Avionic System Design Engineer required to work as part of a team across aircraft, aviation and satellite connectivity.
Requirements
Avionics systems and SATCOM technology experience of Iridium, Inmarsat, Viasat, Starlink or similar.
DOORS, JAMA or similar systems engineering tool knowledge.
BEng in Electronics Engineering or related ideally with postgrad qualifications.
UAV regulations, safety standards ARP4754, ARP4761, DO178 or DO254 desirable.
Role
Avionic system design, development, and implementation.
SATCOM system integration of Iridium, Inmarsat, Viasat, Starlink.
Design review including testing, validation and regulatory compliance.....Read more...
A rapidly growing start-up company in energy sector based in Lincolnshire is looking for a Senior Firmware Engineer. You will be joining its electric vehicle team working on product designing, prototyping and testing with the following responsibilities.
Embedded with MISRA C
Candidate requirements.
A relevant degree in Engineering
Embedded C on 32 Bit Platforms.
Experience in secure communication.
Hands-on experience with TCP/IP protocols, TLS and X.509, certificate management.
Working towards chartered engineering or equivalent work experience.....Read more...
Holt Executive is Hiring GNC Engineer (Space Missions) Holt Executive is partnering with a pioneering space technology company to find a GNC Engineer to join their expert team. This is an exciting opportunity to contribute to the development of cutting-edge space guidance, navigation, and control (GNC) systems, enabling complex rendezvous, proximity operations, and docking (RPO) missions.
About the Role: As a GNC Engineer, you will play a key role in designing, optimizing, and testing GNC algorithms and simulation models to support advanced space missions. You will work on sensor technologies, fault detection processes, and system integration, ensuring mission success through robust and innovative engineering solutions.
This role is ideal for an engineer with experience in GNC algorithm development, spacecraft simulations, and system-level analysis, looking to work on game-changing space sustainability missions.
Key Responsibilities:
- Design, optimize, and test GNC algorithms (e.g., navigation filters, guidance strategies, and controllers).
- Develop GNC simulation models and functionalities for mission analysis.
- Support trade-off analysis and integration of state-of-the-art RPO sensors and data fusion techniques.
- Contribute to Failure Mode, Effects, and Criticality Analysis (FMECA) and Fault Detection, Isolation, and Recovery (FDIR) processes.
- Perform GNC subsystem verification, validation, and spacecraft integration testing.
- Work with Engineering Model (EM) hardware to conduct subsystem development testing.
- Support both development-focused and production-focused GNC activities, including Quality Assurance (QA) processes.
Essential Skills:
- Degree in Aerospace Engineering or a related technical field.
- Experience with GNC simulation tools such as MATLAB/Simulink and Python.
- Hands-on experience designing navigation filters, guidance algorithms, and control systems.
- Strong understanding of fault-tolerant GNC system design.
- Experience with Systems Engineering principles and processes.
- Ability to work independently and within cross-functional teams.
- Strong problem-solving skills with a balance between creative innovation and delivery-focused engineering.
Desirable Skills:
- Knowledge of GNC rendezvous and pose estimation sensors and techniques.
- Experience in GNC hardware Assembly, Integration, and Verification (AIV).
- Familiarity with Active Debris Removal (ADR) and RPO mission concepts, such as RemoveDebris, ESAs CleanSpace projects, DARPA Express, or DEOS.
Whats on Offer?
- Competitive salary and benefits package.
- Work with a highly skilled, international team on cutting-edge space technology.
- Hybrid working and flexible schedule options.
- Private healthcare, life insurance, and relocation support.
- Access to state-of-the-art office and cleanroom facilities.
- Regular social events and professional development opportunities.
If youre passionate about advancing space mission GNC systems, apply today or contact Holt Executive for more details!....Read more...
