Electronic Engineering Graduate required to join a large multi-faceted Electrical Engineering Design team. You will be working on the research, design and development of IoT networked intelligent devices. Full training will be provided across embedded controllers, NXP arm cortex processors, microcontrollers and general hardware and software design.
You will have an Electronic or Electrical Engineering degree, exposure to any of the above technologies and ideally some practical knowledge of electrical design.....Read more...
The Redline Group is working in partnership with our Oxfordshire-based client to assist them in searching for a Contract Electrical Technician – RF on a 6–12 month contract.
This is a fully onsite role based in Oxfordshire, starting in October 2025.
You’ll be joining a world-class team as they embark on the largest project in their history, a £500 million upgrade of their flagship machine, with the project running until 2030. This is a rare opportunity to work with technology you simply won’t find anywhere else in the UK.
Key Skills Required – Contract Electrical Technician – RF – Oxfordshire:
Proven experience with LV Electrical Systems
Ability to interpret and work from detailed electrical drawings
Hands-on experience with RF coaxial cables and RF connector assembly
Knowledge of high-power RF transmission lines, including rigid coaxial and WR1800 waveguide systems
This contract will not accept candidates operating via a PSC, therefore you will be required to work via an Umbrella company.
For more information or to apply for the Contract Electrical Technician – RF opportunity in Oxfordshire, please contact Maddie Ramsden – Mramsden@Redlinegroup.Com / DDi: 01582 878815 / Mob: 07940 254185 quoting reference MMR1049.....Read more...
Electrical & Mechanical Shift Maintenance Engineer – Kensington, London - £50,000 (Basic) + £5,000 Shift Allowance (Total Package £55,000) We have a fantastic opportunity for a skilled Electrical & Mechanical Shift Maintenance Engineers to join a leading maintenance company in the heart of Kensington, London. This position involves working at a prestigious event space/building for a renowned property management company, ensuring the smooth running of high-profile estate. You will be responsible for carrying out Planned Preventative Maintenance (PPMs), reactive maintenance, statutory compliance, and general building maintenance tasks. Hours: Continental Shift Pattern:Days: 07:00 AM – 19:00 PMNights: 19:00 PM – 07:00 AMJobs Available:2 x Mechanical Shift Engineers2 x Electrical Shift EngineersKey Responsibilities:Perform Electrical and Mechanical PPMs and reactive maintenance tasks.Ensure all systems are in compliance with statutory requirements and operational standards.Carry out maintenance on key systems, including HVAC plant, fire alarms, emergency lighting, water treatment, air conditioning, and chillers.Work with three-phase and single-phase electrical systems, Building Management Systems (BMS), and electrical monitoring systems.Maintain pumps, motors, Variable Speed Drives, and other critical mechanical systems.Provide top-tier maintenance support within a high-profile corporate office environment.Collaborate with a small team to deliver exceptional service to the client.Requirements:Apprentice-trained and experienced in building services.City & Guilds Level 2 & 3 in Electrical or Mechanical (or equivalent).Must hold the 17th/18th Edition of the IET Wiring Regulations.DBS ClearanceClient-facing experience is preferred.Commercial building maintenance experience is a must.Familiarity with electrical and mechanical systems like FCUs (Fan Coil Units), AHUs (Air Handling Units), and chillers.Package & Benefits:Basic Salary: £50,000 + £5,000 Shift AllowanceTotal Package: £55,00022 Days Annual LeavePension and Healthcare benefits.Overtime opportunities for additional earnings.Access to internal and external training courses.Excellent career progression opportunities, with the potential to move into supervisory roles and beyond.How to Apply: If you're looking for an exciting opportunity to develop your skills and progress within a thriving organization, please send your CV to Charlie Long at CBW Staffing Solutions. Interviews can be arranged immediately for the right candidates.....Read more...
