Software Engineer required to work on C# and C++ Front ends that drive measurement and control embedded firmware. You will have a strong BSc, MSc, PhD or equivalent in Science or Engineering with low level software development.
Key Skills
C and Assembly languages with some C# or C++.
Hardware & software tools: emulator, simulator, modeling, scopes, logics analyzer, etc.
Microprocessor and DSP based hardware design, ability to read and understand schematics and manufacturer datasheets of components.
Peripherals and serial communications programming.
DSP algorithms and implementation.
Real Time Operating System, Matlab, Object Oriented Design and Embedded C++.
Agile and iterative development
Role Responsibilities
Design and implement embedded software for measurement and control systems incorporating multiple processors using Real Time Operating Systems.
Design of high speed, hard Real Time data acquisition and logging systems.
Testing and debugging hardware or software issues.
Implementation of DSP algorithms. ....Read more...
The Embedded Software Engineer designs and implements measurement and control embedded firmware. You will have a strong BSc, MSc, PhD or equivalent in Science or Engineering with low level software development.
Key Skills
C and Assembly languages ideally with some C++.
Hardware and software tools including emulator, simulator, modeling, scopes, logics analyzer, etc.
Microprocessor and DSP based hardware design, ability to read and understand schematics and manufacturer datasheets of components. Peripherals and serial communications programming.
DSP algorithms and implementation.
Real Time Operating System, Matlab, Object Oriented Design and Embedded C++.
Agile and iterative development
Role Responsibilities
Design and implement embedded software for measurement and control systems incorporating multiple processors using Real Time Operating Systems.
Design of high speed, hard Real Time data acquisition & logging systems.
Testing and debugging hardware or software issues.
Implementation of DSP algorithms. ....Read more...
Software Engineer required to work on C# and C++ Front ends that drive measurement and control embedded firmware. You will have a strong BSc, MSc, PhD or equivalent in Science or Engineering with low level software development.
Key Skills
C and Assembly languages with some C# or C++.
Hardware & software tools: emulator, simulator, modeling, scopes, logics analyzer, etc.
Microprocessor and DSP based hardware design, ability to read and understand schematics and manufacturer datasheets of components.
Peripherals and serial communications programming.
DSP algorithms and implementation.
Real Time Operating System, Matlab, Object Oriented Design and Embedded C++.
Agile and iterative development
Role Responsibilities
Design and implement embedded software for measurement and control systems incorporating multiple processors using Real Time Operating Systems.
Design of high speed, hard Real Time data acquisition and logging systems.
Testing and debugging hardware or software issues.
Implementation of DSP algorithms. ....Read more...
The Embedded Software Engineer designs and implements measurement and control embedded firmware. You will have a strong BSc, MSc, PhD or equivalent in Science or Engineering with low level software development.
Key Skills
C and Assembly languages ideally with some C++.
Hardware and software tools including emulator, simulator, modeling, scopes, logics analyzer, etc.
Microprocessor and DSP based hardware design, ability to read and understand schematics and manufacturer datasheets of components. Peripherals and serial communications programming.
DSP algorithms and implementation.
Real Time Operating System, Matlab, Object Oriented Design and Embedded C++.
Agile and iterative development
Role Responsibilities
Design and implement embedded software for measurement and control systems incorporating multiple processors using Real Time Operating Systems.
Design of high speed, hard Real Time data acquisition & logging systems.
Testing and debugging hardware or software issues.
Implementation of DSP algorithms. ....Read more...
Mechanical Design Engineer
Located in Essex
up to £50k DOE + Benefits
Are you an experienced Mechanical Design Engineer looking for a new challenge? My Client is looking for someone to join their existing team to work on Design projects as part of a team and individually.
The design role will cover jobs from quick modifications to large scale Design Projects as well as R&D projects including creating all working drawings, assembly sketches and bills of materials.
