00pm / 19:00am - 07:00am Key Duties & Responsibilities Lighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Monitor mechanical plantPlumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractors Requirements Electrically qualified level 3 or Mechanically qualified level 2(C&G, NVQ etc)18th edition (If electrically qualified)Experience working in a large commercial buildingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skillsMust be able to get to the site for 07:00 am startIf interested please send your cv to Ben Miller @ CBW staffing solutions ....Read more...
You will be exposed to all aspects of the process from plant operating techniques to preventative maintenance and emergency breakdown repairs
Continuous advancements in technology mean you will be involved in various plant efficiency improvements which will require you to develop new skills and integrate new equipment on site
Complete planned preventative maintenance, overhauls, and planned shutdown works
Modifying, rewiring, fault-finding, testing, and inspecting
Identify plant improvements and engineer solutions
Ensure site health, safety and environment standards are maintained at a high standard throughout
Training:
Training will take place via block release; you will be on site and occasionally attend college for a week every 6- 8 week
Level 3 Apprenticeship in Maintenance Operations Engineering Technician
Training Outcome:
A full-time position will be offered upon successful completion of the apprenticeship.
Employer Description:Veolia is tackling the climate crisis through a comprehensive range of waste, water and energy management services that help build a circular economy and protect the environment for generations to come. We're innovators committed to carbon reduction through energy-efficient solutions, preserving natural resources, protecting biodiversity, combating climate change and raising environmental awareness.Working Hours :Monday to Friday, working hours to be confirmed, 40 hours per week.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Team working,Initiative,Physical fitness....Read more...
Maintenance Plumber / Fabric Plumber -Commercial Building – Crawley, West Sussex- 4 on 4 off days & nights - £40,500 per anum CBW are currently recruiting for a Maintenance Plumber/fabric engineer to be based at a large commercial building in Crawley, West Sussex. The successful candidate will be a qualified plumber with a proven track record in commercial/property building maintenance. He or she will be required to carry out M&E/Fabric planned and reactive maintenance across this large static site. Working with the maintenance team on site. He or she will be required to have an understanding/hands-on experience of the below. In return, the company is offering a competitive salary, further training, overtime, and the chance to work at this very unique and interesting site. Hours of work4 on 4 off - 2 days 2 nights 06:30am-18:30pm Days / 18:30pm - 06:30am Nights12 Hour Shifts PackageBasic Salary up to £40,50022 Days Annual Leave Free Parking on site Pension Internal and External Training CoursesGenuine career progression Lots of Overtime available. Duties and responsibilitiesRepairing Toilets and Sinks Unblocking Toilets Water Hygiene maintenance and inspectionsPipework inspections and repairsMinor installation works Maintenance of pumps, expansions vessels, PRVs and TMVsFlexible in helping other trades on site Planned and reactive worksWater Treatment (Temperature checks / Not dosing)General building fabricEscort specialist subcontractors RequirementsPlumbing qualified level 2 minimumA proven track record in commercial or property maintenanceInstallation experienceExcellent customer service skillsHappy to cover a large siteHonest, hard-working and reliableTo avoid missing out on this opportunity please send your CV to Alex Denton of CBW Staffing Solutions.....Read more...
Job Title: Automatic Door EngineerLocation: Swanley (Mobile Role – Contracts around South East)Salary: £35,000 - £45,000 per annum + Van Job Description: We are currently seeking an experienced Automatic Door Engineer to join our team. The role is mobile, covering contracts across the South East, with a base in Swanley. As an Automatic Door Engineer, you will be responsible for the installation, maintenance, and repair of both automatic and manual swing doors across a variety of client sites. Key Responsibilities:Install, maintain, and service automatic and manual swing doors at client premises.Carry out repairs and fault diagnosis for automatic doors.Ensure all work is carried out in compliance with relevant safety regulations and standards.Liaise with clients to provide excellent customer service and ensure client satisfaction.Complete service reports and documentation for each job.Maintain a well-stocked van and ensure all equipment is in good working order.Manage your own schedule to ensure all appointments are met in a timely manner.Skills and Experience Required:Minimum 1 year of experience in installing and maintaining automatic and/or manual swing doors.Strong knowledge of automatic door systems and manual swing doors.Ability to diagnose and resolve faults efficiently and professionally.Excellent problem-solving skills and attention to detail.Strong communication skills to work effectively with clients and colleagues.Ability to work independently, managing your own schedule and workload.Additional Requirements:Must have a valid UK Driver’s License with no more than 6 penalty points.Experience working in the South East area is desirable.Willingness to travel to various sites within the South East region.Benefits:Competitive salary of £35,000 - £45,000 per annum.Company van provided.Opportunities for ongoing training and career development.If you are an experienced Automatic Door Engineer looking for a new opportunity with a competitive salary and the chance to work on a variety of contracts across the South East, we would love to hear from you.....Read more...