Electrical & Mechanical Shift Maintenance Engineer – Kensington, London - £50,000 (Basic) + £5,000 Shift Allowance (Total Package £55,000) We have a fantastic opportunity for a skilled Electrical & Mechanical Shift Maintenance Engineers to join a leading maintenance company in the heart of Kensington, London. This position involves working at a prestigious event space/building for a renowned property management company, ensuring the smooth running of high-profile estate. You will be responsible for carrying out Planned Preventative Maintenance (PPMs), reactive maintenance, statutory compliance, and general building maintenance tasks. Hours: Continental Shift Pattern:Days: 07:00 AM – 19:00 PMNights: 19:00 PM – 07:00 AMJobs Available:2 x Mechanical Shift Engineers2 x Electrical Shift EngineersKey Responsibilities:Perform Electrical and Mechanical PPMs and reactive maintenance tasks.Ensure all systems are in compliance with statutory requirements and operational standards.Carry out maintenance on key systems, including HVAC plant, fire alarms, emergency lighting, water treatment, air conditioning, and chillers.Work with three-phase and single-phase electrical systems, Building Management Systems (BMS), and electrical monitoring systems.Maintain pumps, motors, Variable Speed Drives, and other critical mechanical systems.Provide top-tier maintenance support within a high-profile corporate office environment.Collaborate with a small team to deliver exceptional service to the client.Requirements:Apprentice-trained and experienced in building services.City & Guilds Level 2 & 3 in Electrical or Mechanical (or equivalent).Must hold the 17th/18th Edition of the IET Wiring Regulations.DBS ClearanceClient-facing experience is preferred.Commercial building maintenance experience is a must.Familiarity with electrical and mechanical systems like FCUs (Fan Coil Units), AHUs (Air Handling Units), and chillers.Package & Benefits:Basic Salary: £50,000 + £5,000 Shift AllowanceTotal Package: £55,00022 Days Annual LeavePension and Healthcare benefits.Overtime opportunities for additional earnings.Access to internal and external training courses.Excellent career progression opportunities, with the potential to move into supervisory roles and beyond.How to Apply: If you're looking for an exciting opportunity to develop your skills and progress within a thriving organization, please send your CV to Charlie Long at CBW Staffing Solutions. Interviews can be arranged immediately for the right candidates.....Read more...
Low Voltage Switchgear Field Service Engineer required to retrofit, service, repair and maintain medium and low voltage Electrical Switchgear, Transformers and protection relays across the UK so travel is required.
Skills
Electrician or Electrical Technician maintenance or retrofit experience ideally through the apprentice route.
Low and medium voltage experience of Power Stations, Hospitals, Steel works, industrial or commercial properties.
Role
Electrical Service and Planned Preventative Maintenance PPM
Routine maintenance, full service legacy and routine inspections.
Upgrading and replacing obsolete protection relays, control relays and other switchgear.....Read more...
Low Voltage Switchgear Field Service Engineer required to retrofit, service, repair and maintain medium and low voltage Electrical Switchgear, Transformers and protection relays across the UK so travel is required.
Skills
Electrician or Electrical Technician maintenance or retrofit experience ideally through the apprentice route.
Low and medium voltage experience of Power Stations, Hospitals, Steel works, industrial or commercial properties.
Role
Electrical Service and Planned Preventative Maintenance PPM
Routine maintenance, full service legacy and routine inspections.
Upgrading and replacing obsolete protection relays, control relays and other switchgear.....Read more...
Low Voltage Switchgear Field Service Engineer required to retrofit, service, repair and maintain medium and low voltage Electrical Switchgear, Transformers and protection relays across the UK so travel is required.
Skills
Off shore commisioning experience ideal
Electrician or Electrical Technician maintenance or retrofit experience ideally through the apprentice route.
Low and medium voltage experience of Power Stations, Hospitals, Steel works, industrial or commercial properties.
Role
Electrical Service and Planned Preventative Maintenance PPM
Routine maintenance, full service legacy and routine inspections.
Upgrading and replacing obsolete protection relays, control relays and other switchgear.....Read more...
Low Voltage Switchgear Field Service Engineer required to retrofit, service, repair and maintain medium and low voltage Electrical Switchgear, Transformers and protection relays across the UK so travel is required.
Skills
Off shore commisioning experience ideal
Electrician or Electrical Technician maintenance or retrofit experience ideally through the apprentice route.
Low and medium voltage experience of Power Stations, Hospitals, Steel works, industrial or commercial properties.
Role
Electrical Service and Planned Preventative Maintenance PPM
Routine maintenance, full service legacy and routine inspections.
Upgrading and replacing obsolete protection relays, control relays and other switchgear.....Read more...
Low Voltage Switchgear Field Service Engineer required to retrofit, service, repair and maintain medium and low voltage Electrical Switchgear, Transformers and protection relays across the UK so travel is required.
Skills
Off shore commisioning experience ideal
Electrician or Electrical Technician maintenance or retrofit experience ideally through the apprentice route.
Low and medium voltage experience of Power Stations, Hospitals, Steel works, industrial or commercial properties.
Role
Electrical Service and Planned Preventative Maintenance PPM
Routine maintenance, full service legacy and routine inspections.
Upgrading and replacing obsolete protection relays, control relays and other switchgear.....Read more...
Low Voltage Switchgear Field Service Engineer required to retrofit, service, repair and maintain medium and low voltage Electrical Switchgear, Transformers and protection relays across the UK so travel is required.