Maintenance EngineerMansfield £30,000 - £35,500 + Product Training + Work Life Balance + Stability + Family - feel + Job Satisfaction + Holiday + Overtime + Flexibility Stabilise your career and benefit from a great work life balance as a Maintenance Engineer where you will receive full on the job training to do your job to the best of your ability and have every day job satisfaction. You will enjoy a varied role working with a tight knit team in a family - feel environment where you will be appreciated and looked after for the long term.This manufacturing company is well established in their specialised industry and have recently invested in new machinery. Due to increased demand, they are looking for an additional Maintenance Engineer to play a pivotal role and come on board to help contribute to their consistent workload.The role as a Maintenance Engineer will include: * Service, repairs, breakdowns and overall maintenance of machinery * Site based role In Mansfield * Day shift role - 6:00 - 14:00 pm (flex)The successful Maintenance Engineer will have: * Mechanical / electrical experience In a maintenance environment * Minimum engineering qualification - preferred * Ability to commute to the Mansfield areaIf interested in this role please contact Rebecka on 07458163046 for further information.Keywords: Maintenance Engineer, Shift engineer, maintenance, maintenance technician,, building maintenance, FMCG Maintenance ,Shift Engineer ,Day shift engineer,Electrical engineer, mechanical engineer, Multi-skilled engineer, Mechanical / electrical engineer, Level 2, City and guilds, Aerospace engineer,Avionic engineer, welder, fabricator cnc engineer, cnc technician,Service engineer, PPM Engineer, preventative maintenance , breakdown engineer,Reliability engineer,site based engineer, installation engineer, Multiskilled Maintenance Engineer, Multi-skilled Maintenance Engineer, Mechanical Fitter, Maintenance Electrician, Masfield,Nottingham,Ashbourne,Delby,Chesterfield,Dronfield,Worksop,Retford,Matlock,Newark on Trent,Long eaton,CoalvileThis vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.Future Engineering Recruitment Ltd are that of an Employment Agency.Please visit our website to view other positions we are currently handling.Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.....Read more...
Security Cleared Firmware Engineer – DSP Engineer - Cambridge – Spin-Out Company
A new Spin-Out company, based in Cambridge, providing product development for Security Cleared sectors, is currently looking for an experienced Firmware Engineer or DSP Engineer to work on a wide range of new technologies.
You will be working on a range of new technology inventions, providing expert approaches to Firmware Engineering and DSP Engineering applications. Due to the varied nature of the work, we ideally seek someone with knowledge of FPGA, DSP design and engineering, DSP Modelling, and design using embedded systems. Not all of these areas are required, but having experience in as many as possible in your past roles as a Firmware Engineer or DSP Engineer would be advantageous.
Specific experience working on high-speed electronic systems would be ideal but is not essential.
If you have previously worked in a security-cleared environment, it would be fantastic, although not essential as they are open to candidates from different sectors. However, you must be able to obtain security clearance. This usually means being a British Citizen or residing in the UK for five years in continuous employment. If you already hold security clearance from another source, this would be acceptable.
You are going to work on some extremely interesting projects that will help you continually develop your career. Apart from this, you will receive an excellent starting salary and a benefits package in line with the parent company, along with continuous career training for future progression.
We are looking for someone to start as soon as possible, so if you are interested, we recommend making an application now to avoid missing out. However, we understand you may have a long notice period, which can be normal in this sector.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on 0121 268 2240, or submit an application, and one of our team members at Newton Colmore will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Lead Product Engineer Stoke-on-Trent £50,000 - £70,000 Basic + Overtime (OTE £70,000+) + Pension + Healthcare + Training + Immediate Start Unlock your potential with a company that truly invests in your growth as an experienced Lead Product Engineer. This is your chance to work with an industry leader, where every day brings new challenges and opportunities to enhance your skills in automation engineering. As a recognised market leader known for technical excellence, this company offers unparalleled training and career progression. If you're a Product Engineer and ready to step into a senior role and be part of a team that values and rewards your hard work, this is the opportunity you've been waiting for!
The Lead Product Engineer role will include:
Overseeing the design, development, and implementation of PLC automation systems, focusing on conveyor systems.
Leading a team, collaborating with stakeholders, and ensuring the successful integration of automation systems.
Engaging in day-to-day programming and providing technical leadership within the team.