On occasion you will be required to attend customer sites to partake in loading trials to evaluate designs. This role will suit a highly motivated person who has a broad skill set and has excellent and effective communication skills.
The Role:
- Validation of Design and specification
- Checking and approving of component and assembly drawings
- Set up manufacturing bills of materials and parts lists
- Create and issue engineering detail and assembly drawings for production release.
- Technical reporting and tolerance analysis
Minimum Skills / Experience Required:
- Degree/equivalent qualification or HNC and proven experience in Mechanical Engineering Design.
- Have current experience and the ability to design in Autocad 2D and Autodesk Inventor 3D format
- Experienced in standard methods of steel component fabrications and good engineering practice and a sound knowledge of welded fabrications
- Ability to calculate stresses and approve designs for manufacture (first principals is basic requirements)
- A good understanding of hydraulics, electrics, pneumatic systems and their installations.
- Be familiar with current C & U regulations and EU directives (Not essential)
About Precision People
Precision People is a leading recruitment agency that specializes in sourcing top talent for Engineering, Technical, Sales and Senior Management roles across a wide range of industries. With a focus on precision and quality, their team of expert recruiters works tirelessly to match the best candidates with the right employers, ensuring that both parties benefit from a successful partnership.
Precision People has the expertise and resources to help you find the perfect role. With a deep understanding of the industry and a commitment to excellence, they have built a reputation for delivering exceptional results and exceeding their candidates expectations.
Interested?
To apply for the Field Service Technician position, here are your two options:
1. "This is the job for me! When can I start?" - Call now and lets talk through your experience. Ask for Jon Webster on 0116 254 5411 between 8.30am - 5.30pm.
2. "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know.....Read more...
An opportunity has arisen for aFF&E Designer with 4 years post graduate experience to join a well-established interior design company. This full-time role offers excellent benefits and a salary of £40,000.
As a FF&E Designer, you will oversee FF&E projects from concept to completion, focusing on design, selection, pricing, procurement, and coordination.
You will be responsible for:
* Managing all stages of the FF&E process, including budgeting, scheduling, sourcing, and procurement.
* Styling and dressing show flats and amenity spaces, supporting professional photography.
* Managing the FF&E library and sample area, ensuring it remains organised and up-to-date.
* Laise with clients to understand their design vision, requirements, and budgets.
* Presenting concepts through sketches, mood boards, renders, and 3D visualisations.
* Selecting appropriate materials and finishes that complement the design vision.
* Maintaining detailed project schedules, including specifications, finishes, and pricing.
* Collaborating with architects, contractors, and suppliers to ensure timely project delivery.
What we are looking for:
* Previously worked as a FF&E Designer, Interior Designer, Fixtures Designer, Design Consultant, Design Coordinator, Furniture Designer, FF&E or in a similar role.
* At least 4 years post graduate experience within the residential or hospitality sectors.
* A recognised diploma or degree in Interior Design, Interior Architecture, Architecture, or related fields.
* Passion for FF&E design with strong knowledge of suppliers, products, and specialist finishes.
* Skilled in AutoCAD, SketchUp, Revit, Adobe Creative Suite, and MS Office.
* Strong understanding of materials, fabrics and finishes.
* Right to work in the UK.
Whats on offer:
* Competitive Salary
* Opportunities for Professional Development
* Exposure to Diverse and Exciting Projects
* Collaborative and Supportive Working Environment
Apply now for this exceptional FF&E Designer opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources are an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Are you looking for a job opportunity with a versatile company who have some extremely exciting products based in Loughborough?
A Senior Electronics Engineer is required to join my client who is a multi-national business and a market leader in their field. With a high investment in research and development, leading brand and low staff turnover, my client are looking to recruit a Senior Electronics Engineer to join their R&D department based in Loughborough.
The Senior Electronics Engineer Job will be taking a role in development and will follow through the entire development cycle.
