Senior FPGA/CPLD Engineer – Greenford or Weymouth - Hybrid We are on the hunt for a Senior FPGA/CPLD Engineer with a wealth of experience in working with legacy CPLD design entry on bespoke PCB’s with a view to moving in the long term to a more modern FPGA based system. Key Responsibilities:
Interpretation of legacy system requirements, ability to transcribe legacy architecture and flow down into firmware requirements
Ensure that the technical solutions meet the customer, legislative and business requirements
Produce project technical documentation in line with project requirements including:
Management Plans
Requirements Specifications
Design Documents
Interface Specifications
Acceptance Tests
Design change requests
Opportunity to act as Project Engineering Lead (PEL) and/or Work Package Manager (WPM) on one or more projects
Experience and Skills:
Experience across the whole project lifecycle as firmware engineer, from bids and proposals through to in-service support (ideally from within the defence sector)
Hands-on experience of designing complex systems involving multiple electronics disciplines and understanding of associated challenges and pitfalls
Used to dealing with a wide range of stakeholders beyond Electronics domain (i.e. Project Management, Systems, Mechanical and Software Engineering) as part of multi-disciplinary project team to resolve issues that arise during the lifespan of a project
Bachelor's Degree in Electrical/Electronic Engineering or a relevant subject, additionally Chartered status or Professional Registration is desirable
Had exposure to any of the following:
Development of Analog and digital technologies
Design for EMC, Electrical Safety & Signal Integrity of firmware, schematic or PCB layout
Firmware development
Familiarity with one or more PMRP and ECAD tools
Design for manufacture, understanding of full project life cycle
Prototyping, test and verification of electronic subsystems (Hardware/Firmware), unit and sub-system level
Use of standard office tools and knowledge of engineering tools such as DOORS, ERPs and other Configuration Management tools
The Candidate must be eligible for SC clearance.
....Read more...
An exciting opportunity has arisen for a Field Service Engineer to join a growing team, providing maintenance, installation, and technical support for essential healthcare equipment across care homes, hospitals, and hospices.
This role is ideal for someone with experience in electrical fault-finding, mechanical repairs, plumbing, and electronic control systems.
You will be responsible for installing, servicing, and troubleshooting a range of capital equipment while ensuring the highest standards of safety and compliance.
Key Responsibilities For a field Service Engineer:
- Maintenance & Repairs
- Perform preventative maintenance, fault diagnosis, and breakdown cover on customer sites.
- Compliance & Quality Assurance Ensure servicing meets EN/HTM standards and participate in ISO compliance procedures.
- Customer Service & Relationship Management Build strong relationships with clients while maintaining a professional and safety-conscious approach.
- Technical Reporting & Feedback Use an electronic task management system to report on job progress and identify commercial opportunities.
- Installation & Commissioning Install and commission washer disinfectors, macerators, and stainless-steel fixtures requiring water and waste services.
What Were Looking For in a Field Service Engineer:
Experience & Skills:
- Proven experience in electrical fault-finding, mechanical repairs, and plumbing installations.
- Strong knowledge of electro-mechanical systems.
- National Certificate, City & Guilds, or equivalent technical qualification.
- Qualifications in HTM 2010 and HTM 2030 are desirable.
- Strong problem-solving skills and ability to work independently.
- Full UK driving licence required.
Personal Attributes for a Field Service Engineer:
- Excellent communication skills, both written and verbal.
- Ability to prioritise workload and work efficiently under pressure.
- Willingness to travel within the UK and occasionally stay overnight when required.
- Comfortable working in healthcare environments and handling waste products.
Whats in It for You?
Company Van & Tools Provided Fully equipped for field-based work.
- 25 Days Annual Leave Increasing with service milestones, plus public holidays.
- Private Medical Insurance Including health cashback plans and discounted gym membership.
- Life Assurance 4x base salary.
- Overtime & On-Call Allowance Extra earning potential.
- Drink & Meal Allowance While working in the field.
- Commission & Bonus Scheme Based on company performance.
- Employee Assistance Program Support for mental health and wellbeing
- Cycle to Work Scheme, Free Flu Jabs & Paid Volunteer Time.
Apply Today!
If youre an experienced Field Service Engineer looking for a role with career progression, excellent benefits, and hands-on technical challenges, we want to hear from you!
Click Apply Now or contact Ian Broadhurst at Holt Engineering on 07734406996 for more information.....Read more...