Working on a range of projects, from small to large-scale, based on the team’s needs.
The successful Lead Product Engineer will have:
Proven experience in PLC programming and automation systems.
Experience in working with PLCs specifically with conveyer systems.
Strong problem-solving skills.
Excellent communication and teamwork skills.
For immediate consideration, contact Wesley on 020 4578 4570 or apply today. Keywords: product engineer, engineering, PLC, automation, controls, project management, technical lead, industrial control, HMI, problem-solving, control system, system, development, programming, manufacturing, Stoke, United Kingdom.This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website at futureengineer.co.uk to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants; however, due to the sheer volume of responses, we can only guarantee that shortlisted candidates will be contacted.....Read more...
An opportunity has arisen for a Lead Fire Engineer to join an established consultancy providing fire safety engineering services. This full-time, permanent role offers excellent benefits and a salary range of £45,000 - £63,000.
As a Lead Fire Engineer, you will be leading and delivering fire engineering strategies and solutions for complex building projects while liaising closely with stakeholders.
You will be responsible for
* Preparing technical documentation including fee proposals and fire strategy reports
* Conducting site visits, attending meetings, and communicating strategies with clients and design teams
* Assessing architectural plans to identify compliance risks and value-engineering opportunities
* Performing evacuation time calculations and analysing means of escape
* Supporting evacuation modelling and fire dynamics simulations
* Providing technical input into radiant heat, smoke control, and occupant movement calculations
* Reviewing designs from third parties for compliance and verification
What we are looking for
* Previously worked as a Fire Engineer, Fire safety Engineer, Fire Safety consultant, Fire Consultant or in a similar role.
* At least 3 years of experience in a fire safety consultancy, with hands-on project delivery
* Solid understanding of Approved Document B, BS 9999 and BS 9991
* A degree in Fire Engineering or a related engineering field
* Working knowledge of UK regulatory requirements in the built environment
* Membership with the Institution of Fire Engineers (AIFireE or MIFireE)
* Confident communicator with strong technical writing skills
What's on offer
* Competitive salary
* Discretionary bonus scheme paid biannually
* Hybrid working with a focus on true work/life balance
* 33 days holiday including bank holidays
* Option to participate in a 9-day fortnight schedule
* Company pension scheme with enhanced employer contributions
* Paid annual professional memberships
* Private healthcare access and employee wellbeing support
* Cycle to work scheme, enhanced leave policies and more
This is a fantastic opportunity for a Fire Engineer to join a highly regarded consultancy and play a key role in shaping safe, compliant, and innovative buildings.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
The successful candidate will receive training in:
Knowledge of Health and Safety requirements including correct use of PPE, workspace cleanliness, COSHH
A sound understanding of both manual and CNC Milling
The candidate will operate CNC 5-Axis machining centres manufacturing parts to satisfy existing orders and helping to develop prototype parts for potential new business.
Experience working on Fanuc machine centres on both horizontal and vertical machines (Fanuc operating systems).
Experience working on CNC Milling & deep hole drilling machine centres (Fanuc Operating systems)
Verify conformity of parts using gauges – sending first off parts for CMM measurement along with an understanding of measurement reports
Work with Technical/Quality engineers to improve the processes and working environment
Ability to understand operation and method sheets
Working with Standard Operating Procedures
Understand engineering drawings (geometric tolerancing)
Experience working in an engineering environment
Programming experience
Ability to work under pressure
Training:You will study on a Level 3 Machining Technician pathway. On completion of this, you will gain a qualification in Engineering at Level 3 standard.
During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for an initial block of study on a full-time basis. After this, you will attend the Training Centre for one day a week for knowledge study.Training Outcome:Completion of the University of Sheffield’s AMRC Training Centre apprenticeships are nationally recognised qualifications which are acknowledged and respected by employers across the world. These can open the door to many more opportunities, such as Engineering Management and Project Engineering positions across a range of sectors worldwide.Employer Description:Bifrangi manufactures components for the agricultural, off-highway, marine, power generation, and mining sectors.
