Multi-skilled Maintenance Engineer - Commercial Offices - London Bridge - Up to £46,000 This exciting opportunity to work for a leading property management company situated in Liverpool Street. I am currently looking for a Multi-skilled Maintenance Engineer to look after a commercial office contract in the London Bridge area working on a single-person site. The successful candidate will be electrically or mechanically qualified and have an all-around understanding of most trades, as well as having a proven track record in commercial building maintenance. He or she will be required to attend a property and carry out all aspects of planned and reactive electrical, mechanical, and fabric maintenance. In return, the company are offering a competitive salary paying up to £46,000, overtime, and a great package. Key Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Maintain and update Log booksPlumbing - Unblocking toiletsPumps, motors Hours of workMonday to Friday - 08:00am to 17:00pmOvertime AvailableNO CALL OUT Requirements (Essential) Electrically or mechanically qualified City & Guilds - Level 2 & 3A proven track record in commercial building or property maintenanceHappy to cover a portfolio of high-end propertiesExcellent customer service skillsHighly flexible and adaptable with hours, duties, and travelFull driving license (In case you are required to use the company pool car)Committed to/looking for a long-term roleElectrical Installation experience (Minor works)Able to work to very high standardsBasic knowledge of building regulationsA thorough understanding of Health & Safety standardsA professional approach with particular emphasis on maintaining confidentialityStrong time management, organisation and planning skillsOversee / Supervise specialist subcontractorsProvide cover for colleagues in times of absence and on-call assistance....Read more...
Multi-skilled Maintenance Engineer - Commercial Offices - Liverpool Street - Up to £46,000 This exciting opportunity to work for a leading property management company situated in Liverpool Street. I am currently looking for a Multi-skilled Maintenance Engineer to look after a commercial office contract in the Liverpool Street area working on a single-person site. The successful candidate will be electrically or mechanically qualified and have an all-around understanding of most trades, as well as having a proven track record in commercial building maintenance. He or she will be required to attend a property and carry out all aspects of planned and reactive electrical, mechanical, and fabric maintenance. In return, the company are offering a competitive salary paying up to £46,000, overtime, and a great package. Key Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Maintain and update Log booksPlumbing - Unblocking toiletsPumps, motors Hours of workMonday to Friday - 08:00am to 17:00pmOvertime AvailableNO CALL OUT Requirements (Essential) Electrically or mechanically qualified City & Guilds - Level 2 & 3A proven track record in commercial building or property maintenanceHappy to cover a portfolio of high-end propertiesExcellent customer service skillsHighly flexible and adaptable with hours, duties, and travelFull driving license (In case you are required to use the company pool car)Committed to/looking for a long-term roleElectrical Installation experience (Minor works)Able to work to very high standardsBasic knowledge of building regulationsA thorough understanding of Health & Safety standardsA professional approach with particular emphasis on maintaining confidentialityStrong time management, organisation and planning skillsOversee / Supervise specialist subcontractorsProvide cover for colleagues in times of absence and on-call assistance....Read more...
We're looking for an exceptional team member with strong administrative skills to join this busy department as a Service Coordinator. You’ll provide scheduling and administrative support to both the internal and external customers. This includes handling general customer service, invoicing, cost estimations, reporting, and processing service contracts. Based onsite in Banbury the role is full time and permanent with a starting salary of £26,000 with excellent benefits including annual bonus.
Main Responsibilities for the Service Coordinator
Be a brand ambassador, embodying company values at all times
Efficiently schedule work for our field service engineers, adhering to response times and time scales
Creating service purchase orders, gaining supplier invoice approval
Manage and maintain engineer planner
Handle incoming phone calls and emails from customers and the internal team
Resolve complaints and escalate them if needed
Communicate with external and internal customers to manage service requests smoothly
Ensure accuracy in work orders and submit all service-related paperwork promptly
Create and manage cost estimations within the CRM, following customer and contract conditions
Calculating engineer overtime and collating timesheets
Booking engineer travel
Process spare parts orders for accepted cost estimations
Follow up on outstanding purchase orders, cash payments, and open cost estimations
Investigate and resolve technician stock take queries
Address service invoice queries, generate necessary credit paperwork, and maintain smooth invoicing
Generate daily, weekly, and monthly customer reports as required
Required Skills, Experience, Knowledge, and Competencies for the Service Coordinator
Previous experience in a service, customer service, administration, or support role
Able to work in a fast-paced demanding environment
Strong Microsoft Office skills
A knack for teamwork and collaboration
Excellent communication skills with a natural ability to build strong relationships
Proactive and full of initiative
Meticulous and accurate, with a keen eye for detail
What's in it for you?
This is an exciting opportunity to join a thriving, world-leading company that truly values its staff and want you to grow with them, some of the amazing benefits include:
Starting salary of £26,000 plus annual bonus
34 days of holiday (including 8 bank holidays)
Hybrid working after probation
Profit share
Annual bonus
Study support
Sick pay
Life assurance
Pension plan
Staff discounts
Fantastic progression opportunities
....Read more...
My clients in North Bucks have an immediate requirement for an Integration / Mechatronics Engineer.This role is commutable from Milton Keynes, Newport Pagnell, St. Neots, Biggleswade, Sandy, Bedford. Although there is some flexibility for occasional work from home, you should expect to spend most of your time in the office. The role may involve occasional travel to meet with customers and support product deployment.My clients are a world leader in in the design, manufacture and continuous improvement of wireless condition monitoring solutions. Their technology is used in 35 countries in rail, construction and mining. More than 30,000 sensors were installed last year, helping users manage ground and structural movement, landslide risk, geotechnical behaviour, rail track movement and much more.Main Duties & Responsibilities :- Design, develop, and enhance electromechanical systems and products by integrating advanced mechanical solutions with software and hardware components.- Analyze project requirements to design robust mechanical and electronics systems using innovative approaches and technologies.- Enhance product functionality and performance through the design of complex mechanical and electronic assemblies and components.- Collaborate with cross-functional teams, including electronic engineers, software developers, and embedded firmware engineers to devise comprehensive solutions to engineering challenges.- Provide detailed documentation for designs, including technical drawings, specifications, and operation manuals.- Ensure the reliability and efficiency of existing mechanical and electronic systems and components through regular maintenance and updates.- Utilize CAD (Computer-Aided Design) software, such as SolidWorks or SolidEdge, to create detailed mechanical designs and layouts.- Oversee the manufacturing process of mechanical components to ensure products meet quality standards.- Troubleshoot and refine electronic systems that incorporate mechanical mechanisms.- Lead the testing and final implementation of systems to ensure they meet both technical specifications and customer expectations.Relevant Knowledge, Experience & Qualifications:Candidates should assess their suitability against the following essential and/or desirable relevant knowledge, experience & qualifications:Essential:- Bachelor’s degree in Mechatronics Engineering, Mechanical Engineering, Electronic Engineering or a related field (or equivalent experience).- Substantial industry experience in mechatronics, mechanical design, robotics, or a similar field.- Proficient in mechanical design and CAD software, particularly SolidWorks or SolidEdge.- Strong understanding of mechanics, kinematics and electronics- Excellent analytical, problem-solving, and technical skills.- Experience in programming for system control, preferably with languages like C, Python.- Proven track record in managing complex projects from conception to completion.- Effective communication and teamwork abilities.Desirable:- Master’s degree in Mechanical or Mechatronics Engineering.- Relevant certifications in mechanical design, project management, or related tools and software.Package:Salary to c£55k, negotiable for a candidate with extremely well matched skills & experience.Workplace Pension Scheme with matched employer contributions.Life Assurance scheme.Cycle to Work Scheme.Tech Purchase Scheme.Private Healthcare & Cash Plan.Learning & Development scheme including a variety of training courses.Volunteer Time Off.To apply for this Mechatronics / Integration Engineer role in North Bucks please contact us ASAP!....Read more...