Working on digital video, radar and high accuracy GPS systems for autosport and road safety applications
A particular focus on programming in C in Linux, on the Raspberry PI
Talk to the client to capture and understand their requirements
Undertake analysis and design to produce highly robust software
Perform tests, code reviews, debugging and refactoring to improve code quality and efficiency
Training:
You will attend Sheffield Hallam University for a number of one-week blocks spread over 3 years
The degree award is BSc (Hons) Digital and Technology Solutions Professional (Software Engineer)
Training Outcome:The employer is ready to invest in training to develop the skills of the successful candidate. This is a long-term career opportunity.Employer Description:We are the UK's #1 manufacturer of advanced race data logging systems and displays which are supplied to individuals and race teams of all levels all over the world. Our particular strengths include high accuracy GPS data loggers, high quality electronic dashboard displays, innovative combined data/video systems all backed up by the best data analysis software in the business.
From GPS speed measurement and brake testing, to data loggers suitable for durability testing. Our range of professional industrial test equipment delivers unbeatable performance and accuracy, combined with peerless backup and support. We deliver data logging equipment and sensors to a huge range of blue chip OEMs all over the world. We are unique in that our PurePhase GPS technology has been developed in house and is purpose designed for automotive testing.
We work with a wide range of blue chip international companies, public organisations, as well as smaller organisations to provide custom solutions. We are very experienced in electronic product development, software development in a range of languages. We have particular expertise in high precision GPS, inertial systems, video, GSM, data logging and CAN communications.Working Hours :Monday - Friday, with shifts to be confirmed.Skills: IT skills,Attention to detail,Problem solving skills,Number skills,Logical,Team working,Initiative....Read more...
Required to join a power grid systems team commissioning electrical transmission Substation Control Systems. This role suits someone with a strong engineering background with experience of power transmission substation commissioning.
Requirements
Experience working on National Grid Substations and Substation Secondary Systems.
National Grid training and qualifications.
BS7671 18th Edition, C&G 2391 Inspection and Testing or similar courses.
Fault finding on electrical and electronic systems.
Current full UK driving license or can easily convert.
Ability to write, develop and refine specifications for commissioning or Test.
Responsibilities
Ensure site installation and commissioning work is carried out to required standards.
Site acceptance test and commissioning against test documentation.
Supervise installation work on site.
Mark up drawings and schematics when changes are identified.
Contribute to commissioning and test documentation.
Prepare site materials, commissioning spares, and test documentation prior to project delivery.....Read more...
Required to join a power grid systems team commissioning electrical transmission Substation Control Systems. This role suits someone with a strong engineering background with experience of power transmission substation commissioning.
Requirements
Experience working on National Grid Substations and Substation Secondary Systems.
National Grid training and qualifications.
BS7671 18th Edition, C&G 2391 Inspection and Testing or similar courses.
Fault finding on electrical and electronic systems.
Current full UK driving license or can easily convert.
Ability to write, develop and refine specifications for commissioning or Test.
Responsibilities
Ensure site installation and commissioning work is carried out to required standards.
Site acceptance test and commissioning against test documentation.
Supervise installation work on site.
Mark up drawings and schematics when changes are identified.
Contribute to commissioning and test documentation.
Prepare site materials, commissioning spares, and test documentation prior to project delivery.....Read more...
Mechanical Precision Engineer
Location: Shropshire / Black Country / Midlands / Central
Package: Circa £40k + Vehicle + Career Advancement + Continuous Training
Hours: Monday – Friday / No nights or shift work
Join a leading Class A OEM specialising in designing, developing, and manufacturing world-class precision machine tools for the manufacturing sector. As technology advances rapidly, we have an exciting opportunity for a highly skilled Mechanical Precision Engineer to refurbish, rectify and fault-find for exceptionally complex, mechanical precision machine tools.
What We're Looking For:
Mechanical machinery & equipment fault finding and repair skills.
Proficiency in Precision Engineering with high tolerance & measurements in Microns.
Understanding of mechanical components and mechanical functions within machine tools.
Experience in mechanical refurbishment.
Proficiency handling specialist tools and equipment within precision and mechanical engineering.
Understanding ofelectronic controls and fitting processes alongside mechanical functionalities.
Knowledge of installing full turnkey lines, interconnecting several pieces of machinery to form a production line ensuring all safety measures and meeting industry standards & conformity.