Skills
Off shore commisioning experience ideal
Electrician or Electrical Technician maintenance or retrofit experience ideally through the apprentice route.
Low and medium voltage experience of Power Stations, Hospitals, Steel works, industrial or commercial properties.
Role
Electrical Service and Planned Preventative Maintenance PPM
Routine maintenance, full service legacy and routine inspections.
Upgrading and replacing obsolete protection relays, control relays and other switchgear.....Read more...
15% Pension scheme, 33 holidays, various healthcare benefit, on-site subsidised canteen & gym, and the opportunity to work on impressive projects & products are just a few of the perks that the Electrical Technician will enjoy whilst working with this impressive manufacturing business.This impressive organisation was recently awarded the Top Employer 2023 status. Since their establishment over 160 years ago, they have become a household name within a number of high-profile industries including Oil & Gas and Power Generation, and now employ over 15,000 people across 180 facilities world-wide. Because of heightened workload, this employer is actively searching for an Electrical Technician to join their team on a permanent basis.Their UK flagship facility is based in LEEDS, just a few miles from the M1 & M62 motorways, meaning that the successful Electrical Technician can easily commute from Wakefield, Bradford, Selby, Castleford, Pontefract, Huddersfield, Wetherby and Harrogate.Key Responsibilities of the Electrical Technician:
Working as part of a skilled team responsible for conducting safe testing of high pressure industrial rotating machinery
Working directly from schematics, wiring diagrams and drawings to accurately instal various types of sensors and instruments to monitor a vast range of parameters during the testing phase
For the Electrical Technician position, we are keen to hear from individuals who possess the following:
Formal qualifications within a relevant discipline (apprenticeship, NVQ/BTEC/City & Guilds Level 3, HNC, HND etc.)
Previous experience working within an industrial or manufacturing environment
The ability to read, interpret and work directly from schematics & drawings
Working Hours of the Electrical Technician: 37 Per week spread across a day shift pattern:
Monday to Thursday - 07:00 to 15:30
Friday – 07:00 to 12:30
In return, the Electrical Technician will receive:
Annual Salary: £37,000.01 (£19.23 per hour)
Holiday Entitlement: 33 Days including public holidays
Annual Bonus up to £1,700.00 per annum – subject to company performance
Pension Scheme: 15% Combined Contribution (9% Employer / 6% Employee)
Access to the onsite canteen (subsidised) and gym
Opportunity to work frequent overtime, paid at 150%
Free onsite car parking
To apply for the Electrical Technician position, please click “Apply Now” and attach a copy of your CV. Alternatively, please contact Callum Good at E3 Recruitment for more information....Read more...
Our client is now seeking to appoint a skilled Controls and Automation Engineer for their manufacturing facility at Walbottle, Newcastle.This Controls and Automation Engineer vacancy is offering a salary of £51,000 working Monday to Friday, with a PLC listed and market-leading manufacturing group.This role requires someone who has strong knowledge and experience of Electrical Controls, Automation and PLC systems, as well as improvement projects and production reliability support experience, to join the team,The working culture is friendly, and one that encourages the sharing of best practices, whilst providing a platform for continuous learning and development.What’s In It for you as Controls and Automation Engineer:
Salary circa: £51,000 per annum
Working days Monday to Friday
Extensive training and personal development opportunities
Position Overview of Controls and Automation Engineer:The role will be working as part of the Maintenance Team providing ‘Hands-on’ Electrical & PLC Technical support to both Production and other internal functions throughout the Factory. PLC fault finding and modifications are vital skills to have for the role.You will be solely working with Controls and Electrical installations, fault finding, and repair of PLC controlled machinery, within a manufacturing environment.You will need strong skills and experience with breakdowns, fault finding, and changing of PLC parameters specifically. Experience of installing servo drives and projects, capex improvements, HMI, and profibus is all required. Providing plant-wide electrical maintenance service, departmental support and repairs on a wide range of machinery such as conveyor-based systems, hydraulic presses, moulding machines and packaging machinery, ensuring that all production targets are maintained.Within the position as an Controls and Automation Engineer, you will have the opportunity to be involved with a wide of range of electrical maintenance operations and improvements projects, which will be supported with a wide range of training opportunities, including accredited training programs.Experience and Qualifications Required Controls and Automation Engineer: - Recognised Electrical Engineering Apprenticeship & Qualification or equivalent UK level 3 qualification – NVQ, City and Guilds AND BTEC 3 or HNC/HND in Electrical Engineering etc - PLC Fault finding experience is essential - You will need strong skills and experience with breakdowns, fault finding, and changing of PLC parameters specifically. - Experience of installing servo drives and projects, capex improvements, HMI, and profibus is all required! - The ability to work within a fast-paced manufacturing environment undertaking PPM and TPM activities - High degree of Health & Safety awareness - Ability to fault find, repair and provide solutions to electrical machinery problems.PLEASE APPLY NOW....Read more...