Job Title: Assistant Cluster Chief MaintenanceSalary: €4,500 - €5,000 per month + perksLocation: Amsterdam, Netherlands One of the coolest Hotel brands in The Netherlands is looking for a Cluster Chief Maintenance! If you always wanted to work in a trendy, open-minded, lifestyle, and diverse brand, this is your chance.Tasks:
Conduct preventive maintenance and repairs on hotel power plant machinery to maintain a safe, secure, and comfortable environment for guests, colleagues, and contractors.
Assist the Regional Chief Engineer with Capex and maintenance projects for hotels in the Netherlands.Conduct regular hotel inspections to assess maintenance needs and ensure compliance with laws and regulations.Direct maintenance, repair, and renovation activities to ensure the physical plant operates efficiently and safely.Improve maintenance standards through process enhancement and implementation of changes.Manage projects proactively and provide timely technical support.Recommend and maintain inventory levels based on budget and supply availability.Support budgeting, forecasting, and recommendations in collaboration with the Regional Chief Engineer.
Maintain extensive knowledge of hotel security and health & safety procedures.Report and address potential hazards promptly.
Develop maintenance management and team members' skills and abilities.Provide leadership to the maintenance team and support ongoing initiatives.
What we need to see
Relevant experience in maintenance in a similar industryOutgoing personality and team playerHands-on mentality and positive vibeElectrical knowledge is desiredFluency in English
What´s in it for you?
Team activities25 days holidaysPension planDiscounts on stays and restaurants of the brandCareer growth opportunitiesTravel allowanceDiscount on health insuranceThe best team ever!
Job Title: Assistant Cluster Chief MaintenanceSalary: €4,500 - €5,000 per month + perksLocation: Amsterdam, NetherlandsPlease apply today or send your cv to irene@Corecruitment.comto be considered for this great opportunity!Get social…….http://www.corecruitment.com/https://www.facebook.com/COREcruitmentDOTcom/Tweet us @COREcruitment ....Read more...
My clients in North Bucks have an immediate requirement for an Integration / Mechatronics Engineer.This role is commutable from Milton Keynes, Newport Pagnell, St. Neots, Biggleswade, Sandy, Bedford. Although there is some flexibility for occasional work from home, you should expect to spend most of your time in the office. The role may involve occasional travel to meet with customers and support product deployment.My clients are a world leader in in the design, manufacture and continuous improvement of wireless condition monitoring solutions. Their technology is used in 35 countries in rail, construction and mining. More than 30,000 sensors were installed last year, helping users manage ground and structural movement, landslide risk, geotechnical behaviour, rail track movement and much more.Main Duties & Responsibilities :- Design, develop, and enhance electromechanical systems and products by integrating advanced mechanical solutions with software and hardware components.- Analyze project requirements to design robust mechanical and electronics systems using innovative approaches and technologies.- Enhance product functionality and performance through the design of complex mechanical and electronic assemblies and components.- Collaborate with cross-functional teams, including electronic engineers, software developers, and embedded firmware engineers to devise comprehensive solutions to engineering challenges.- Provide detailed documentation for designs, including technical drawings, specifications, and operation manuals.- Ensure the reliability and efficiency of existing mechanical and electronic systems and components through regular maintenance and updates.- Utilize CAD (Computer-Aided Design) software, such as SolidWorks or SolidEdge, to create detailed mechanical designs and layouts.- Oversee the manufacturing process of mechanical components to ensure products meet quality standards.- Troubleshoot and refine electronic systems that incorporate mechanical mechanisms.- Lead the testing and final implementation of systems to ensure they meet both technical specifications and customer expectations.Relevant Knowledge, Experience & Qualifications:Candidates should assess their suitability against the following essential and/or desirable relevant knowledge, experience & qualifications:Essential:- Bachelor’s degree in Mechatronics Engineering, Mechanical Engineering, Electronic Engineering or a related field (or equivalent experience).- Substantial industry experience in mechatronics, mechanical design, robotics, or a similar field.- Proficient in mechanical design and CAD software, particularly SolidWorks or SolidEdge.- Strong understanding of mechanics, kinematics and electronics- Excellent analytical, problem-solving, and technical skills.- Experience in programming for system control, preferably with languages like C, Python.- Proven track record in managing complex projects from conception to completion.- Effective communication and teamwork abilities.Desirable:- Master’s degree in Mechanical or Mechatronics Engineering.- Relevant certifications in mechanical design, project management, or related tools and software.Package:Salary to c£55k, negotiable for a candidate with extremely well matched skills & experience.Workplace Pension Scheme with matched employer contributions.Life Assurance scheme.Cycle to Work Scheme.Tech Purchase Scheme.Private Healthcare & Cash Plan.Learning & Development scheme including a variety of training courses.Volunteer Time Off.To apply for this Mechatronics / Integration Engineer role in North Bucks please contact us ASAP!....Read more...
IT Security Engineer | Telecoms | Gibraltar / Spain / UK | Hybrid
IT Security Engineer required for an exciting Telecoms company based in Gibraltar.
What's on offer to you?
Implement new security protocol
Working with a Managed Service Provider
Reporting to the Director
What You Will Be Doing
Review security logs and respond to security incidents and alerts in a timely manner.
Conduct security audits and compliance assessments to ensure adherence to industry regulations and standards such as ISO 27001 and GDPR.
Collaborate with third-party vendors to ensure the security of their systems and applications that provide service(s) to the business.
Educating employees on security best practices and provide security awareness training.
Stay up-to-date with the latest security threats, trends, and technologies.
Design and implement security solutions that align with the company's security policies, procedures, and standards.