Requirements for the Senior Electronics Engineer Job:
Provable experience in electronics hardware design including analysis, simulation, schematic capture and PCB layout
Low level power supply design experience using simulation
Design experience of schematic capture and layout of complex PCBs
Design experience with complex microprocessor or DSP devices
The responsibilities for this Senior Electronics Engineer Job are;
Design complex high-speed digital and analogue circuit boards
Schematic capture and PCB layout
Develop PCBA requirements in collaboration with other engineering disciplines
Perform design verification testing and system integration testing
This is a fantastic job opportunity to join a well-established, highly profitable company in Loughborough who invest heavily in R&D.
APPLY NOW or if you would like further information on the Senior Electronics Engineer job opportunity, please send an up to date CV Rwilcocks@RedlineGroup.Com or call Ricky Wilcocks on 01582 878810 or 0791788834. Otherwise, we always welcome the opportunity to discuss other engineering jobs.....Read more...
A unique opportunity has arisen for a Senior Mechanical Design Engineer to join the world leading Product Design Consultancy based in Warwickshire.
Working with customers across a variety of industries their globally operating development teams have helped to create some of the market-leading products within the medical, scientific, consumer and transport markets.
Due to continued growth, they are seeking a Senior Mechanical Design Engineer to be based from their Warwickshire campus where you will be instrumental in the full concept product development process of a range of complex technology products. Working closely with customers you will be significant in the development of new designs, evaluation of new technologies and guidance of projects across multiple disciplines. The role will suit a creative candidate with good problem-solving skills, and someone that is able to generate innovative solutions to design problems.
Key skills and experience for Senior Mechanical Design Engineer:
BENG or CENG qualified with a 1st or a 2:1
Experience of product development from concept to volume manufacturing
Experience of 3D CAD packages
Ideally worked within a relevant industry i.e. Medical, Automotive, FMCG, Industrial, Consumer electronics
Excellent verbal and written communication skills
This is a great opportunity to work with a global recognised company who work with some of the world’s leading technology based organisations. A business that offers their employees the freedom to be creative, work across a variety of industries and be able to create career development and personal growth.
To apply for Senior Mechanical Design Engineer based in Warwickshire, please send your cv to ntyler@redlinegroup.Com, or for more information contact Natalie Tyler on 01582 878808 or 07751240250.....Read more...
Position: EC&I Engineer (Subsea Equipment)
Job ID: 264/24
Location: Newcastle
Rate/Salary: £45,000 to £60,000 DOE
Type: Permanent
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Shipping & Energy and Aerospace sectors. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
The below job description will outline this position of: EC&I Engineer (Subsea Equipment)
Typically, this person will be responsible for designing and developing offshore and subsea equipment, participating in every phase of the project life cycle. Their involvement spans from understanding client requirements through design, development, installation, testing, customer acceptance, documentation, training, and occasionally providing post-sales support. Additionally, they offer support to other business functions, including Sales, Project Management, Procurement, Production, Commissioning, and Documentation.
HSB Technical’s client is a very established and well-regarded business entity.
Duties and responsibilities of the EC&I Engineer:
Design of offshore and subsea equipment
Design of distributed control systems (PLC, SCADA)
Design of network and communications systems including RS485, MODBUS and Ethernet protocols
Design of low voltage and extra low voltage control circuits
Measurement systems & instrumentation
Selection and integration of subsea surveillance, vision and lighting systems
Using CAD to design and produce top level system diagrams, interconnecting wiring drawings, and detailed electrical, control & instrumentation schematics
Qualifications and requirement for the EC&I Engineer:
Degree in Electrical Engineering or similar
Practical experience/background in the subsea industry
Experience of machine control systems / automation
Autodesk AutoCAD
Autodesk Inventor
This vacancy is being advertised by HSB Technical who have been appointed to act as the recruitment consultancy for this role.....Read more...
A contractor specialising in Structural Steel & Architectural Metalwork in Kent is seeking an experienced Tekla Draughtsperson to join their team. Key Responsibilities
Design Detailing: Create detailed drawings and specifications for architectural metalwork using Tekla software.