As an MET Technician, you will play a crucial role in the repair and restoration of vehicles, focusing on mechanical, electrical, and trim components. If you have a strong background in automotive repair, exceptional technical skills, and a keen eye for detail, we invite you to apply for this exciting opportunity.
Key Responsibilities:
- Perform thorough diagnostic assessments to identify mechanical, electrical, and trim issues in vehicles.
- Repair or replace damaged mechanical components, such as engines, transmissions, suspension systems, and exhaust systems.
- Diagnose and rectify electrical faults, including wiring, circuits, and electrical components, using diagnostic tools and equipment.
- Repair or replace damaged trim components, including upholstery, dashboards, door panels, and interior/exterior trims.
- Perform precise and efficient mechanical adjustments, alignments, and calibrations as necessary.
- Utilize appropriate tools, equipment, and techniques to disassemble and reassemble vehicle parts, ensuring proper fit and function.
- Follow manufacturer specifications and repair procedures to maintain the highest quality standards.
- Collaborate with other team members, including painters and preppers, to ensure seamless workflow and timely completion of projects.
- Maintain accurate records of repairs, parts used, and time spent on each job.
- Adhere to established safety protocols and maintain a clean and organized work environment.
- Stay updated on industry advancements and participate in training programs to enhance technical skills.
Requirements:
- Proven experience as an MET Technician in an automotive repair or collision center.
- Strong knowledge and expertise in diagnosing and repairing mechanical, electrical, and trim components.
- Proficiency in using diagnostic tools, scanners, and other equipment for accurate fault identification.
- Excellent mechanical skills, including the ability to disassemble, repair, and reassemble vehicle parts with precision.
- Familiarity with vehicle electrical systems, including wiring diagrams and electrical troubleshooting techniques.
- Experience in repairing or replacing upholstery, trims, and other interior/exterior components.
- Understanding of manufacturer repair procedures and specifications.
- Strong attention to detail and the ability to work meticulously to achieve high-quality repairs.
- Effective communication skills and the ability to work collaboratively in a team environment.
- Flexibility to adapt to changing priorities and meet deadlines.
- High school diploma or equivalent; vocational training or certification in automotive repair is preferred.
- Valid driver's license and clean driving record.....Read more...
Electrical EstimatorLondon£50,000-£55,000 + Family Feel + Hybrid + Flexibility and Autonomy + Package + Immediate Start
Are you an Electrical Estimator wanting to join a growing company where you can be a part of a great environment? Join a well-established and trusted company delivering a full range of electrical services across the commercial and residential sectors. This role is great for anyone who is looking for a long-term stable role in a company that values their input and expertise.
This company specialises in solutions for projects for small and large players. This is an excellent opportunity for an Electrical Estimator to join a company that offers the chance to work on impactful, rewarding projects and to have full flexibility and autonomy in their role.Your Role As An Electrical Estimator Will Include:
Preparing tender submissions for projects
Thorough knowledge of construction / refurb in their sectors
Ensure accurate risk assessments
The Successful Quantity Surveyor Will Have:
Background as an Electrical Estimator or similar
Experience with commercial fit out projects
Full UK Driving Licence
Live commutable to London
Please apply or contact Georgia for immediate consideration on 07458163040.Keywords: Cost Estimator, Cost Consultant, Estimator, Contracts Surveyor, construction, commercial, residential, london, m25This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.Please visit our website to view other positions we are currently handling.Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
An opportunity has arisen for a Commissioning Engineer with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Water Commissioning Engineer, you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, pipework, b....Read more...
An opportunity has arisen for a Water Treatment Engineer with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Water Treatment Engineer, you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, pipework, boo....Read more...
An opportunity has arisen for a Water Treatment Engineer with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Water Treatment Engineer, you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, pipework, boo....Read more...
An opportunity has arisen for a Water Treatment Engineer with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Water Treatment Engineer, you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, pipework, boo....Read more...
An opportunity has arisen for a Service Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Service Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filter....Read more...
An opportunity has arisen for a Service Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Service Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filter....Read more...
An opportunity has arisen for a Service Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Service Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filter....Read more...
An opportunity has arisen for a Field Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Field Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, p....Read more...
An opportunity has arisen for a Field Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Field Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, p....Read more...
An opportunity has arisen for a Field Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Field Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, p....Read more...
An opportunity has arisen for a Water Treatment Engineer with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Water Treatment Engineer, you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, pipework, boo....Read more...