Desired Skills:
Mechanical engineering qualification.
Experience of working within a precision environment.
Some understanding of electrical / 3 phase electrics & electronic controls would be useful.
Inquisitive nature combining a can do will fix mentality.
Here's the future vision….
Based at our new UK HQ centrally located, this role offers tremendous potential and serves as a springboard into higher positions within our international manufacturing business.
Ready to elevate your career? Apply today and join a team that's pushing the boundaries of precision engineering!
#MechanicalEngineer #Precisionengineering #PrecisionMachinery #JobOpportunity #Manufacturing #EngineeringJobs
Meet the employer:
Short 20 min bite sized meet the employer sessions will be organised with our exclusive recruitment partner, Glen Shepherd. Please get in touch via CV submission & arrange your pre-interview session NOW: Tel 07977 266309 / @
JOB REF: 4224GS....Read more...
Mechanical Precision Engineer
Location: Shropshire / Black Country / Midlands / Central
Package: Circa £40k + Vehicle + Career Advancement + Continuous Training
Hours: Monday – Friday / No nights or shift work
Join a leading Class A OEM specialising in designing, developing, and manufacturing world-class precision machine tools for the manufacturing sector. As technology advances rapidly, we have an exciting opportunity for a highly skilled Mechanical Precision Engineer to refurbish, rectify and fault-find for exceptionally complex, mechanical precision machine tools.
What We're Looking For:
Mechanical machinery & equipment fault finding and repair skills.
Proficiency in Precision Engineering with high tolerance & measurements in Microns.
Understanding of mechanical components and mechanical functions within machine tools.
Experience in mechanical refurbishment.
Proficiency handling specialist tools and equipment within precision and mechanical engineering.
Understanding ofelectronic controls and fitting processes alongside mechanical functionalities.
Knowledge of installing full turnkey lines, interconnecting several pieces of machinery to form a production line ensuring all safety measures and meeting industry standards & conformity.
Desired Skills:
Mechanical engineering qualification.
Experience of working within a precision environment.
Some understanding of electrical / 3 phase electrics & electronic controls would be useful.
Inquisitive nature combining a can do will fix mentality.
Here's the future vision….
Based at our new UK HQ centrally located, this role offers tremendous potential and serves as a springboard into higher positions within our international manufacturing business.
Ready to elevate your career? Apply today and join a team that's pushing the boundaries of precision engineering!
#MechanicalEngineer #Precisionengineering #PrecisionMachinery #JobOpportunity #Manufacturing #EngineeringJobs
Meet the employer:
Short 20 min bite sized meet the employer sessions will be organised with our exclusive recruitment partner, Glen Shepherd. Please get in touch via CV submission & arrange your pre-interview session NOW: Tel 07977 266309 / @
JOB REF: 4224GS....Read more...
Mechanical Precision Engineer
Location: Shropshire / Black Country / Midlands / Central
Package: Circa £40k + Vehicle + Career Advancement + Continuous Training
Hours: Monday – Friday / No nights or shift work
Join a leading Class A OEM specialising in designing, developing, and manufacturing world-class precision machine tools for the manufacturing sector. As technology advances rapidly, we have an exciting opportunity for a highly skilled Mechanical Precision Engineer to refurbish, rectify and fault-find for exceptionally complex, mechanical precision machine tools.
What We're Looking For:
Mechanical machinery & equipment fault finding and repair skills.
Proficiency in Precision Engineering with high tolerance & measurements in Microns.
Understanding of mechanical components and mechanical functions within machine tools.
Experience in mechanical refurbishment.
Proficiency handling specialist tools and equipment within precision and mechanical engineering.
Understanding ofelectronic controls and fitting processes alongside mechanical functionalities.
Knowledge of installing full turnkey lines, interconnecting several pieces of machinery to form a production line ensuring all safety measures and meeting industry standards & conformity.
Desired Skills:
Mechanical engineering qualification.
Experience of working within a precision environment.
Some understanding of electrical / 3 phase electrics & electronic controls would be useful.
Inquisitive nature combining a can do will fix mentality.
Here's the future vision….
Based at our new UK HQ centrally located, this role offers tremendous potential and serves as a springboard into higher positions within our international manufacturing business.
Ready to elevate your career? Apply today and join a team that's pushing the boundaries of precision engineering!