Manage security infrastructure such as firewalls, intrusion detection/prevention, data loss prevention and EDR systems.
Participate in an on-call roster.
Fully remote role with occasional travel to company locations if/when required.
Ability to work outside of regular business hours when required to support critical systems & infrastructure.
What You Will Need to Succeed In This Role
Experience with compliance requirements such as PCI DSS, ISO 270001 and GDPR.
Experience with SIEM platforms such as ELK, Graylog or Splunk.
Experience with vulnerability scanners & management tools such as Qualys, Rapid7, Tenable or Taegis VDR.
Experience with EDR platforms such as CarbonBlack, Crowdstrike, SentinelOne or Defender for Endpoint (ATP).
Experience with NGFW solutions such as Fortigate or Palo Alto.
2+ years’ experience in a similar role.
Excellent written and verbal communication skills, with the ability to liaise with both technical and non-technical staff.
Ability to complete complex tasks methodically, with an eye for detail.
Enthusiastic and passionate about IT.
Excellent organisation, task prioritisation and time management skills, with the ability to operate independently.
Experience with Atlassian JIRA, Bamboo and Confluence (desirable)
Experience with Juniper EX switches (desirable)
Knowledge of NDR & XDR solutions (desirable)
To Apply
If you are an experienced IT Security Engineer, and this is the challenge that you are looking for in your career, get in touch with me today. Please click on the ‘apply’ button and upload your CV and a Cover Letter or alternatively contact Robert Ally, Recruitment Consultant by email Robert.ally@srgeurope.com or call Gibraltar +350 200 69999.
Keywords: IT Security Engineer | Gibraltar | PCI DSS| ISO 27001....Read more...
IT Security Engineer | Telecoms | Gibraltar / Spain / UK | Hybrid
IT Security Engineer required for an exciting Telecoms company based in Gibraltar.
What's on offer to you?
Implement new security protocol
Working with a Managed Service Provider
Reporting to the Director
What You Will Be Doing
Review security logs and respond to security incidents and alerts in a timely manner.
Conduct security audits and compliance assessments to ensure adherence to industry regulations and standards such as ISO 27001 and GDPR.
Collaborate with third-party vendors to ensure the security of their systems and applications that provide service(s) to the business.
Educating employees on security best practices and provide security awareness training.
Stay up-to-date with the latest security threats, trends, and technologies.
Design and implement security solutions that align with the company's security policies, procedures, and standards.
Manage security infrastructure such as firewalls, intrusion detection/prevention, data loss prevention and EDR systems.
Participate in an on-call roster.
Fully remote role with occasional travel to company locations if/when required.
Ability to work outside of regular business hours when required to support critical systems & infrastructure.
What You Will Need to Succeed In This Role
Experience with compliance requirements such as PCI DSS, ISO 270001 and GDPR.
Experience with SIEM platforms such as ELK, Graylog or Splunk.
Experience with vulnerability scanners & management tools such as Qualys, Rapid7, Tenable or Taegis VDR.
Experience with EDR platforms such as CarbonBlack, Crowdstrike, SentinelOne or Defender for Endpoint (ATP).
Experience with NGFW solutions such as Fortigate or Palo Alto.
2+ years’ experience in a similar role.
Excellent written and verbal communication skills, with the ability to liaise with both technical and non-technical staff.
Ability to complete complex tasks methodically, with an eye for detail.
Enthusiastic and passionate about IT.
Excellent organisation, task prioritisation and time management skills, with the ability to operate independently.
Experience with Atlassian JIRA, Bamboo and Confluence (desirable)
Experience with Juniper EX switches (desirable)
Knowledge of NDR & XDR solutions (desirable)
To Apply
If you are an experienced IT Security Engineer, and this is the challenge that you are looking for in your career, get in touch with me today. Please click on the ‘apply’ button and upload your CV and a Cover Letter or alternatively contact Robert Ally, Recruitment Consultant by email Robert.ally@srgeurope.com or call Gibraltar +350 200 69999.
Keywords: IT Security Engineer | Gibraltar | PCI DSS| ISO 27001....Read more...
We are seeking a dynamic and enthusiastic individual to join our team as a Test Engineer, where you will play a crucial role in shaping the future of rocket engines, thrusters, and fluidic control systems.
In this role, you will:
Interpret higher-level design requirements to generate test equipment and test set-up specifications.
Design Test Site Propellant and Pressurant feed systems, Ground Support Equipment (GSE), and Electrical Ground Support Equipment (EGSE).
Lead the procurement, fabrication, and assembly of Test Site Propellant and Pressurant feed systems, GSE, and EGSE.
Develop equipment setup, checkout, and maintenance plans.
Create product test procedures and actively participate in product test activities.
Review and interpret higher-level requirements, generating Compliance Matrix, Design Verification Compliance Matrix against the test plan.
Skills and Competencies:
To succeed in this role, you should have:
An excellent understanding of chemical rocket engineering.
Good knowledge of mechanical engineering and basic electrical engineering.
Enthusiasm for space and space-related propulsion activities.
Ideally, a BSc degree in Mechanical, Aeronautical or Aerospace Engineering, or a BSc Degree in Physics with significant industrial experience.
Mechanical fitter or practical hands-on engineering skills, preferably gained in an engineering-related organization.
Ability to work effectively with various levels of customers and company personnel.....Read more...
Job title: Junior Software Engineer
Location: Boston, United States
Who are we recruiting for?
Our client, a leading data analytics and marine robotics business, is seeking a talented Junior Software Engineer to join their esteemed subsea technology team. As a pioneer in large-scale marine robotic operations, our client utilizes cutting-edge technologies to capture ocean data and deliver maritime solutions while prioritizing sustainability and environmental responsibility.
What will you be doing?
As a Junior Software Engineer, you will play a vital role in supporting the development of new software capabilities and integrating them with other programs and devices. Joining the subsea technology team, your focus will be on contributing to the control of sophisticated robotic equipment deployed from our client's Armada vessels.
Your key responsibilities will include:
Receiving comprehensive training on various software control systems running the uncrewed vessels, enabling you to make resilient software design decisions
Assisting in the building, testing, and deployment of software
Participating in the development of interface adapters and C++ programs
Supporting senior Control Systems Engineers in their tasks
Contributing to the design, specification, development, and documentation of software solutions
Assisting in the integration of control systems into complex 3rd party systems, such as vessel control systems, electric Remotely Operated Vehicles (ROVs), and geotechnical equipment
Adhering to the client's software development practices and effectively documenting developments
Collaborating with OEMs and other vendors to aid development and resolve software issues
Engaging in peer code reviews
Being prepared for domestic and international travel to support equipment and control system integration on ships
Supporting the development of software architecture to facilitate the company's systems design
Participating in and contributing to software sprints within the 'Control' team
Are you the ideal candidate?