Team Collaboration: Work closely with the design manager and other team members to ensure project requirements are met.
Site Visits: Conduct occasional site visits to gather information and ensure design accuracy.
Quality Control: Maintain high standards in design output, ensuring compliance with industry regulations and safety protocols.
Communication: Effectively communicate with both technical and non-technical personnel regarding project details and requirements.
Qualifications
Experience: Proven experience in detailing Structural Steel & Architectural Metalwork,specifically using Tekla software.
Regulatory Awareness: Familiarity with industry standards and regulations relevant to steel detailing.
Technical Skills: Strong proficiency in Tekla and related design tools; ability to produce accurate and detailed drawings.
Team Player: Excellent collaboration skills, with the ability to work effectively within a team environment.
Problem-Solving: Strong analytical abilities and a proactive approach to resolving design issues.
Additional Information
Start Date: In 4 weeks or sooner
Work Hours: 7:30 AM to 5:00 PM
Salary: £45,000 - £50,000 depending on experience
Remote Work: No working from home
Interested applicants are invited to apply by sending their most up-to-date CV.....Read more...
Junior Electrical Design Engineer
Aberdeen
£28,000 - £35,000 Basic + Bonuses (OTE 40k Plus) + Holidays + Progression + Training & Development + Package + MORE
Ambitious Junior Electrical Design Engineer looking to develop your skills in a company that specialises in power distribution solutions? This is a fantastic opportunity to join an industry-leading organisation where you’ll receive expert training, gain hands-on experience, and work on innovative projects that shape the future of electrical engineering.
As a Junior Electrical Design Engineer you will work alongside experienced engineers to develop electrical schematics, circuit diagrams, and layout designs for custom-built switchgear systems This well-established business operates at the forefront of the power and energy sector, delivering tailored engineering solutions to industries such as utilities, manufacturing, and critical infrastructure..
If you want to join a company who offers career progression and ongoing training to enhance your skills apply NOW and secure your place in a new exciting role!
Your role as Junior Electrical Design Engineer will include:
* Liaising with new and existing clients * Working on projects for on shore and off shore clients * Training on technical drawings The successful Junior Electrical Design Engineer will have:
* Some experience with auto CAD 2D or 3D * UK driving license * Willing to travel
For immediate consideration please call Matthew on 07458163042 or click to apply
Keywords: Junior electrical engineer, Junior engineer, Electrical design engineer, Engineer, CAD software, PLC programming, Electrical schematics,Electrical engineer, field engineer, field service, mechanical, electrical, calibration, garage equipment, mechanic, mechanical engineer,mechanical technician, Hydraulics, Off shore, Oil and Gas, Scotland, Aberdeen, Perth, Dundee, Banff, Alford, Inverurie, Huntly ....Read more...
BUSINESS DEVELOPMENT EXECUTIVE – INTERIOR DESIGN
LONDON – HYBRID
UPTO £40,000 + GREAT BENEFITS
THE OPPORTUNITY:
Get Recruited are recruiting on behalf of a luxury lighting company. This is an exciting opportunity for someone with a passion for design, a strong sales background and the drive to contribute to the success of a dynamic and innovative company.
This is a great opportunity for someone from a interior design, creative, luxury, sales, sales executive, business development manager, bdr, sales manager, junior business development or similar role
THE ROLE:
Identify and pursue new business opportunities to drive revenue.
Build relationships with key industry professionals, including designers, architects, and developers.
Conduct meetings, presentations, and showroom visits.
Attend industry events, trade fairs and networking opportunities to represent the brand and connect with potential clients.
Stay informed on industry trends and customer needs to identify new opportunities for growth.
Oversee day to day sales activities, including managing orders, invoicing, project scheduling and customer communications.
THE PERSON:
A track record in business development or sales within interior design or luxury focused environment.
Excellent interpersonal and communication skills to effectively build relationships with clients and stakeholders.