Fitters Mate (Signage)
Oxford
£27,000- £28,400 + Training + Progression + Supportive Environment + Pension + Immediate Start
Great opportunity for a Fitters Mate to join an established company who can guarantee you work for the long term. Work with an industry leader who has fantastic projects and work with great clients! Work in a tight knit team and benefit from stability.
With over three decades of expertise, this company is a leading company in the signage industry, offering comprehensive services in sign design, manufacturing, installation, repair, and maintenance across the UK and Ireland. As a growing business, they pride themselves on their supportive work environment and fostering strong relationships with clients, ensuring customer satisfaction and repeat business. Your Role As A Fitters Mate Will Include:
Installing signage across the UK
Working within a team Monday - Friday
Collaborate with cross-functional teams to ensure project execution.
The Successful Fitters Mate Will Have:
Fitting experience
Happy to travel
Clean driving license
If you are interested in this position please contact Charlie on 0203 813 7949 Keywords: Sign Fitter, Fitters Mate, Fitter, Field Service Engineer, Engineer, Mobile Fitter, Warwick, Budbrooke, Heathcote, Old Milverton, Norton Lindsey, Woodloes Park, Guys Cliffe, Sherbourne, Wolverton....Read more...
Fitters Mate
Oxford
£28,000- £31,400 + ( OTE £38'000 ) + Training + Progression + + Pension + Immediate Start
Great opportunity for a Fitters Mate to join an established company who can guarantee you work for the long term and give you the chance to earn in excess of £38'000 a year. Work with an industry leader who has fantastic projects and work with great clients!
With over three decades of expertise, this company is a leading company in the signage industry, offering comprehensive services in sign design, manufacturing, installation, repair, and maintenance across the UK and Ireland. This role is best suited for someone with a construction background looking to earn well and become a specialist within this industry! Your Role As A Fitters Mate Will Include:
* Installing signage across the UK
* Working within a team Monday - Friday
* Collaborate with cross-functional teams to ensure project execution.
The Successful Fitters Mate Will Have:
* Power Tools Experience
* Constructin / Fitting Background
* Clean Driving License
If you are interested in this position please contact Charlie on 0203 813 7949 Keywords: Sign Fitter, Fitters Mate, Fitter, Field Service Engineer, Engineer, Mobile Fitter, Warwick, Budbrooke, Heathcote, Old Milverton, Norton Lindsey, Woodloes Park, Guys Cliffe, Sherbourne, Wolverton....Read more...
Trainee Fitter Oxford
£28,000- £31,400 + ( OTE £38'000 ) + Training + Progression + + Pension + Immediate Start
Do you have power tools experience and are looking to join an established company who can guarantee you work for the long term and give you the chance to earn in excess of £38 '000 a year. Work with an industry leader who has fantastic projects and work with great clients!
With over three decades of expertise, this company is a leading company in the signage industry, offering comprehensive services in sign design, manufacturing, installation, repair, and maintenance across the UK and Ireland. This role is best suited for someone with a construction background looking to earn well and become a specialist within this industry! Your Role As A Trainee Fitter Will Include: * Installing signage across the UK * Working within a team Monday - Friday * Collaborate with cross-functional teams to ensure project execution. The Successful Trainee Fitter Will Have: * Power Tools Experience * Construction / Fitting Background * Clean Driving License
If you are interested in this position please contact Sai on 0203 813 7949Keywords: Trainee Fitter, Sign Fitter, Fitters Mate, Fitter, Field Service Engineer, Engineer, Mobile Fitter, Warwick, Budbrooke, Heathcote, Old Milverton, Norton Lindsey, Woodloes Park, Guys Cliffe, Sherbourne, Wolverton....Read more...