The ideal candidate for this role should possess the following qualifications, skills, and attributes:
Essential:
1+ years of engineering experience in a suitable field
Proficiency in software development, particularly in C++ and .NET
Familiarity with version control using Git
Basic knowledge of networking principles
An interest in robotic control systems and their applications
Self-motivated and capable of working effectively within a team to meet deadlines
A strong passion for the development of cutting-edge robotics in the ocean sector
Ability to plan and estimate development tasks, ideally within an Agile framework
Thoughtfulness, thoroughness, and a conscientious approach to work
A team player who values collaboration and seeks the best outcomes for the team
Willingness to take ownership and actively engage in assigned tasks
Ability to handle sensitive and confidential situations with diplomacy
Excellent time management skills and the ability to prioritize tasks in a fast-paced environment
Strong interpersonal skills and the ability to work effectively with colleagues of all levels
Demonstrates critical thinking and the ability to show initiative
Open and receptive to new and innovative ideas
Enthusiasm for contributing to the betterment of people and the planet
Desirable:
Familiarity with QT
Experience with Jira and Confluence
Knowledge of marine survey systems such as GNSS, inertial navigation, and subsea positioning systems
Understanding of satellite, telephony, and digital radio systems
Experience working with Virtual Machines (VMs)
Exposure to PLCs (Programmable Logic Controllers) or other industrial controllers
Familiarity with Bitbucket/Github
Experience in engineering project planning and time management
Previous experience in supervising contractors or working with junior team members
Competency in using office tools such as MS Office, Google Drive, Teams, and email
What's in it for you?
Our client is committed to providing all their employees with the best possible work conditions and benefits, going beyond what's typically considered the 'market average.' As a Junior Software Engineer, you can expect:
Competitive compensation package
Opportunities for growth and career advancement within a pioneering company
Involvement in innovative, cutting-edge projects with a global impact
Possibility of domestic and international travel to support integration efforts
A dynamic and creative work environment that fosters innovation and professional development
Who are we?
Executive Integrity is a global executive search and recruitment consultancy for a more sustainable world with a focus on talent within the Maritime and Renewable Energy sectors. We give a proportion of all our profits to Renewable World, a charity that develops affordable and innovative renewable energy solutions to poverty-stricken communities.....Read more...
Catfoss Recruitment Ltd are currently in partnership with a cutting-edge technology company that is looking to recruit a Quality Engineer to their expanding team on a permanent basis.Building on more than two decades of science led research and development, our client designs and manufactures pioneering power generation technology.Quality EngineerAs a Quality Specialist, you will form part of the Quality Team which has overall responsibility for ensuring that the whole product development process and final product manufacturing meets our high quality and safety standards.Uphold the safety policies and be responsible for performing inspections on products at various stages of production, carrying RCCA activities for non-conforming product, ensuring customer/regulatory standards are being met, compliance to quality standards are followed.Carrying out inspections and investigations, reporting and presenting findings to key stakeholders taking ownership of Non-Conformity Reports, from identifying route cause to seeking solutions and implementing them. You will need to be competent in applying Statistical Process Control (SPC) Measure System Analysis (MSA), 8D Problem Solving Processes and Gage Repeatability & reproducibility (G R&R). You will be expected to follow 5S principles and Health and Safety policies and related procedures.You will liaise and visit suppliers as required, engage with external stakeholders, and represent our values. Understand and communicate issues and complete measurement comparisons feedback to ensure that the “Quality” voice is heard within the business.Quality Engineer - Responsibilities• Take ownership of Non-conformance reporting process (NCR) - Raise, Log, investigate route cause, take and record measurements and collate data, co-ordinate relevant technical and departmental input, and steer them towards solution implementation. Liaise with non-conformance owners (Internal and external) – to coach and guide to conclusion• Ensure segregation of NCR items from ‘Good’ product. Apply 8D, MSA and SPC protocols as required• Raise Non-conformance reports (NCR) as required• Facilitate control items raised to NCR via segregation from good product• Accurate and timely performance of validations, verifications, and inspections; always exploring route cause and highlighting quality concerns appropriately, produce and share recorded findings such as but not limited to• In-process inspections at key areas of the production line• Perform dimensional and visual inspections on machined parts• Complete final QC inspections of parts and assemblies via visual and measurement tests• Present out results of investigations to internal and external stakeholders• Programme the virtual Machine Monitor (VMM) ensuring effective use and accurate output• Complete capability studies and GR&R. Record and report findings, including supporting data and solutions. Purchase appropriate gauging equipment, if required• Complete and record accurate measurements. Provide measurement support and be involved with improvement projects (Supplier, Company and Customer)• Author technical reports and complete technical file, drawing from internal and external stakeholders where required• Record data on all new procedures performed for new parts• Write work instruction for specific tasks• Participate in the regular Materials Review Boards (MRB)• Identify and escalate manufacturing issues to Team Leader and/or Supervisor, participate in resolution process• Achieve set productivity targets and identify ways of improving productivity• Prepare documents ready for start of production (and train out where appropriate)• Be a technical point of contact for quality issues to give guidance/support to get concerns resolved internally• Identify potential failure modes as early as possible in the project i.e. Plan for Quality• Work with Production and Design teams on Process DFMEA (Design Failure Modes Effects Analysis) and DFM (Design for Manufacture) system• Compile documentation to evidence Quality Planning activity, ensure that documents are prepared to support start of production• Identify where Poke yoke systems/methodology can be implementedAbout YouQuality Engineer - Knowledge and Experience• Engineering qualification (HND or Degree) preferred.• Experience with ISO9001 (IATF16949 or AS9110 preferred• Minimum 5 years' experience in a similar role• Formal Quality Control or Quality Assurance training preferred• Auditing qualification (Preferably Lead Assessor)• Clean Driving licenceKnowledge of or capacity to learn:• Measuring equipment Vision Measuring Machine, Comparator, Polyworks (VMM/CMM) (Including programming), Vernier, micrometres height gauges, bore gauges, thickness checking, surface finish, Gauge R&R and SPC, Minitab• Geometric Dimensioning and Tolerance• Problem-solving tools (8D, cause & effect, pareto, PPS, QOS/4panel etc…)• Ideally Green belt trained• 3D measurement• Quality planning and defect prevention tools (Poke yoke / FMEA / Control plans)• ISO9001 management systems• Supplier development• ERP / MRP system• Working in a manufacturing / engineering environment - mechanical or electrical systems• Reading and following engineering drawings and technical specificationsPlease apply ASAPDue to current high volumes of applications to our advertised jobs, we are unable to respond to every application. All successful candidates will be contacted as soon as possible.....Read more...