#MechanicalEngineer #Precisionengineering #PrecisionMachinery #JobOpportunity #Manufacturing #EngineeringJobs
Meet the employer:
Short 20 min bite sized meet the employer sessions will be organised with our exclusive recruitment partner, Glen Shepherd. Please get in touch via CV submission & arrange your pre-interview session NOW: Tel 07977 266309 / @
JOB REF: 4224GS....Read more...
Mechanical Precision Engineer
Location: Shropshire / Black Country / Midlands / Central
Package: Circa £40k + Vehicle + Career Advancement + Continuous Training
Hours: Monday – Friday / No nights or shift work
Join a leading Class A OEM specialising in designing, developing, and manufacturing world-class precision machine tools for the manufacturing sector. As technology advances rapidly, we have an exciting opportunity for a highly skilled Mechanical Precision Engineer to refurbish, rectify and fault-find for exceptionally complex, mechanical precision machine tools.
What We're Looking For:
Mechanical machinery & equipment fault finding and repair skills.
Proficiency in Precision Engineering with high tolerance & measurements in Microns.
Understanding of mechanical components and mechanical functions within machine tools.
Experience in mechanical refurbishment.
Proficiency handling specialist tools and equipment within precision and mechanical engineering.
Understanding ofelectronic controls and fitting processes alongside mechanical functionalities.
Knowledge of installing full turnkey lines, interconnecting several pieces of machinery to form a production line ensuring all safety measures and meeting industry standards & conformity.
Desired Skills:
Mechanical engineering qualification.
Experience of working within a precision environment.
Some understanding of electrical / 3 phase electrics & electronic controls would be useful.
Inquisitive nature combining a can do will fix mentality.
Here's the future vision….
Based at our new UK HQ centrally located, this role offers tremendous potential and serves as a springboard into higher positions within our international manufacturing business.
Ready to elevate your career? Apply today and join a team that's pushing the boundaries of precision engineering!
#MechanicalEngineer #Precisionengineering #PrecisionMachinery #JobOpportunity #Manufacturing #EngineeringJobs
Meet the employer:
Short 20 min bite sized meet the employer sessions will be organised with our exclusive recruitment partner, Glen Shepherd. Please get in touch via CV submission & arrange your pre-interview session NOW: Tel 07977 266309 / @
JOB REF: 4224GS....Read more...
An exciting opportunity has arisen for a Security Engineer to join a well-established provider of security solutions. This full-time, permanent role offers excellent benefits and a salary of OTE £32,000 - £40,000.
As a Security Engineer, you will be carrying out installations and commissioning of modern security systems across designated regions.
You will be responsible for:
* Installing a range of electronic security systems to high standards, including system upgrades and modifications
* Working with Intruder Alarms, CCTV, and Access Control systems
* Providing on-site technical expertise, ensuring specifications and client requirements are met.
* Reading and interpreting technical drawings and schematics
* Maintaining accurate documentation and submitting completed reports to the admin team
* Coordinating effectively with internal teams, including installation supervisors and planners
What we are looking for:
* Previously worked as a Security Engineer, Alarm Engineer, Access Control engineer, Security Systems Engineer, CCTV Engineer, Security Installation Engineer or in a similar role.
* At least 3 years' experience working in the electronic security sector
* Comprehensive understanding of NSI standards
* Understanding of alarm signalling devices such as Emizon, Dual-Com, and Webway
* Technical knowledge of both IP-based and analogue CCTV systems
* Familiarity with modern access control and intruder alarm technologies
* A full, clean UK driving licence is essential
What's on offer:
* Competitive salary
* Performance-related bonus of up to £2,000
* Company vehicle with private use option, fuel card, and paid travel time (after the first 30 minutes)
* 25 days holiday plus bank holidays
* Access to overtime at premium rates
* Life insurance cover
* Comprehensive private healthcare plan and employee assistance programme
* Recognition and referral incentives
* Pension scheme
* Employee benefits platform with discount savings worth up to £1,200 annually
* Financial wellbeing tools with early wage access
This is a fantastic opportunity for a Security Engineer to join a supportive and forward-thinking organisation.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
The successful candidate will support hazardous operations, testing firing sites. You will work closely with Lead Test Engineers to prepare and maintain test sites, handle propellants, conduct sampling and analysis, and perform various critical operational tasks.
Key Responsibilities
Ensure correct feedline pressures are set for testing procedures.