We are world leaders in closed die forging and finished machining large crankshafts up to 750 kg in weight. Bifrangi UK Ltd offers a fully integrated service from initial design to the supply of finished products to customers worldwide.Working Hours :You will work Monday to Friday. Your start and finish times including your shift pattern will be determined by the employing company.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills....Read more...
The successful candidate will receive training in:
Knowledge of Health and Safety requirements including correct use of PPE, workspace cleanliness, COSHH
A sound understanding of CNC milling and CNC turning
The candidate will operate CNC lathes and CNC milling machines to manufacturing parts to satisfy existing orders and helping to develop prototype parts for potential new business
Experience working on Mazak machine centres and CNC lathes (Mazatrol & Fanuc operating systems)
Verify conformity of parts using gauges – sending first off parts for CMM measurement along with an understanding of measurement reports
Work with Technical/Quality Engineers to improve the processes and working environment
Ability to understand operation and method sheets
Working with Standard Operating Procedures
Understand engineering drawings (geometric tolerancing)
Experience working in an engineering environment
Programming experience
Ability to work under pressure
Training:You will study on a Level 3 Machining Technician pathway. On completion of this, you will gain a qualification in Engineering at Level 3 standard.
During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for an initial block of study on a full-time basis. After this, you will attend the Training Centre for one day a week for knowledge study.Training Outcome:Completion of the University of Sheffield’s AMRC Training Centre apprenticeships are nationally recognised qualifications which are acknowledged and respected by employers across the world. These can open the door to many more opportunities, such as Engineering Management and Project Engineering positions across a range of sectors worldwide.Employer Description:Bifrangi manufactures components for the agricultural, off-highway, marine, power generation, and mining sectors.
We are world leaders in closed die forging and finished machining large crankshafts up to 750 kg in weight. Bifrangi UK Ltd offers a fully integrated service from initial design to the supply of finished products to customers worldwide.Working Hours :You will work Monday to Friday. Your start and finish times including your shift pattern will be determined by the employing company.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills....Read more...
The successful candidate will receive training in:
Knowledge of Health and Safety requirements including correct use of PPE, workspace cleanliness, COSHH
A complete understanding of CNC turning and the relevant programming languages
The candidate will operate CNC lathes and machining centres manufacturing parts to satisfy existing orders and helping to develop prototype parts for potential new business
Experience working on CNC lathes (Siemens & Fanuc operating systems)
Programming experience varying in complexity
Verify conformity of parts using gauges - sending first off parts for CMM measurement along with an understanding of measurement reports
Work with Technical/Quality engineers to improve the processes and working environment
Ability to understand operation and method sheets
Working with Standard Operating Procedures
Understand engineering drawings (geometric tolerancing)
Experience working in an engineering environment
Ability to work under pressure
Training:You will study on a Level 3 Machining Technician pathway. On completion of this, you will gain a qualification in Engineering at Level 3 standard.
During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for an initial block of study on a full-time basis. After this, you will attend the Training Centre for one day a week for knowledge study.Training Outcome:Completion of the University of Sheffield’s AMRC Training Centre apprenticeships are nationally recognised qualifications which are acknowledged and respected by employers across the world. These can open the door to many more opportunities, such as Engineering Management and Project Engineering positions across a range of sectors worldwide.Employer Description:Bifrangi manufactures components for the agricultural, off-highway, marine, power generation, and mining sectors.
We are world leaders in closed die forging and finished machining large crankshafts up to 750 kg in weight. Bifrangi UK Ltd offers a fully integrated service from initial design to the supply of finished products to customers worldwide.Working Hours :You will work Monday to Friday. Your start and finish times including your shift pattern will be determined by the employing company.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills....Read more...
The successful candidate will receive training in:
Knowledge of Health and Safety requirements including correct use of PPE, workspace cleanliness, COSHH
A complete understanding of 3-Axis, multi-head CNC Milling
The candidate will operate CNC milling machining centres manufacturing parts to satisfy existing orders and helping to develop prototype parts for potential new business
Experience working on Fanuc operated machine centres (Fanuc operating systems)
Experience working on CNC Milling & multi-head machine centres (Fanuc Operating systems)
Verify conformity of parts using gauges – sending first off parts for CMM measurement along with an understanding of measurement reports.