Civil Engineer
3 months, Inside IR35
Powys
Responsibilities
To support the Team Leader/Project Manager or where appropriate take responsibility for the preparation of design, calculations, drawings, contract documentation, estimates, reports, surveys for assigned projects and undertake such other duties as are allocated.
Using your engineering knowledge undertake design activities from feasibility studies to detailed design and procurement. To identify problems and the constraints of a site, and in consideration of the aims and objectives of a project develop bespoke design solutions and using your engineering judgement make recommendations based on your conclusions.
Actively monitor and supervise assigned schemes to deliver on time and to budget.
To act as Supervisor and monitor the technical control of construction of works and supporting the Project Manager and/or Project Manager’s Representative on and under any Contract(s). To include the measurement of works and prepare accounts for interim and final accounts. Check that works are carried out in accordance with the contract and specification. Supervise and check works undertaken by approved contractors.
To liaise with other agencies, statutory undertakers and stakeholders on behalf of the County Council and other clients
To incorporate ecological and biodiversity matters into design and construction processes.
To address health and safety policies and arrangements in a proactive manner to ensure that a high standard of safe working practices are maintained.
Experience
HND or similar in engineering related discipline
An understanding of Health & Safety legislation and CDM Regulations
An appreciation of the current construction legislation, law and best practice
Knowledge of the range of civil engineering procedures from feasibility to construction
An appreciation of Environmental Legislation
Knowledge of Chapter 8 TM
Good practical experience of Highway Resurfacing and Maintenance projects
Experience of working within a team delivering service on time and to budget.
Experience in dealing with Operational workforce
Experience of job costing methods, financial planning and budget management.
If interested in the role, please contact me at moeez.muhammed@servicecare.org.uk....Read more...
CBW Staffing Solutions are recruiting for experienced Maintenance Joiners/Fabric Engineers, who will play a crucial role in ensuring the structural integrity and visual appeal of our clients' buildings. You will be responsible for conducting a wide range of maintenance, repair, and refurbishment tasks on both joinery and fabric elements. This dual role requires versatility, technical expertise, and a commitment to delivering high-quality workmanship.This role will predominantly be covering the Tyne & Wear area.Package:Competitive salary up to £33,000 per annum (depending on experience)Van & fuel card suppliedCore hours are Monday - Friday (40 hours per week)Participation in an ‘out of hours’ on call rota (to be confirmed)25 days annual leave plus bank holidaysGenerous workplace pension schemeTraining, development & progression opportunitiesResponsibilities:Conduct inspections of building fabric elements, such as walls, ceilings, floors, and roofs, to identify and address maintenance needsPerform repairs and renovations on fabric components using appropriate materials and techniquesInstall, repair, and maintain joinery elements, including doors, windows, cabinets, and fixturesCoordinate with contractors and vendors for specialised fabric-related services, such as upholstery repairs and other outsourced servicesUphold cleanliness and appearance standards for fabric surfaces and finishes throughout the facilityAdhere to safety protocols and regulatory requirements to maintain a secure working environmentQualifications:Qualified to NVQ Level 3 in Joinery/Carpentry (desired, but not essential)Proven experience as a Maintenance Joiner, Fabric Engineer, or similar role within the facilities management industryStrong knowledge of building fabric materials, construction methods, and repair techniquesProficiency in conducting fabric repairs, joinery installations, and maintenance tasksAttention to detail and a commitment to delivering high-quality workmanshipAbility to work independently and as part of a teamEffective communication and problem-solving skillsIf you are a skilled Maintenance Joiner/Fabric Engineer looking for a rewarding career opportunity, please apply with your full CV or contact Aaron Rutter at CBW Staffing Solutions.....Read more...
Company Overview:
We are a leading blue chip food production company based in Milton Keynes, renowned for our commitment to quality and innovation. We are seeking a dedicated Multi-Skilled Maintenance Engineer to join our dynamic team. This is a fantastic opportunity to work within a well-established organization and contribute to the maintenance and continuous improvement of our production facilities.
Key Responsibilities:
Preventive Maintenance: Conduct planned preventive maintenance (PPM) on food production machinery to ensure optimal performance and minimize downtime.
Breakdown Response: Rapidly respond to and troubleshoot machinery breakdowns, implementing effective solutions to restore operations.
Machinery Maintenance: Perform routine and corrective maintenance on a wide range of production equipment.
Continuous Improvement: Identify and execute improvement initiatives to enhance equipment reliability and production efficiency.
Documentation: Keep detailed and accurate records of maintenance activities and machinery performance.
Safety Compliance: Adhere to all health and safety regulations, ensuring a safe working environment.
Working Hours:
Shift Pattern: 3 on 3 off (days and nights, rotating shifts)
Qualifications and Skills:
Experience: Previous experience in a similar role within the food manufacturing industry is essential.
Technical Expertise: Strong knowledge of food production machinery and maintenance procedures.
Engineering Discipline: Relevant qualifications in electrical or mechanical engineering.
Problem-Solving Skills: Excellent troubleshooting skills and the ability to resolve mechanical and electrical issues promptly.
Team Player: Strong communication skills and the ability to work effectively within a team.
What We Offer:
Competitive salary of £52,200 per annum, inclusive of shift allowance
Opportunity to work in a well-established and respected blue chip company
Professional growth and development opportunities
A supportive and collaborative team environment
How to Apply:
If you are a skilled and proactive Maintenance Engineer with experience in the food manufacturing industry, we encourage you to apply. Please submit your CV and a cover letter detailing your qualifications and experience.....Read more...
Company Overview:
Join a reputable food manufacturing company based in Hitchin, where quality and innovation are at the forefront of our operations. We are currently seeking a skilled Maintenance Engineer to become an integral part of our maintenance team. This role offers the opportunity to work in a dynamic environment with a focus on machinery maintenance and continuous improvement.
Key Responsibilities:
Machinery Maintenance: Perform routine and corrective maintenance on a variety of production equipment.
Preventive Maintenance: Execute planned preventive maintenance (PPM) tasks to ensure machinery operates efficiently and downtime is minimized.
Breakdown Response: Quickly respond to machinery breakdowns, diagnosing and repairing issues to restore normal operations.
Continuous Improvement: Identify and implement initiatives to improve equipment performance and overall production efficiency.
Documentation: Maintain accurate records of maintenance activities and machinery performance.
Safety Compliance: Ensure all maintenance activities are conducted in compliance with health and safety regulations.
Working Hours:
Shift Pattern: Double days (Monday to Friday) with flexibility required
Qualifications and Skills:
Experience: Proven experience in electrical and mechanical maintenance, preferably within the food manufacturing industry, though candidates from other industries are welcome.
Technical Expertise: Strong knowledge of machinery maintenance practices.
Engineering Discipline: Relevant qualifications in electrical or mechanical engineering.