Are you a Maintenance Fitter or mechanical engineer in the Kingston area looking for your next move? We have a great opportunity with a national company, known for its learning and development, and career opportunities. Paying up to £45,000 working days with overtime at premium, and a company van, this is the perfect role for someone mechanically minded with the hands-on skills looking for a career with an established company. What's in it for you as a Maintenance Fitter?
A salary of up to £45,000
Company van
Overtime at a premium x1.5 or x2
Up to £200 weekly bonus (KPI dependent)
Monday-Fri working hours
8% Company Pension
Certified Training opportunities and opportunities for progression
Excellent employee benefits program, employee benefits program, discount card for supermarkets etc.
Requirements as a Maintenance Fitter:
Responding to plant breakdowns – ensuring assets are returned to production in a timely manner, and temporary fixes are followed up with a permanent solution
Undertaking emergency breakdown repairs in a timely and efficient way on all production equipment
Liaison in preventative maintenance planning and execution planned shutdowns
Maintaining and promoting Health & Safety rules and regulations, following all company processes and procedures
Qualifications and Experience needed as a Maintenance Fitter:
A good amount of suitable working experience is more important than qualifications
Have a strong, practical mechanical systems background, heavy industry preferred - conveyors, drive systems, belts, bearings, shafts, pulleys etc.
Possess a fault-finding mindset to identify defects and recommend appropriate action
Possess the ability to remove and fit bearings
Adheres to site-specific SHE procedures and Safe Working Practices
If interested, please apply now…....Read more...
Embedded Software Test Engineer required to specify, design, develop and use firmware testing tools with a focus on automated testing tools. You will be part of an existing product testing team taking ownership of automated testing systems maintenance and development working closely with test engineers and developers.
Requirements
Engineering degree or equivalent.
Embedded systems experience C, C++ or Python.
Precise attention to detail and ability to work effectively in a fast-paced environment.
Experience with software testing techniques, both manual and automated.
Exposure to GPS and automotive-based technologies.
Full clean UK driving license.
Responsibilities
Develop and utilise software and firmware testing tools for product testing tasks.
Improve product testing tools and processes.
Take ownership of automated test systems and their continued development.
Create and maintain testing documentation.....Read more...
Embedded Software Test Engineer required to specify, design, develop and use firmware testing tools with a focus on automated testing tools. You will be part of an existing product testing team taking ownership of automated testing systems maintenance and development working closely with test engineers and developers.
Requirements
Engineering degree or equivalent.
Embedded systems experience C, C++ or Python.
Precise attention to detail and ability to work effectively in a fast-paced environment.
Experience with software testing techniques, both manual and automated.
Exposure to GPS and automotive-based technologies.
Full clean UK driving license.
Responsibilities
Develop and utilise software and firmware testing tools for product testing tasks.
Improve product testing tools and processes.
Take ownership of automated test systems and their continued development.
Create and maintain testing documentation.....Read more...
We are looking for an experienced Service Engineer to join a global market leading manufacturing business based in Banbury. The role is full time and permanent offering a salary of £35,000 with an increase after probation (6 months) and extra 20 - 30% achievable with overtime. Ideally based within a commutable distance of Banbury the role will be installing, servicing and repairing equipment.
Key Accountabilities and Responsibilities for the Service Engineer:
Installation and commissioning new machinery
Perform routine, planned maintenance on all customer equipment
Pro-actively work with the team to report known issues / faults and to ensure they are effectively dealt with and closed out
Perform breakdown repairs on customer machines
Order spare parts and ensure stock locations are maintained and kept in order
Work with the customer to prioritise workloads in order to maximise production
Experience required for the Service Engineer:
Experience working on commercial manufactured equipment or FMCG
Engineering qualification – NVQ level 2
Able to maintain a high-volume production line to ensure productivity is maximised
Electrical testing and logical fault-finding processes
Good problem solving and diagnostic skills
Laundry experience would be desirable
Able to work in a high pressure environment
What’s in it for you?