Work with Technical/Quality engineers to improve the processes and working environment
Ability to understand operation and method sheets
Working with Standard Operating Procedures
Understand engineering drawings (geometric tolerancing)
Experience working in an engineering environment
Programming experience
Ability to work under pressure
Training:You will study on a Level 3 Machining Technician pathway. On completion of this, you will gain a qualification in Engineering at Level 3 standard.
During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for an initial block of study on a full-time basis. After this, you will attend the Training Centre for one day a week for knowledge study.Training Outcome:Completion of the University of Sheffield’s AMRC Training Centre apprenticeships are nationally recognised qualifications which are acknowledged and respected by employers across the world. These can open the door to many more opportunities, such as Engineering Management and Project Engineering positions across a range of sectors worldwide.Employer Description:Bifrangi manufactures components for the agricultural, off-highway, marine, power generation, and mining sectors.
We are world leaders in closed die forging and finished machining large crankshafts up to 750 kg in weight. Bifrangi UK Ltd offers a fully integrated service from initial design to the supply of finished products to customers worldwide.Working Hours :You will work Monday to Friday. Your start and finish times including your shift pattern will be determined by the employing company.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills....Read more...
Aviation Engineering Manager required to lead a cutting edge flight test engineering team.
Requirements
Leadership experience managing flight test teams in aviation or aerospace.
Aviation Regulation experience ideally at ???Part 21??? organization.
Flight science knowledge of safety critical systems.
Software and hardware systems test, evaluation and improvement understanding.
DO 160 environmental test requirements and DO standards.
Structural loading evaluation and supplier management.
Role
Lead and manage a flight test team.
Oversee ground and flight test activities for certification.
Flight test post holder for P21J Design.
Manage the configuration and maintenance of test tools and equipment.....Read more...
Customer Services Executive required to join an industrial engineering aftersales support team who support industrial capital equipment customers and maximise account revenue.
Requirements
Engineering Equipment after sales support experience.
School qualification or office based apprenticeship.
Role
Ensuring our customers have the best equipment ownership experience possible.
Develop a relationships with customers, understand their business industry and sell the appropriate services.
Upgrade and renew service and support contracts.
Own first line customer contact, telephone, email or other.
Relay customer service requirements efficiently to the Field Service Team.
Generate new Installation documentation for the service team.....Read more...
Customer Services Executive required to join an industrial engineering aftersales support team who support industrial capital equipment customers and maximise account revenue.
Requirements
Engineering Equipment after sales support experience.
School qualification or office based apprenticeship.
Role
Ensuring our customers have the best equipment ownership experience possible.
Develop a relationships with customers, understand their business industry and sell the appropriate services.
Upgrade and renew service and support contracts.
Own first line customer contact, telephone, email or other.
Relay customer service requirements efficiently to the Field Service Team.
Generate new Installation documentation for the service team.....Read more...
Aviation Engineering Manager required to lead a cutting edge flight test engineering team.
Requirements
Leadership experience managing flight test teams in aviation or aerospace.
Aviation Regulation experience ideally at ???Part 21??? organization.
Flight science knowledge of safety critical systems.
Software and hardware systems test, evaluation and improvement understanding.
DO 160 environmental test requirements and DO standards.
Structural loading evaluation and supplier management.
Role
Lead and manage a flight test team.
Oversee ground and flight test activities for certification.
Flight test post holder for P21J Design.
Manage the configuration and maintenance of test tools and equipment.....Read more...
Customer Services Executive required to join an industrial engineering aftersales support team who support industrial capital equipment customers and maximise account revenue.
Requirements
Engineering Equipment after sales support experience.
School qualification or office based apprenticeship.
Role
Ensuring our customers have the best equipment ownership experience possible.
Develop a relationships with customers, understand their business industry and sell the appropriate services.
Upgrade and renew service and support contracts.
Own first line customer contact, telephone, email or other.