Problem-Solving Skills: Effective troubleshooting abilities for mechanical and electrical issues.
Team Player: Excellent communication skills and the ability to work collaboratively within a team.
What We Offer:
Competitive salary of £49,462 per annum
Opportunity to work in a well-established and innovative food manufacturing company
Professional development and training opportunities
Supportive and collaborative team environment
How to Apply:
If you are a skilled Maintenance Engineer with a background in electrical and mechanical maintenance and are eager to contribute to the success of a leading food manufacturing company, we want to hear from you. Please submit your CV and a cover letter detailing your qualifications and experience.....Read more...
At Mego Employment, we are dedicated to matching talented individuals with leading companies across diverse industries.
We are thrilled to present an exceptional opportunity for a Manufacturing Engineer. Our client is renowned for their commitment to excellence and precision, establishing them as a recognised leader in their industry.
Joining their team means you will have the opportunity to drive meaningful change and contribute to their ongoing success.
So, If you are passionate about process improvement, problem-solving, and driving efficiency in manufacturing operations, we want to hear from you!
Responsibilities:
Design, develop, and optimise manufacturing processes to improve product quality and efficiency.
Lead new product introduction (NPI) projects, including process validation and documentation.
Identify opportunities for cost reduction and waste elimination through process improvements.
Collaborate with cross-functional teams (engineering, production, quality) to resolve technical issues and implement solutions.
Implement and maintain manufacturing documentation (work instructions, SOPs) to ensure process consistency.
Conduct root cause analysis and implement corrective actions for production-related issues.
Specify and procure equipment and tools required for manufacturing processes.
Provide training and support to production teams on new processes and technologies.
Qualifications and Skills:
Engineering degree or equivalent.
Proven experience in manufacturing engineering or related roles within a manufacturing environment.
Strong knowledge of manufacturing processes, process validation, and quality systems.
Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and familiarity with ERP systems.
Experience with Six Sigma, Lean Manufacturing, or other continuous improvement methodologies.
Excellent problem-solving skills and ability to work effectively in a team environment.
Strong communication skills and ability to interact with cross-functional teams.
Benefits:
Competitive salary based on experience and qualifications.
Opportunities for professional development and career growth.
Collaborative and inclusive work environment.
Mego Employment Ltd operates as both an employment agency for permanent staff and an employment business for temporary workers.
How to Apply:
If you are ready to take the next step in your career as a Manufacturing Engineer, please apply or call 01803 840844
....Read more...
Senior Firewall Engineer – Canary Wharf Based – Hybrid – Up-To £75,000 DOE We are on the hunt for a technically skilled and confident individual with a strong background within Firewall Engineering to join a growing MSSP and act as a Senior Engineer and Mentor within their Firewall team. In this role you’ll be working with teams across the business as well as on the client end in order to design and implement comprehensive firewall solutions based on client needs and infrastructure.Role Responsibilities:
Design and implementation of firewall solutions based on the organization's security requirements including the evaluation of appropriate firewall technologies and products
Develop and enforce firewall policies to control network traffic and ensure security compliance
Regularly review and update firewall rule sets to adapt to changing security needs
Monitor firewall logs, investigate, and analyse security breaches to determine the root cause and implement corrective actions in a timely manner
Conduct regular network security audits to assess the effectiveness of current firewall configurations
Identify vulnerabilities and recommend improvements to enhance overall network security
Work closely with other IT teams to integrate firewall solutions into the overall network architecture
Provide technical expertise and support to help troubleshoot network security issues
Create and maintain network security documentation, firewall configurations, policies, and procedures for reference and training purposes
Stay updated on the latest cybersecurity threats, vulnerabilities, and industry best practices
Skills and Qualifications:
Technical Proficiency
In-depth knowledge of firewall technologies and products (e.g., Cisco ASA, Palo Alto, Check Point, Fortinet)
Understanding of network protocols, VPNs, and intrusion detection/prevention systems
Relevant certifications in specific Firewall vendors
Ability to troubleshoot and resolve complex network security issues
Experience in assessing and mitigating security risks
Effective communication skills to collaborate with cross-functional teams and convey security concepts to non-technical stakeholders
Strong analytical skills to analyse security incidents and make informed decisions
Ability to manage and lead firewall-related projects
....Read more...
My client specialises in the defence industry, produces and maintains various types of weapons, materials, Aircraft emergency evacuation systems. They are also involved in creating composite materials such as carbon fibre tubes and aero-structures. The manufacturing engineer will be the technical owner of the process including work instructions, equipment, tooling, and other facility requirements.
Primary Responsibilities:
Responsible for tooling design and documentation. Must have the experience with 3D CAD and 2D drafting.
Provides hands-on support for manufacturing assembly of company products.
Technical writing.
Strong understanding and experience in Design for Manufacturing (DFM), Design of Experiments (DOE), Failure Mode Effects Analysis (FMEA), and process hazard analysis (PHA).
Apply working knowledge of product design and assembly to the manufacturing process
Maintain equipment and tooling through coordination with maintenance team.
Coordinate and perform all necessary validation and or process engineering evaluations as needed for manufacturing equipment.
Preferred Qualifications:
BS or MS in Engineering discipline or Physics.
8+ years industry-relevant experience preferred, though others will be considered.
Experience with Lean Manufacturing.
3D solid modelling experience. Minimum 5 years.
Experience designing, installing, and qualifying production equipment including hand tools, fixture, and semi-automated equipment.
Familiar with typical metal working tolerances produced by milling, grinding, turning, and laser or water jet cutting.
Candidates will be put forward for Security Clearance (SC) once the job has been accepted....Read more...
Role: Structural Engineer
Location: Waterford
Salary: Negotiable DOE
Our client are currently seeking a Structural Engineer with strong analytical skills to work on a range of commercial, institutional and industrial projects in Ireland and overseas. This is an ideal role for a high calibre Engineer with strong experience in the delivery of projects and with the ambition and potential to develop into a member of the senior management team, contributing to the effective management of the Company including participation in the planning and execution of its strategy. The role will involve client relationship management with the retention of existing business and the generation of new business as high priorities.
Key responsibilities will include the following:
General
Implement Company policy.
Plan and manage project resources.
Undertake career planning and arrange for effective mentoring and training of employees under your direction.
Offer pro-active advice in relation to problem solving issues.
Oversee compliance with Company’s Quality Management System.
Oversee compliance with Health and Safety practices by those under your direction.
Business Development
Manage client relationships and business development – you will be expected to increasingly expand knowledge on clients, markets and project opportunities to develop existing client relationships and establish new relationships.
Develop regional marketing strategies to promote company to prospective clients, identify new leads and convert them into projects.
Projects
Developing fee proposals and contract reviews and approval of same.