Starting salary £35,000 rising to £37,500 after probation (6 months)
20 – 30% additional pay with overtime
Overtime 1.5 x after 40 hours, double time Saturday, Sunday or Bank Holidays
25 days holiday + Bank hols
Company car, smart phone and laptop
Company assisted private healthcare
In house and on the job training and development
....Read more...
Recruit4Staff are proud to be representing their client, a well-established engineering company in their search for a Electrical Fitter to work on their site on the Wirral. For the successful Electrical Fitter our client is offering:
Up to £35,300 basic salary + OvertimeMonday to Friday 8am - 16:30pm, with an early finish on FridaysPermanent role23 days annual leave + bank holidays Death in service Holiday buy/sell scheme
The Role - Electrical Fitter:
Electrical fitting, maintenance and assemblyBench work following schematicsMaking up new components including wiring, data cabling, and fibre opticsMaking up of wiring loomsBuilding of electrical components, then fitting and linking componentsAssembly, installation, repair, and modification work or electrical componentsWorking on small and large marine craftsWorking as part of a team to finish projects within deadlines
What our client is looking for in an Electrical Fitter:
Experience working on small marine crafts BENEFICIALLevel 3 in electrical engineering or equivalent ESSENTIAL Experience of panel wiring and electrical component assembly ESSENTIALExperience of electrical installation, repair, and modification work ESSENTIALExperience working from engineering drawings & electrical schematicsGreat attention to detail ESSENTIAL
Key Skills & Similar Job titles: Electrical fitter, Marine Engineer, Electrical Marine Engineer, Electrical Engineer, Panel Wirer, Electrical Technician, Electrical Panel BuilderCommutable from: Wirral, Ellesmere Port, Chester, Liverpool, North Wales, Runcorn, Deeside For further information about this and other positions, please apply now. This vacancy is being advertised on behalf of Recruit4staff (Wrexham) Limited who are operating as a recruitment agency, agent, agencies, employment agency or employment business.....Read more...
FM Technical Supervisor - Gateshead - Global Facilities Management Organisation: ManufacturingCBW Staffing Solutions are seeking an experienced Technical Supervisor with a strong Mechanical or Electrical bias to join our client’s team at a prestigious manufacturing site, based in Gateshead.This is an exciting opportunity to take on an exciting role in ensuring the seamless operation, maintenance, and compliance of all FM requirements.Package:Competitive salary between £48,000 - £50,000 per annum (depending on experience) Core hours are Monday - Friday (40 hours per week)25 days annual leave plus bank holidaysGenerous workplace pension scheme Training, development & progression opportunitiesResponsibilities:Oversee and coordinate planned and reactive maintenance of all M&E systems, ensuring compliance with statutory and regulatory requirementsProducing and reviewing RAMS/SOP’s for routine maintenance tasksLead a team of engineers and contractors, providing technical support and guidanceLiaise with the client, site management, and external contractors to ensure efficient service deliveryEnsure health and safety protocols are followed, maintaining a safe working environmentManage asset performance, energy efficiency initiatives and continuous improvement projectsMaintain accurate records, documentation, and compliance reports Requirements:Proven experience in a similar Technical Supervisor or Lead Engineer role within the Facilities Management industryStrong M&E knowledge with relevant qualifications (e.g., City & Guilds, NVQ, or equivalent in Electrical/Mechanical Engineering)Experience working in a manufacturing or industrial environment is highly desirableInterested? Apply with a full & up to date CV or contact Aaron Rutter at CBW Staffing Solutions.....Read more...