Assist Lead Test Engineers with site preparation and maintenance.
Handle and sample propellants, conduct analysis, and perform system checks.
Maintain and operate mechanical and steam vacuum systems.
Calibrate instrumentation and maintain steam boiler operations.
Collate and review test data for reporting and analysis.
Operate high-pressure gas and fluidic systems with expertise.
Utilize electrical and electronic measurement and testing equipment.
Prepare, install, remove, and decontaminate customer flight hardware, including test engine instrumentation.
Skills and Competencies
Proven experience as a Mechanical Fitter.
Strong understanding of high-pressure gas and fluidic systems.
Ability to read and interpret Piping and Instrumentation Diagrams.
Experience with mechanical systems, vacuum systems, and steam boiler maintenance.
Proficient in using measurement and testing equipment....Read more...
Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technologies.
Key Responsibilities
Install instrumentation on propulsion systems, including engines, batteries, and electric motors.
Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs.
Assist engineers with commissioning and preparing the device under test (DUT) for operation.
Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed.
Contribute to the development process through hardware adjustments and problem-solving.
Demonstrate strong knowledge of electronic control systems.
Maintain awareness and understanding of battery and electric motor technology.
Required Skills and Experience
BTEC Level 3 or equivalent apprenticeship in engineering is advantageous.
GCSEs in Mathematics, English, and Science (Grades 5-9).
At least 3 years of propulsion testing experience in a similar environment.
Proficient diagnostic skills, especially with engine ECU and battery BMS systems
....Read more...
Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technologies.
Key Responsibilities
Install instrumentation on propulsion systems, including engines, batteries, and electric motors.
Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs.
Assist engineers with commissioning and preparing the device under test (DUT) for operation.
Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed.
Contribute to the development process through hardware adjustments and problem-solving.
Demonstrate strong knowledge of electronic control systems.
Maintain awareness and understanding of battery and electric motor technology.
Required Skills and Experience
BTEC Level 3 or equivalent apprenticeship in engineering is advantageous.
GCSEs in Mathematics, English, and Science (Grades 5-9).
At least 3 years of propulsion testing experience in a similar environment.
Proficient diagnostic skills, especially with engine ECU and battery BMS systems....Read more...
The Assembly Technician will be responsible for assembling, integrating, and testing precision-engineered components for the aerospace industry. The role involves working in a cleanroom environment, handling fluidic components such as valves and thrusters, and using specialised testing equipment.
Key Responsibilities:
Precision assembly and testing of aerospace components
Leak detection and high-pressure gas testing
Cleaning and preparing components for assembly
Conducting electrical and gas flow tests
What We are Looking For:
Hands-on engineering or mechanical fitting experience (apprenticeship or industry experience preferred)
Attention to detail and a systematic approach to tasks
Problem-solving skills and the ability to work in a structured, safe manner
Willingness to learn and adapt to new techniques
IT skills and ability to use electronic testing systems
Cleanroom experience is a plus but not essential
What We Offer:
Competitive salary
Bonus potential
5 percent pension contribution match
Life assurance and enhanced sick pay
Employee Assistance Program
Career development opportunities....Read more...
The successful candidate will support hazardous operations, testing firing sites. You will work closely with Lead Test Engineers to prepare and maintain test sites, handle propellants, conduct sampling and analysis, and perform various critical operational tasks.
Key Responsibilities
Ensure correct feedline pressures are set for testing procedures.
Assist Lead Test Engineers with site preparation and maintenance.
Handle and sample propellants, conduct analysis, and perform system checks.
Maintain and operate mechanical and steam vacuum systems.
Calibrate instrumentation and maintain steam boiler operations.
Collate and review test data for reporting and analysis.
Operate high-pressure gas and fluidic systems with expertise.
Utilize electrical and electronic measurement and testing equipment.
Prepare, install, remove, and decontaminate customer flight hardware, including test engine instrumentation.
Skills and Competencies
Proven experience as a Mechanical Fitter.
Strong understanding of high-pressure gas and fluidic systems.
Ability to read and interpret Piping and Instrumentation Diagrams.
Experience with mechanical systems, vacuum systems, and steam boiler maintenance.
Proficient in using measurement and testing equipment....Read more...
Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technologies.
Key Responsibilities
Install instrumentation on propulsion systems, including engines, batteries, and electric motors.
Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs.