Client liaison.
Undertake project cost control, oversee project cost control by team members and compile project invoices.
Negotiating fee variations with Clients and supervising of same.
Technical
Lead and promote design excellence within the business.
Delivery of sustainable and profitable engineering solutions, and securing repeat business through client satisfaction.
Confidently run multiple projects at various stages and project values with limited Director involvement.
Adopt appropriate design philosophy and develop concept design
Prepare and review designs and design documentation.
KEY QUALIFICATIONS & SKILLS
Candidate must:
Have a Level 8 / 9 Degree in either Civil or Structural Engineering.
Have postgraduate experience, preferably in consulting role(s). Experience on Architect-led projects would be a distinct advantage.
Possess good technical, communication and management skills.
Possess commercial astuteness, in terms of understanding and managing project budgets.
Have the ability to prepare high-quality project reports, chair and prepare meeting minutes.
Be committed to CPD.
Due to the urgency of this vacancy, it is not possible for our client at this time to consider anyone without the appropriate work permits, visas or sponsorship's already in place. Therefore, we are unable to consider candidates who do not have full authorisation to work in the UK. Applications submitted without the necessary visa in place will not be considered.
If the position above is of interest to you and you would like to know more, please call Marie today on 0830104097 in complete confidence.
MC
....Read more...
Are you looking to work with a leading high-performance engineering company in the motorsports industry, specialising in EV technology, offering an unparalleled experience at the forefront of innovation in the Wellingborough area.
As a Principal Control Systems Engineer you will be responsible for the technical aspects of the design, development and testing of software for controlling powertrain components and associated equipment, focusing on delivering solutions to a high quality standard.
Responsibilities:
Own the design, development, test and documentation of the control code for various powertrain components such as including motors, inverters, chargers, DC-DC’s and vehicle/powertrain control units and the associated equipment (i.e. manufacturing and test equipment).
Define a standardised approach to the control architecture, following industry best practice and functional safety considerations.
With support from Functional Safety Engineers, specify the functional and safety requirements for the system and ensure alignment with other engineering functions such as Electrical Engineering.
As a Principal Control Systems Engineer you will lead the development of device drivers and algorithms for state estimation in vehicle control systems, optimising performance.
To develop fault management strategies appropriate for each application.
Documenting and maintaining the BMS Boundary Diagram, and BMS FMEA.
Define testing procedures for software related functions and supporting tests where necessary.
Working with cross-functional teams to ensure plans are in place for the delivery of supporting software and hardware, identifying resource requirements to maintain on time, on cost and on budget delivery.
Liaise closely with the mechanical and electrical engineering teams to ensure that designs are optimised at all levels, across all departments.
Perform calibration of sensors and instrumentation.
Develop strategies for thermal management of powertrain components.
Integrate vehicle dynamics functions into the vehicle control system code where necessary, such as longitudinal slip control, supported by code generated by vehicle dynamics and simulation engineers.
Support the selection of hardware and software capabilities, particularly control unit selection, I/O allocation, software tools/compiler requirements, etc.
Experience required:
Degree in Software / Hardware / Electronics / Electrical Engineering or other relevant Engineering degree
Experience in design and delivery of automotive powertrain control systems from design to launch/production in automotive or motorsport applications as part of an OEM, Tier 1, or consultancy.
Extensive knowledge of ICE & EV powertrain components and architectures.
A high level of competency with typical software coding tools and software validation tools such as Matlab, Simulink, C++, etc.
Familiarity with Functional Safety methodology and requirements.
Experience with developing vehicle control systems for ICE and/or electric vehicles
A good understanding of vehicle test and approval standards
Benefits include:
25 days holiday, plus Bank Holidays (increasing to 30 with service)
On-site gym
Employee assistance and wellbeing programme
Private healthcare
Company pension scheme
Retail discounts
Discounted car scheme
Cycle to work scheme
Death in service cover
If you are the Principal Control Systems Engineer for this role then please apply or contact me on 07584 591 222 to discuss further.
....Read more...
Principal Engineer Development and Integration | Telecoms | Gibraltar
Principal Engineer Development and Integration required for an exciting Telecoms company based in Gibraltar. You will lead a team and technical function that ensures the delivery of an effective, efficient, and productive environment which can cope with the fluctuations and demands of the business, within the confines of policies and budgets.
What's on offer to you?
Managed Service provider
Great career options
Excellent team culture
What You Will Be Doing
Lead a technical function as determined by the Company, in relation to a specific remit of technology and/or infrastructure, across relevant markets and countries.
Strive for 100% availability of the customer-facing service.
Operationally maintain and continuously improve the technical function.
Dimension the technical function in line with business requirements, including growth and sparing.
Apply best practices as defined by standardisation committees, industry bodies and vendors.
Track vendors’ technology evolutions and lifecycle.
Lead the planning, development, design, engineering, architecture, integration, testing, acceptance, optimisation, and implementation activities of the technical function.
Be responsible and accountable for the quality and performance of the technical function.
Coordinate and assure security aspects of the technical function.
Manage the resolution of customer-initiated complaints and defects within committed service levels attributed to the technical function.
Lead and manage the delivery of projects within the specific remit of the technical function.
Be responsible and accountable for drafting, collating, and maintaining a repository of documentation in relation to the technical function.
What You Will Need to Succeed In This Role
Expert-level in various programming and scripting languages (Python, Bash).
Proficient with database technologies – Oracle, PostgreSQL and MySQL.
Proficient with working with Unix and Linux based server architectures.
Previous experience in leading development teams.
Ability to work with cross-functional teams.
Ability to work in a fast-paced environment and handle multiple tasks simultaneously.
Excellent communication and interpersonal skills.
Knowledge of telecommunication environments essential.
Experience with quality assurance frameworks such as ISO27001 advantageous.
Keywords: Principal Engineer Development and Integration |Gibraltar | Telecoms ....Read more...
Principal Engineer Development and Integration | Telecoms | Gibraltar
Principal Engineer Development and Integration required for an exciting Telecoms company based in Gibraltar. You will lead a team and technical function that ensures the delivery of an effective, efficient, and productive environment which can cope with the fluctuations and demands of the business, within the confines of policies and budgets.
What's on offer to you?
Managed Service provider
Great career options
Excellent team culture
What You Will Be Doing
Lead a technical function as determined by the Company, in relation to a specific remit of technology and/or infrastructure, across relevant markets and countries.
Strive for 100% availability of the customer-facing service.
Operationally maintain and continuously improve the technical function.
Dimension the technical function in line with business requirements, including growth and sparing.
Apply best practices as defined by standardisation committees, industry bodies and vendors.
Track vendors’ technology evolutions and lifecycle.
Lead the planning, development, design, engineering, architecture, integration, testing, acceptance, optimisation, and implementation activities of the technical function.