Relay customer service requirements efficiently to the Field Service Team.
Generate new Installation documentation for the service team.....Read more...
Customer Services Executive required to join an industrial engineering aftersales support team who support industrial capital equipment customers and maximise account revenue.
Requirements
Engineering Equipment after sales support experience.
School qualification or office based apprenticeship.
Role
Ensuring our customers have the best equipment ownership experience possible.
Develop a relationships with customers, understand their business industry and sell the appropriate services.
Upgrade and renew service and support contracts.
Own first line customer contact, telephone, email or other.
Relay customer service requirements efficiently to the Field Service Team.
Generate new Installation documentation for the service team.....Read more...
An exciting opportunity has arisen for an Electronic PCB Layout Engineer based in Great Yarmouth, Norfolk, to join a leading engineering company that design a range of electronic systems for aerospace and defence applications.
The main purpose of the Electronic PCB Layout Engineer role, based in Great Yarmouth, Norfolk, is to provide microelectronic product design expertise from new product introduction through to product launch. You will be developing cutting edge technologies on both PCBA and thick film hybrid circuit layouts.
Some of the key experiences and competencies for the Electronic PCB Layout Engineer, based in Great Yarmouth, Norfolk will require familiarity with PCBA techniques along with exposure to mechanical packaging / CAD package.
This is a great opportunity to join a highly successful, multi-national engineering company with a fantastic working environment and benefits.
Apply Now, if this Electronic PCB Layout Engineer job based in Great Yarmouth, Norfolk sounds like the opportunity for you, click the APPLY NOW button, or alternatively call Tom Drew on 01582 878 848 or email TDrew@redlinegroup.Com quoting THD1298. Alternatively, if this job is not suitable but you are looking for a job within Engineering, please call 07961158762 for a confidential discussion.....Read more...
Are you looking for a Lead Electrical Engineer job based in Brinsworth, Rotherham?
This is a fantastic opportunity to join a world leading company in the gases and engineering industry, operating in over 100 countries across the globe.
This Lead Electrical Engineer based in Brinsworth, Rotherham will be responsible for guidance and support on a wide range of equipment, including power distribution, rotating machinery, and a vast array of electrical control equipment.
The ideal candidate for the Lead Electrical Engineer Job, Brinsworth, Rotherham will ideally have experience of working on low and high voltage electrical systems up to circa 33,000 volts, with an understanding of safety rules and standards. You will ideally be educated to degree level in a relevant subject to electrical engineering. In addition to this you will have previously worked within a highly regulated environment, such as COMAH.
APPLY NOW! If you are interested in the Lead Electrical Engineer Job, Brinsworth, Rotherham please send a CV and covering letter to TDrew@redlinegroup.Com quoting ref THD1321. Otherwise we always welcome the opportunity to discuss other roles similar to Electrical Engineering jobs on 01582 878848 or 07961158762.....Read more...
Maintenance EngineerSpalding£48,000 - £53,000 Basic + Overtime + Night Shift + External Training Looking for a secure and stable maintenance engineer role? Great opportunity for an experienced candidate to join a well-established fresh produce business offering a competitive package, training, and long-term job security.This family-owned business is dedicated to growing and packaging fresh produce for high-street retailers. With a strong team culture and a commitment to high standards, they are looking for a skilled maintenance engineer to help maintain smooth production.
Your Role as Maintenance Engineer:
* Reactive & planned maintenance on production machinery
* Diagnose and resolve mechanical & electrical faults
* Support engineering projects and continuous improvement initiatives
* Permanent Night Shift, 223 shift pattern
What You’ll Need:
* Experience as a Maintenance Engineer in an FMCG or industrial environment
* Electrical or Mechanical qualifications (NVQ Level 3 / BTEC L3 or equivalent)
* Strong fault-finding and problem-solving skillsApply now or call Masoud on 07537153909 for more information.