Our client is a leading engineering business that has been established for over half a century providing mechanical handling solutions to many industries across the globe.They are looking to strengthen their projects & design team by recruiting an additional project engineer / design engineer to their successful team.If you have previous design and or project experience within materials handling equipment and are looking to join a highly stable company who can offer a competitive salary then apply now for immediate consideration.Purpose of Job: Responsible for the engineering and technical disciplines needed to complete a project.Project Engineer / Design Engineer - Core Skillset• System layout experience• SolidWorks + AutoCAD (GA, Design & Detailing)• Experience with special purpose machinery, ideally conveyors• Sheet metal, structural and fabrication design• Solid knowledge of material flow• Project Management• Managing costs, BOMs• ERP/ MRP systems• Prior experience with recycling equipment ideal but not essentialDesign Activities• To produce general arrangement drawings in 3D and/or 2D for the Projects and Sales departments. This involves the full engineering integration of the company’s inhouse products (conveyors, structures and ancillary equipment) with that of specialist third party manufacturers to create a tailored plant layout within the space available without compromising material flow.• To work with the Sales team or the Projects team to optimise a layout until it reaches the point of Design Freeze at which the customer signs off the GA to allow full project launch.• To ensure design quality, cost, time and standardisation are appropriately considered throughout the design and delivery process• To use SolidWorks and AutoCAD as the main design platforms for the above.Project Engineer / Design Engineer - Project Execution• Be hands-on, pro-active and own the engineering development of a project from initial concept through design, release, manufacturing, testing and commissioning.• To model and detail detailed in-house products through to full release to the shopfloor producing detailed manufacturing drawings from 3D models (SolidWorks). This will involve using the Company’s standards library and customising if necessary.• To create and release BOM’s (Bill of Materials) within the company MRP system.• To produce and maintain technical documents for the Engineering and Sales departments, operating manuals, H&S, maintenance etc.• To define product technical specifications, both internal design standards and legislative/mandated industry standards.• To attend site to take or check measurements• To produce technical specifications for in-house products or those we purchase.• To challenge existing designs and manufacturing methods for the benefit of the Company and the customer.• To work closely with the Manufacturing department, Project Engineers and Sales team to ensure designed products meet the overall requirements of the business• To provide full engineering support on the project including at site whenever needed and particularly over Installation, Commissioning and Testing.• To give full support to the Project Manager over the course of the project and attend site as necessary to ensure the plant/machine is successfully commissioned and customer is delighted.Assessment and Improvement Duties• Assess which sales and/or project layouts worked well, and which did not in order to improve the design process for next time.• Work on the continuous improvement of existing products and processes.
• Make any necessary adjustments to designs to reduce costs wherever possible.• To analyse the costings of our proposals and projects in comparison to our competitors’ Proposals to unlock the differences between what is being offered in order help the Company’s Sales department become more effective with its own proposals.• To remove cost from our proposals by working continuously toward smarter solutions, tighter designs, alternative third-party suppliers and new processing concepts. To add as much functionality to every design, even if the extra functionality is included as priced extras. Our aim is for the most efficient designs with best functionality at the most cost-effective prices.• To appraise the Sales proposals to ensure the quality of our designs, offers and our approach is always at the highest possible level, visually appealing as possible, clear as possible in its concept to ensure our customers will value it.Experience & Qualifications• Experience as a Project Engineer / Design Engineer• Experience in sheet metal and fabricated product design is essential• Experience in special purpose machinery design, desirable• Experience in recycling and associated material flow• Proficient use of SolidWorks 2022 & AutoCAD 2D• Basic knowledge of electrical engineering• Creative and innovative with a desire to improve continuously• Excellent problem-solving skills• Able to efficiently communicate both written and oral• Confident decision-making ability• HNC or equivalent within mechanical / manufacturing engineering subjectDesign Engineer previous suitable job titles: Project Design Engineer, Project Engineer, Draughtsperson, Draughtsman, Draughtswoman, Draughtsperson, Design Project Engineer, Detailer, Mechanical Design Engineer, CAD Draughtsperson, CAD Drafter, Project Manager, Mechanical Project Engineer, Design Technician, Mechanical Design TechnicianPlease apply ASAP....Read more...