Be responsible and accountable for the quality and performance of the technical function.
Coordinate and assure security aspects of the technical function.
Manage the resolution of customer-initiated complaints and defects within committed service levels attributed to the technical function.
Lead and manage the delivery of projects within the specific remit of the technical function.
Be responsible and accountable for drafting, collating, and maintaining a repository of documentation in relation to the technical function.
What You Will Need to Succeed In This Role
Expert-level in various programming and scripting languages (Python, Bash).
Proficient with database technologies – Oracle, PostgreSQL and MySQL.
Proficient with working with Unix and Linux based server architectures.
Previous experience in leading development teams.
Ability to work with cross-functional teams.
Ability to work in a fast-paced environment and handle multiple tasks simultaneously.
Excellent communication and interpersonal skills.
Knowledge of telecommunication environments essential.
Experience with quality assurance frameworks such as ISO27001 advantageous.
Keywords: Principal Engineer Development and Integration |Gibraltar | Telecoms ....Read more...
Position: Building Surveyor
Location: Greater Dublin
Salary: Neg DOE + Great Package
The Job:
My Client is seeking an experienced Building Surveyor to join their busy, dynamic team. This is a unique opportunity for a Building Surveyor to broaden their knowledge and experience in a rapidly evolving and expanding Damp and Mould space.
Responsibilities:
Carry out indepth onsite inspections.
Preparing comprehensive reports.
Keep all information updated on company systems.
Customer follow up where required.
Ability to communicate with clients.
Ability to sell onsite.
Ability to plan, manage and monitor surveys and works.
Liaise directly with Operations and Administration Divisions to schedule all surveys and works.
Ensure compliance with current Building Controls and Health and Safety regulations.
Ensure compliance with company policies and procedures.
Any other duties.
Requirements:
Degree qualified as a Building Surveyor or Construction Engineer.
2-3 + years onsite experience.
Chartered is preferred but not essential.
Exceptional communication skills.
Sales experience is an advantage.
Accuracy and attention to detail.
Strong Organisational and administrative skills are essential.
Strong computer skills. Knowledge of Office 365 is essential.
Approachable and friendly communication manner.
Efficient time management.
Good understanding and knowledge of buildings must be evident.
Excellent interpersonal skills.
Be receptive and respectful to the viewpoints and concerns of others.
Be adaptable and flexible and able to cope with an evolving role.
Be innovative and forward thinking.
Bring a positive and enthusiastic approach to the role.
Must at all times remember confidentiality is essential.
Have tact and diplomacy.
Due to the urgency of this vacancy, it is not possible for our client at this time to consider anyone without the appropriate work permits, visas or sponsorship's already in place. Therefore, we are unable to consider candidates who do not have full authorisation to work in Ireland. Applications submitted without the necessary visa in place will not be considered.
SOB
....Read more...
Are you passionate about creating clear, concise, and informative technical documentation?
Do you have an ability for transforming complex technical information into easily understandable materials?
If so, we have the perfect opportunity for you!! We are currently looking to recruit an experienced Technical Publication Engineer to join our clients’ engineering team, supporting both internal and external stakeholders with the following:
Generation and delivery of Technical Publication Documents to customers, potentially including Product Manuals, Repair Manuals, User Guides, Service Bulletins, CMM’s, Service Letters, Temporary Revisions and Service Manuals
Act as the point of contact for customers and technical authorities for all technical documentation queries
Develop and manage publishing software tools required by the business
Main Responsibilities:
Authoring and publishing documentation to high standards that serve the customer’s needs to service and maintain the companies range of products
Work with design data and guidance materials to produce quality and compliant documentation
Take responsibility of progress of technical publications documentations against project plan(s) to ensure documentations are available when expected and required by the customer
To ensure existing CMM’s are maintained, revision controlled and communicated with customers in a timely manner.
Build strong relationships both internally and externally with all relevant parties including but not limited to engineering, production, quality assurance, customers, suppliers, aircraft manufacturers, external (A)DOA organisations
Understand the product limitations based on airworthiness, certification basis and/or design, and ensure the documentations generated are a true representation of these limitations
Key Experience Requirements:
Ideally educated to a minimum HNC / HND level in a technical / engineering discipline
Previous experience working as a Technical Publications Engineer / Technical Author / Technical Writer, ideally within an Aerospace / Aviation environment
Previous experience of authoring product publication with both Mechanical & Electrical Components
Good knowledge of publishing software and tools
Previous experience of Commercial Aviation and International Standards / Approvals and Certifications is highly desirable
Previous Experience of ISO9001 and AS9100
If you’re ready to take the next step in your career and be part of a company that will value your skills and contribution and can offer career progression opportunities, including allowing you the exciting opportunity of developing their Technical Publications capability further we want to hear from you.....Read more...
CBW Staffing Solutions are recruiting for experienced Maintenance Joiners/Fabric Engineers, who will play a crucial role in ensuring the structural integrity and visual appeal of our clients' buildings. You will be responsible for conducting a wide range of maintenance, repair, and refurbishment tasks on both joinery and fabric elements. This dual role requires versatility, technical expertise, and a commitment to delivering high-quality workmanship. This role will predominantly be covering the County Durham & surrounding areas. Package:Competitive salary up to £34,000 per annum (depending on experience)Van & fuel card suppliedCore hours are Monday - Friday (40 hours per week)Participation in an ‘out of hours’ on call rota (to be confirmed)25 days annual leave plus bank holidaysGenerous workplace pension schemeTraining, development & progression opportunitiesResponsibilities:Conduct inspections of building fabric elements, such as walls, ceilings, floors, and roofs, to identify and address maintenance needsPerform repairs and renovations on fabric components using appropriate materials and techniquesInstall, repair, and maintain joinery elements, including doors, windows, cabinets, and fixturesCoordinate with contractors and vendors for specialised fabric-related services, such as upholstery repairs and other outsourced servicesUphold cleanliness and appearance standards for fabric surfaces and finishes throughout the facilityAdhere to safety protocols and regulatory requirements to maintain a secure working environmentQualifications:Qualified to NVQ Level 3 in Joinery/Carpentry (desired, but not essential)Proven experience as a Maintenance Joiner, Fabric Engineer, or similar role within the facilities management industryStrong knowledge of building fabric materials, construction methods, and repair techniquesProficiency in conducting fabric repairs, joinery installations, and maintenance tasksAttention to detail and a commitment to delivering high-quality workmanshipAbility to work independently and as part of a teamEffective communication and problem-solving skillsIf you are a skilled Maintenance Joiner/Fabric Engineer looking for a rewarding career opportunity, please apply with your full CV or contact Aaron Rutter at CBW Staffing Solutions.....Read more...