Keywords: Maintenance Engineer, Electrical Maintenance Engineer, Mechanical Maintenance Engineer, Multiskilled Engineer,Mechanical, maintenance, FMCG, Manufacturing, Engineer, PPM, Reactive Maintenance, Lincoln, Lincolnshire, Spalding, Holbeach, BostonThis vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
Maintenance EngineerWythenshawe
£45,000 - £50,000 Basic + 4 on 4 off + On the Job Training + Stability
Looking for a secure and stable maintenance engineer role? Great opportunity for an experienced candidate to join an exciting and growing food manufacturing business offering a competitive package and long-term job security.
This company is a growing food manufacturer supplying high-quality frozen meals to a range of customers. They’re focused on building a reliable team of skilled engineers to support their continued success.
Your Role as Maintenance Engineer:
Perform planned preventative maintenance and breakdown repairs
Conduct maintenance and repairs around the plant
Assist with engineering projects and continuous improvement initiatives
What You’ll Need:
Electrical qualification (17th Edition)
Experience as a Maintenance Engineer in an FMCG environment
Strong fault-finding and problem-solving skills
Apply now or call Masoud on 07537153909.Keywords: Maintenance Engineer, Electrical Maintenance Engineer, Engineer, Maintenance, Electrical, Mechanical, Multiskilled, Manchester, Cheshire, Wythenshawe, Gatley, Cheadle, Stockport, Food, FMCGThis vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
Machine Operator
Livingston
£37,000 - £39,000 Basic + Stability + Job Satisfaction + Mon - Fri (3 shift) + Family Feel + Appreciation + Optional Overtime + Flexibility + Generous Pension + Low Staff Turnover + Immediate Start Looking to solidify your career in a family feel company where you will benefit from everyday job satisfaction? Join this recession proof industry as a Machine operator where you will benefit from stability and longevity in an environment where the culture is the forefront of the business! This company is well established, holds a great reputation within the industry and specialises in manufacturing forged components. Due to consistent growth and brand new machinery, they are looking for a machine operator to come and join the team. Be valued and rewarded and work somewhere where you will not be just another number. Join now and enjoy work everyday where the company culture cannot be beaten! The Successful machine operator Will Have: * Previous Experience Operating manufacturing machinery Or Similar * Experience of working in a heavy industrial or engineering environment. * Commutable To The Livingston Area The Role Of The machine operator Will Include: * Operation Of forge machinery * 3 shift rotation * Site Based Role In Livingston Area Please Apply Below Or Ask For Call Eran on 07458163044 Keywords: Manufacturing operator, manufacturing operative, forge operator, forging, metal, titanium, nickel, stainless steel, Press Brake Operator, Press Brake, Operator, Operating, Setting, Programming, CNC, Press Brake Machines, Bystronic, CNC Machines, Laser, Sheet Metal, Cutting, Manufacturing, Engineer, Engineering, ex military ,Military, Scotland,Livingston, Edinburgh, Glasgow, Falkirk, Motherwell This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd is that of an Employment Agency. ....Read more...
Chief Quality Inspector
Location: Reading
Salary: c. £45k
Holt Engineering are seeking a highly experienced and meticulous Chief Quality Inspector to join our clients dynamic team. If you possess a strong background in precision engineering, a deep understanding of aerospace quality standards, and proficiency in Aberlink CMM operation, we want to hear from you!
Chief Quality Inspector Overview:
As our Chief Mechanical Quality Inspector, you will be responsible for ensuring the highest quality standards are met throughout our manufacturing processes, particularly in the production of aerospace components and sheet metal fabrications. You will lead a team of inspectors, oversee inspection procedures, and utilise your expertise with Aberlink CMM to guarantee dimensional accuracy and compliance.
Chief Quality Inspector Responsibilities:
- Develop and implement inspection procedures and quality control plans.
- Perform detailed inspections of aerospace components and sheet metal fabrications using Aberlink CMM and other precision measuring equipment.
- Program and operate Aberlink CMM to perform complex dimensional inspections.
- Interpret engineering drawings, specifications, and GD&T (Geometric Dimensioning and Tolerancing).
- Identify and resolve quality issues, implementing corrective and preventative actions.
- Maintain accurate inspection records and documentation.