Our client is a leading engineering business that has been established for over half a century providing mechanical handling solutions to many industries across the globe.They are looking to strengthen their projects & design team by recruiting an additional project engineer / design engineer to their successful team.If you have previous design and or project experience within materials handling equipment and are looking to join a highly stable company who can offer a competitive salary then apply now for immediate consideration.Purpose of Job: Responsible for the engineering and technical disciplines needed to complete a project.Project Engineer / Design Engineer - Core Skillset• System layout experience• SolidWorks + AutoCAD (GA, Design & Detailing)• Experience with special purpose machinery, ideally conveyors• Sheet metal, structural and fabrication design• Solid knowledge of material flow• Project Management• Managing costs, BOMs• ERP/ MRP systems• Prior experience with recycling equipment ideal but not essentialDesign Activities• To produce general arrangement drawings in 3D and/or 2D for the Projects and Sales departments. This involves the full engineering integration of the company’s inhouse products (conveyors, structures and ancillary equipment) with that of specialist third party manufacturers to create a tailored plant layout within the space available without compromising material flow.• To work with the Sales team or the Projects team to optimise a layout until it reaches the point of Design Freeze at which the customer signs off the GA to allow full project launch.• To ensure design quality, cost, time and standardisation are appropriately considered throughout the design and delivery process• To use SolidWorks and AutoCAD as the main design platforms for the above.Project Engineer / Design Engineer - Project Execution• Be hands-on, pro-active and own the engineering development of a project from initial concept through design, release, manufacturing, testing and commissioning.• To model and detail detailed in-house products through to full release to the shopfloor producing detailed manufacturing drawings from 3D models (SolidWorks). This will involve using the Company’s standards library and customising if necessary.• To create and release BOM’s (Bill of Materials) within the company MRP system.• To produce and maintain technical documents for the Engineering and Sales departments, operating manuals, H&S, maintenance etc.• To define product technical specifications, both internal design standards and legislative/mandated industry standards.• To attend site to take or check measurements• To produce technical specifications for in-house products or those we purchase.• To challenge existing designs and manufacturing methods for the benefit of the Company and the customer.• To work closely with the Manufacturing department, Project Engineers and Sales team to ensure designed products meet the overall requirements of the business• To provide full engineering support on the project including at site whenever needed and particularly over Installation, Commissioning and Testing.• To give full support to the Project Manager over the course of the project and attend site as necessary to ensure the plant/machine is successfully commissioned and customer is delighted.Assessment and Improvement Duties• Assess which sales and/or project layouts worked well, and which did not in order to improve the design process for next time.• Work on the continuous improvement of existing products and processes.
• Make any necessary adjustments to designs to reduce costs wherever possible.• To analyse the costings of our proposals and projects in comparison to our competitors’ Proposals to unlock the differences between what is being offered in order help the Company’s Sales department become more effective with its own proposals.• To remove cost from our proposals by working continuously toward smarter solutions, tighter designs, alternative third-party suppliers and new processing concepts. To add as much functionality to every design, even if the extra functionality is included as priced extras. Our aim is for the most efficient designs with best functionality at the most cost-effective prices.• To appraise the Sales proposals to ensure the quality of our designs, offers and our approach is always at the highest possible level, visually appealing as possible, clear as possible in its concept to ensure our customers will value it.Experience & Qualifications• Experience as a Project Engineer / Design Engineer• Experience in sheet metal and fabricated product design is essential• Experience in special purpose machinery design, desirable• Experience in recycling and associated material flow• Proficient use of SolidWorks 2022 & AutoCAD 2D• Basic knowledge of electrical engineering• Creative and innovative with a desire to improve continuously• Excellent problem-solving skills• Able to efficiently communicate both written and oral• Confident decision-making ability• HNC or equivalent within mechanical / manufacturing engineering subjectProject Engineer previous suitable job titles: Project Design Engineer, Design Engineer, Draughtsperson, Draughtsman, Draughtswoman, Draughtsperson, Design Project Engineer, Detailer, Mechanical Design Engineer, CAD Draughtsperson, CAD Drafter, Project Manager, Mechanical Project Engineer, Design Technician, Mechanical Design TechnicianPlease apply ASAP....Read more...