Assist engineers with commissioning and preparing the device under test (DUT) for operation.
Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed.
Contribute to the development process through hardware adjustments and problem-solving.
Demonstrate strong knowledge of electronic control systems.
Maintain awareness and understanding of battery and electric motor technology.
Required Skills and Experience
BTEC Level 3 or equivalent apprenticeship in engineering is advantageous.
GCSEs in Mathematics, English, and Science (Grades 5-9).
At least 3 years of propulsion testing experience in a similar environment.
Proficient diagnostic skills, especially with engine ECU and battery BMS systems
....Read more...
Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technologies.
Key Responsibilities
Install instrumentation on propulsion systems, including engines, batteries, and electric motors.
Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs.
Assist engineers with commissioning and preparing the device under test (DUT) for operation.
Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed.
Contribute to the development process through hardware adjustments and problem-solving.
Demonstrate strong knowledge of electronic control systems.
Maintain awareness and understanding of battery and electric motor technology.
Required Skills and Experience
BTEC Level 3 or equivalent apprenticeship in engineering is advantageous.
GCSEs in Mathematics, English, and Science (Grades 5-9).
At least 3 years of propulsion testing experience in a similar environment.
Proficient diagnostic skills, especially with engine ECU and battery BMS systems....Read more...
The Assembly Technician will be responsible for assembling, integrating, and testing precision-engineered components for the aerospace industry. The role involves working in a cleanroom environment, handling fluidic components such as valves and thrusters, and using specialised testing equipment.
Key Responsibilities:
Precision assembly and testing of aerospace components
Leak detection and high-pressure gas testing
Cleaning and preparing components for assembly
Conducting electrical and gas flow tests
What We are Looking For:
Hands-on engineering or mechanical fitting experience (apprenticeship or industry experience preferred)
Attention to detail and a systematic approach to tasks
Problem-solving skills and the ability to work in a structured, safe manner
Willingness to learn and adapt to new techniques
IT skills and ability to use electronic testing systems
Cleanroom experience is a plus but not essential
What We Offer:
Competitive salary
Bonus potential
5 percent pension contribution match
Life assurance and enhanced sick pay
Employee Assistance Program
Career development opportunities....Read more...
Senior Electrical Engineer (Contract)
Location: Weymouth, Dorset, UKContract: Initial 6 months, Outside IR35Rate: £57 per hour (dependent on experience)Start Date: Immediate
Role Overview
We are seeking a highly experienced Senior Electrical Engineer to join our Research and Development team. This role involves developing innovative solutions for printing systems, factory line processes, and associated modules. You will tackle complex engineering challenges using cutting-edge technologies, technical analysis, and creative problem-solving.
Key Responsibilities
Develop and implement new designs and systems based on evolving technologies.
Conduct technical risk assessments and recommend mitigation measures.
Prepare and review specifications, ensuring compliance with industry standards.
Collaborate with teams to identify project requirements and deliver technical solutions.
Manage quality, cost, and time balance for assigned tasks.
Actively contribute to continuous improvement by evaluating outcomes and incorporating feedback.
Essential Skills & Experience
Qualifications:
Master’s Degree in a technical discipline with mid-level experience or
Bachelor’s Degree with senior-level experience, or Chartered Engineer status with mid-level experience.
High-level understanding of electrical, electronic, electromechanical, and mechatronic systems.
Proven experience in the design and assembly of electrical/electronic components and associated cost management.
Technical Proficiency:
Expertise in CAD tools such as ePlan or Altium and EDM systems (e.g., Teamcenter PLM).
Strong understanding of BS EN 61082 standards and related industry benchmarks.
Skilled in measurement, control, and regulation systems, including sensors, actuators, wiring, safety, and circuit design.
Knowledge of EMC and ESD applications and testing.
Desirable Skills
Experience with motion control systems and motor tuning.
Knowledge of PCB layout and SAP systems.
Background in designing special-purpose machinery.
What We Value
Strong problem-solving capabilities and a proactive mindset.
Excellent communication skills to collaborate effectively across teams and stakeholders.
Commitment to quality, sustainability, and health & safety.
Apply Now: Take the next step in your career by joining a team that values innovation, excellence, and professional growth. Reach out to us for further details and to submit your application.....Read more...
Workshop Technicians
Salary: £23K-26K Dependent on experience + Benefits
8-5 Monday to Thursday, & Friday 8 - 4.30 pm, and every other Friday 12.30 pm Finish.