- Ensure compliance with AS9100 and other relevant aerospace quality standards.
- Conduct internal audits and participate in external audits.
Chief Quality Inspector Requirements:
- Extensive experience as a Quality Inspector in the aerospace industry.
- Proven proficiency in programming and operating Aberlink CMM.
- Strong understanding of aerospace quality standards (AS9100).
- Experience with sheet metal fabrication inspection.
- Expertise in interpreting engineering drawings and GD&T.
- Excellent knowledge of precision measuring equipment and techniques.
- Excellent problem-solving and analytical skills.
- Strong attention to detail and a commitment to quality.
Chief Quality Inspector Benefits:
- 4 day working week.
- Competitive salary based on experience and skills.
- Opportunity for professional growth and development in a leading aerospace company.
- Access to state-of-the-art inspection equipment and technology.
- Supportive and collaborative team environment.
- Overtime opportunities may be available.
How to apply for the Chief Quality Inspector role:
If you have the skills required, please apply directly or contact Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk....Read more...
Key Responsibilities:
Assist in the maintenance and repair of production machinery, including presses, CNC machines, and automated equipment.
Learn to diagnose mechanical and electrical faults and carry out effective repairs.
Support planned preventative maintenance (PPM) schedules to reduce downtime.
Work with a variety of tools and equipment, including hydraulic and pneumatic systems.
Assist in installing, upgrading, and modifying machinery to improve production efficiency.
Read and interpret technical drawings and manuals.
Follow health and safety procedures to maintain a safe working environment.
Work towards achieving a recognised engineering qualification.
Training:This is a 4 year Level 3 Mechatronics qualification.You will be required to attend the training centre, In-Comm Training Services in Telford, TF3 3AJ, through a part-time pathway to undertake a variety of engineering training and theory work.Training Outcome:Upon successful completion of the apprenticeship, there will be a full-time position available and further specific training if required.Employer Description:SDE Technology is a company comprised of three operating divisions:
LIGHTWEIGHT ENGINEERING, SURFACE TECHNOLOGIES, and SALOP HAULAGE.
SDE Technology is one of the largest manufacturers of pressings and assemblies in the UK. Based on the outskirts of Shrewsbury in Shropshire, our modern, purpose-built factory is within easy access to the motorway network.
We are a team of highly skilled engineers and light weighting design specialists, led by Richard Homden, son of the founder, who are passionate about adopting cutting edge technology to solve complex engineering problems associated with the manufacture of components, welding and assembly.Working Hours :Monday- Thursday between 7:45am-4:30pm.
Friday 7:45am-12:30pm.Skills: Communication skills,Attention to detail,Organisation skills,Number skills,Logical,Team working,Initiative,Willingness to learn....Read more...
Starting with the fundamentals of how to read drawings and engineering first principles you will assist engineers on producing the drawings for the spatial and technical packs.
Once you have mastered this, we will continue your development with learning how to scheme designs and working with analytical software to assist in the verification of your work.
As a structural engineer apprentice, you will learn to provide technical input to develop design solutions, whilst addressing complex engineering problems that consider the impacts of sustainability, construction methodology and economics.
Training Outcome:Upon completion the apprentice would become a qualified Civil Engineer. Employer Description:Walder Sharp, a leading structural engineering London-based consultancy, is seeking an exceptional Level 6 civil and structural engineer apprentice to join our dynamic team. We would also consider applicants who would be completing a Level 4 course with the understanding upon completion they would progress onto a Level 6 course.
If you are eager to start your career with this exciting opportunity, and to be part of a team with a diverse portfolio of work, we want to hear from you. Our team provides Structural Engineering for TV/Theatre productions, sporting events, music concerts, as well as prime and super prime residential and commercial projects.
We believe that as engineers our designs need to address our client’s brief and their key drivers for the project. Through clear communication, a wealth of technical expertise and conscious awareness of economical and sustainable solutions we work together to deliver their vision.
Check out some of our projects on our socials @waldersharp and our website www.waldersharp.co.ukWorking Hours :Monday to Friday, 9am to 6pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