Domestic Gas Engineer - Glasgow - Salary up to £40,000 DOE We are offering a fantastic opportunity for a motivated engineer to be upskilled to commercial gas, providing training and career progression in a supportive environment. This role comes with full training provided to expand into commercial gas work on a large static site. Key Responsibilities:Carry out installations, servicing, and maintenance of gas appliances and heating systems.Undertake fault-finding and repairs on a range of boilers, central heating systems, and hot water systems.Shadow and train alongside experienced commercial gas engineers to develop new skills.Ensure all work complies with gas safety regulations and health & safety guidelines.Provide excellent customer service, working across residential and light commercial properties.Complete all required documentation and maintain accurate job records.Person Specification:Domestic Gas Qualifications (CCN1, CENWAT, CPA1, CKR1, HTR1) (essential).Desire to upskill to commercial gas (training provided).Strong problem-solving skills and ability to work independently.Full UK driving licence (required).Excellent communication and customer service skills.Salary & Benefits:Competitive salary: Up to £40,000 per annum DOE.Generous holiday allowance: 25 days of annual leave plus bank holidays.Training and development: Opportunities to further your skills and progress in your career.Company pension: Contributing to your long-term financial security.....Read more...
We are seeking an experienced Maintenance Electrician to join a market-leading international manufacturing organisation based in the Arnold area of Nottingham.The business offers £52,200 basic salary, plus 5% performance bonus and overtime is also available at a premium for those who want to earn more.The shift pattern is 4 Days On, 4 Off, 4 Nights On, 4 Off. 4 Days On, 4 Off. (06:00-18:00 / 18:00-06:00).We are keen to speak with an experienced Maintenance Electrician seeking to join a forward-thinking company with large backing and wants to further their career with an array of accredited training, development and progression opportunities, plus fantastic prospects.What’s in it for you as a Maintenance Electrician:
Salary: £52.2K per annum
Pension contribution up to 10%
Overtime paid at 1.5x and 2x
5% KPI Bonus
3 x Salary Life Assurance Scheme
Health Care Scheme Aviva Digi+
Share Scheme options
10% Pension Match
Employee Benefits Package
Training and career development, including health and safety training, management training (ILM), cross skilling and upskilling
Hours of work: Days and Nights, 6am to 6pm, 6pm to 6am, 4 on 4 off shift pattern
Job security and personal development within a market leading, international manufacturing organisation.
Main Duties & Responsibilities of the Maintenance Electrician include:
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained – maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible
Make sure PPMs and commissioning stages are followed.
Qualifications and Experience of the Maintenance Electrician:
Recognised Electrical Engineering Apprenticeship & Qualification or level 3 qualification: NVQ and BTEC, with City and Guilds etc – Must be Electrical Engineering Qualifications to Level 3
Motor, Drive, safety circuit and PLC system experience would be a distinct advantage
The ability to work within a fast-paced manufacturing environment undertaking PPM and TPM activities
High degree of Health & Safety awareness
Ability to fault find, repair and provide solutions to electrical machinery problems.
If you are interested, please apply now…Keywords: Electrical Maintenance Engineer / Maintenance Electrician....Read more...
Holt Executive are partnered with a leading design and manufacturing business with a cutting-edge product range that aids specific customer requirements, servicing a variety of markets across the globe including the Defence and Surveillance industries.
They require a Field Service Engineer to provide field support to customers worldwide ensuring the stable operation of hardware & software products. This will involve installing, configuring, maintaining, supporting, and optimizing all products and systems, which includes fire control systems, Naval electro-optical surveillance systems and land/vehicle surveillance systems.
Key Responsibilities for the Field Service Engineer:
- Offsite repairs to products and systems, and installation of new products at customer sites.
- After sales support and servicing to customers.
- Generating post site visit reports to include any recommendations and/or future actions.
- Strip-down / survey, repair, and test allocated customer repair returns.
- Testing and evaluating potential new equipment, sensors/cameras etc.
- Preparation of risk assessments and SSOWs for installation/commissioning activities.
- Lead (as required) in-house Factory Acceptance Testing (FATs) and other customer activities.
Key Skills & Experience for the Field Service Engineer:
- Experience of complex systems maintenance with electrical and mechanical assembly tools.
- Electronics knowledge, including microcontrollers, with an understanding of basic control theory.
- Competent mechanical and electro-mechanical skills and understanding.