My client is looking for self-motivated individuals who are flexible, take pride in their work, and want to be part of a business with an exciting future. Full training will be given.
This is a great opportunity for someone looking to join a friendly company, who enjoys working with small devices, looking to learn and grow within a technical environment. This position has huge potential for the right person.
Basic duties will include:
- Repair and servicing of electronic devices, including bar code readers, PPS (point of sale) devices as well as monitors and computers, and chip and pin (payment) devices and:
- Managing spare parts usage using our IT database system
- Testing units to meet with quality control procedures
- Co-operation with logistics and production support departments
Candidate requirements:
- Broadly understood knowledge in the field of electronics, the basics of building computers and electronic devices
- Basic knowledge of computer science
- An additional advantage will be an education in electronics / electrotechnics and experience in electronics repairs and maintenance
Personal Skills
- Candidates must demonstrate an aptitude for working with small hand tools/soldering etc.
and have an eye for detail
- Must have the ability to work to deadlines and achieve high-quality standards
- Competent with working alone on computers, including using specialist manufacturer
calibration programs (training provided)
- Knowledge of taking apart and working with computers, mobiles or electrical devices.
My client offers the opportunity to:
- Work for an established group, with a stable market position
- Raising own professional qualifications
- Internal training (inside and outside of the UK)
- An international working environment
- Friendly atmosphere
- Basic Contract to include:
• 40 hours per week
• 20 days annual leave in addition to Bank Holidays
At KHR we take care to ensure that you are represented as well as possible so it is worth checking your CV for layout, spelling and grammar as well as making sure it is up to date before you submit. If you feel you need to highlight particular qualifications, skills or relevant experience with regards to a specific role then please add a cover letter or a preface page. This does not need to be formatted in the same manner. In addition, if your CV is heavy with graphics etc, please could you also submit a "clean" copy in Word. Thank you.
KH Recruitment Ltd is acting as an Employment Agency in relation to this vacancy. KHR - Recruitment Specialists is a trading name of KH Recruitment Ltd Keep in touch with us online for job alerts, industry updates and market...
....Read more...
My client, a distributor of Electronic Components, are looking for a Business Development Manager - Aerospace and Defence to strengthen their team and drive the business forward.
In your job as a Business Development Manager - Aerospace and Defence, you will drive their product range into their existing customer and prospect customer bases across the South of the UK.
To apply for the Business Development Manager - Aerospace and Defence you should have a blend of the following:
Strong experience selling into PRIME Defence companies
Experience developing existing accounts
Experience bringing in new business
This job is a great chance to join a growing company who can offer the opportunity for career progression and personal development.
To apply for the Business Development Manager - Aerospace and Defence job please send your CV and covering letter to Bwiles@redlinegroup.Com, or for more information contact Ben Wiles on 01582 878816 / 07471 181784.....Read more...
An exciting opportunity has arisen for a Production Engineer, to join an Electronics manufacturing business in Buckinghamshire.
The successful Production Engineer, based in Buckinghamshire, will report into the Production Engineering Manager.
Key Responsibilities:
Design work procedures and issue work instructions.
Review printed circuit board (PCB) designs from clients in the form Gerber and SMT pick-and-place files and convert them to production instructions.
Design and build test jigs for production. Build wiring harnesses for programming devices.
Trouble-shoot production issues.
Liaise with product designers when necessary.
The Production Engineer, based in Buckinghamshire, will have Production experience in electronics manufacture and an understanding of electronic circuits to component level. You will also have experience of GC-Powerplace or equivalent.
APPLY NOW for the Production Engineer, based in Buckinghamshire, by sending your CV and cover letter to LTemple@reldinegroup.Com or contact us on 01582878820.....Read more...
Holt Executive is Hiring Digital Electronics Engineer (C&DH) Holt Executive is partnering with a leading space technology company to find a Digital Electronics Engineer (Command & Data Handling) to join their team in Harwell, UK. This is an exciting opportunity to play a key role in the development of mission-critical spacecraft electronics, supporting innovative space missions that push technological boundaries.
About the Role: As a Digital Electronics Engineer (C&DH), you will be responsible for designing, developing, and testing electronic systems for spacecraft, covering the full lifecycle from early design to assembly, integration, and verification (AIV). The role involves working on complex spacecraft data handling architectures, interface design, and system testing, ensuring the smooth operation of mission-critical electronics.