- A strong understanding and proficiency with electrical, mechanical, PC architecture, and software skills including problem diagnosis, software loading and updates.
- Comfortable working in exposed or adverse conditions at land and sea, including working at heights and with large heavy equipment.
- Must be willing to travel worldwide at sometimes short notice, working extended hours as necessary (company compensation policy applies).
- Clean driving licence with class C1 is desirable for driving company test vehicle.
Company Benefits:
- 37.5 hour working week. Company Compensation Policy applies to overtime hours.
- Lunchtime finishes on a Friday.
- 28 days annual leave plus bank holidays.
- Christmas closure.
- Group pension plan matched contributions up to 5%.
- Income protection scheme and Employee Assistance Programme.
- Employee Help@Hand service gives you and your family access to 4 key services including remote GP service, second opinion, mental health pathway service and physiotherapy consultations.
- Life assurance policy, including bereavement counselling and probate helpline.
- Company shares incentive plan and save-as-you-earn scheme.
- Group electric vehicle salary sacrifice scheme.
Security Clearance Requirements:
Due to the nature of the business, applicants need to be able to obtain UK Security Clearance as a mandated requirement. Therefore, if successful, you will need to provide proof of identity, employment history and right to work in the UK, along with proof of UK residency for at least five years.
If your skills and experience match this Field Service Engineer opportunity, we encourage you to apply now!....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. The Engineering, Facilities and Maintenance Manager is responsible for directing all engineering activities and maintaining and upgrading the Site's facilities and production equipment. In addition, this position is responsible for maintaining/advancing a viable and visual Preventative Maintenance Program at the facility, while identifying capital requirements for the annual capital plan. Responsibilities also include developing and assisting in value stream design and implementation of lean principles and tools within the manufacturing environment. This includes, but is not limited to, assisting with value stream mapping, employee training, continuous improvement event facilitation, waste identification and elimination, problem solving (through the scientific method), work area and station design and layout, visual control implementation, material flow, and progress tracking and communication. Lastly, this resource acts as a passionate advocate for a cultural change toward lean thinking throughout the organization.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Partner with LEAN leadership in eliminating unplanned production interruptions. Use DAKOTA as the compliance tool to report incidents, near misses and non-conformances, and to maintain compliance with EH&S. Work with the maintenance crew to implement the needed preventative measures. Recommend design modifications to eliminate machine or system malfunctions. Prepare capital projects for submission to management. Included are costs, schedule, Job Hazard Analysis (JHA), Process Hazard Analysis (PHA), and needed procedures. Serve as lead project engineer for approved capital projects with the goal of on time and on budget completion. Develop and administer a viable and visual Preventative Maintenance Program that reduces downtime and improves overall reliability of production and production supporting machinery. Responsible for identifying capital requirements for the facility's annual capital plan and budget. Direct, review, and approve product design and changes consistent with MOC procedures. Recruit departmental employees; assign, direct, and evaluate their work; and oversee the development and maintenance of staff competence. Analyze annual site utility expenditure and develop plan to optimize plant efficiency to reduce costs (ISO 14001). Perform administrative functions such as reviewing and writing reports, approving expenditures, enforcing rules, and making decisions about the purchase of materials or services. Integrate the plant PHA initiative with the appropriate capital projects. Investigate equipment failures and difficulties to diagnose faulty operations and work with the maintenance crew to implement the needed preventative measures. Interface with leadership, operators, and maintenance to develop needed TPM programs. Support SPC, DOE's, and other Quality initiatives. Lead Engineer for the production processes. Develop facility infrastructure upgrade plan.
EDUCATION REQUIREMENT:
B.S. in Mechanical, Chemical or Electrical Engineering.
EXPERIENCE REQUIREMENT:
At least 1-2 years in a supervisory role. 5-10 years of Facility and Process Engineering experience. Experience managing capital projects required. Experience is Engineering Management. PHA and "Process Safety Management" experience a positive.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming. Complex Problem Solving - Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions. Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense. Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. People Interaction - Ability to work with diverse groups to reach consensus regarding problems, and needed changes.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, balance, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $99,222 and $124,027. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