This position offers the opportunity to shape the direction of C&DH engineering within a growing and dynamic team, contributing to space missions that require high-speed data processing, precision control, and fault-tolerant electronics.
Key Responsibilities:
- Develop and design Command & Data Handling (C&DH) subsystems for spacecraft.
- Define subsystem requirements, test plans, and verification processes.
- Manage data processing and power budgets for onboard electronics.
- Design and review C&DH architectures, ensuring compatibility with mission needs.
- Conduct FMECA (Failure Mode, Effects, and Criticality Analysis) and FDIR (Fault Detection, Isolation, and Recovery) processes.
- Collaborate with system engineers, ground segment teams, and operations teams to integrate and validate spacecraft systems.
- Plan, prepare, and execute electrical subsystem and system-level verification tests, including writing test scripts and supporting environmental testing.
- Work with suppliers and procurement teams to define specifications and evaluate C&DH equipment.
Essential Skills:
- Bachelors or Masters degree in Electrical Engineering or a related discipline.
- 2+ years of commercial experience in electronic and/or system design for satellite Command & Data Handling (C&DH) systems.
- Experience working with industry-standard spacecraft communication protocols such as CCSDS, I2C, RS422, SpaceWire, and CAN.
- Understanding of C&DH system operations, avionics interfaces, and mission electronics.
- Hands-on experience in developing and executing test plans for spacecraft avionics.
- Strong knowledge of systems engineering and requirements management throughout the project lifecycle.
Desirable Skills:
- Experience with FPGA design using Verilog/VHDL.
- Proficiency in Python for test scripting.
- Hands-on experience handling and testing flight hardware in a cleanroom environment.
- Knowledge of GNSS systems and time synchronization for satellites.
- Understanding of radiation tolerance analysis and space-grade electronics for Low Earth Orbit (LEO).
- Familiarity with space sustainability initiatives, such as active debris removal and in-orbit servicing.
Whats on Offer?
- Competitive salary and benefits package.
- Work with a highly skilled, international team on cutting-edge space electronics.
- Hybrid working and flexible schedule options.
- Private healthcare, life insurance, and relocation support.
- Access to state-of-the-art office and cleanroom facilities.
- Regular social events and professional development opportunities.
If you're passionate about digital electronics and spacecraft C&DH systems, apply today or contact Holt Executive to learn more!....Read more...
An exciting opportunity has arisen for a Test Development Engineer to join this global leader specialising in high-tech electronic technologies based in Portsmouth, Hampshire.
Due to continued growth they are seeking a Test Development Engineer to join their diverse engineering teams and be responsible for analysing customer requirements to develop Analogue, Digital and Mixed Signal Test Platforms, including hardware and software design.
Key skills experience for Test Development Engineer:
Degree qualified in Electronics Engineering or related discipline
Experience of developing Test solutions for Analogue and Mixed Signal components
Experience with Pascal, C++, C#, Visual basic hands-on programming
Credence D0, ASLx or COHU experience ideal
PCB Design – Altium, OrCad, EAGLE CAD
This is a unique chance to join a forward thinking company in the exciting technology market who can offer the opportunity of career progression and personal development.
To apply for Test Development Engineer, based in Portsmouth, please send your CV and covering letter to ltemple@redlinegroup,com, or for more information contact Lewis Temple on 01582878820.....Read more...
Are you a highly motivated Patent Paralegal? If so, we are working on behalf of a leading IP practice with capacity to welcome a skilled Patent Paralegal into their Bristol office.
With full support from the line managers, on offer is a diverse role assisting patent attorneys with all manner of their workload, direct client contact and delegation of work flow between fee earners, paralegals and CSA, to ensure that deadlines are met. As the first point of contact you will communicate clearly and confidently with clients ensuring that you are providing a seamless IP service. Internally, you will pragmatically supervise junior team members.
We would be delighted to hear from candidates who are able to work autonomously when required, with the ability to prioritise substantial volumes of information through efficient delegation, proficient in MS office, possess expeditious typing skills and have a willingness to learn in-house electronic filing, records and other IT platforms.
If you would like to discover more about this progressive and agile firm who consistently deliver an outstanding client service, then Tim Brown awaits your call on 0113 467 9798 or via tim.brown@saccomann.com....Read more...