Ability to identify opportunities and develop targeted sales strategies.
Previous experience in the luxury market or design sector.
Driven sales professional with a passion for design and business development.
Get Recruited is acting as an Employment Agency in relation to this vacancy.....Read more...
An opportunity has arisen for aInterior Designer with experience in F&B and hospitality sectors to join a well-established consultancy delivering market insight, design, cost, and construction solutions for global clients. This full-time role offers excellent benefits and a competitive salary.
As an Interior Designer, you will be supporting senior designers and contributing to the entire design process from concept to delivery.
You will be responsible for:
? Preparing mood boards, sample boards, and visual presentation material for clients
? Developing 2D and 3D visuals and technical drawings, including joinery details and elevations
? Sourcing FF&E and managing specifications in line with project needs
? Assisting in mentoring junior team members and promoting a collaborative studio culture
? Managing project timelines and liaising with clients and contractors to ensure smooth execution
What we are looking for:
? Previously worked as an Interior Designer, Interior Design Manager, Project Designer, Interior Architect, Architectural Designer or in a similar role..
? At least 5 years' experience in interior design with a focus on F&B and hospitality sectors.
? A portfolio showcasing luxury design projects within the hospitality sector.
? Strong knowledge of materials, finishes, and FF&E sourcing.
? Skilled in using AutoCAD, Adobe Creative Suite (InDesign, Photoshop), and hand sketching.
? Familiarity with UK Building Regulations and an understanding of construction detailing
? A degree in interior design or interior architecture.
? Right to work in the UK.
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For mor....Read more...
The Redline group have an exciting new opportunity for an Electrical Design Engineer, based in Loughborough, to join their team. In this role you will be responsible for leading the design and documentation of electrical wiring harnesses and other electrical work packages, using Solidworks Electrical to create electrical schematics, 3D models and manufacturing documents for wiring harnesses and cable assemblies.
Main responsibilities for the Electrical Design Engineer, based in Loughborough are:
- Generating electrical drawings and panel layouts with supporting electrical documentation (Bill of Materials, Component Lists, Cable Schedules, Terminal Rail Layouts etc)
- Ensure all electrical drawings are updated promptly throughout the lifecycle of the project and shared with all relevant departments
- Maintain a database of preferred electrical devices to ensure consistency in functional hardware from project to project
Key skills required for this Electrical Design Engineer, based in Loughborough are:
- Electrical Engineering Qualification
- In-depth knowledge of Solidworks Electrical or similar CAD package
- Experience with schematic capture and harness design
To apply for this role please email a copy of your CV to Ricky Wilcocks – Rwilcocks@redlinegroup.Com, or for more information, please call Ricky Wilcocks on 01582 878810 / 079317 88834. ....Read more...
Avionic System Design Engineer required to work as part of a team across aircraft, aviation and satellite connectivity.
Requirements
Avionics systems and SATCOM technology experience of Iridium, Inmarsat, Viasat, Starlink or similar.
DOORS, JAMA or similar systems engineering tool knowledge.
BEng in Electronics Engineering or related ideally with postgrad qualifications.
UAV regulations, safety standards ARP4754, ARP4761, DO178 or DO254 desirable.
Role
Avionic system design, development, and implementation.
SATCOM system integration of Iridium, Inmarsat, Viasat, Starlink.
Design review including testing, validation and regulatory compliance.....Read more...
Avionic System Design Engineer required to work as part of a team across aircraft, aviation and satellite connectivity.
Requirements
Avionics systems and SATCOM technology experience of Iridium, Inmarsat, Viasat, Starlink or similar.
DOORS, JAMA or similar systems engineering tool knowledge.
BEng in Electronics Engineering or related ideally with postgrad qualifications.
UAV regulations, safety standards ARP4754, ARP4761, DO178 or DO254 desirable.
Role
Avionic system design, development, and implementation.
SATCOM system integration of Iridium, Inmarsat, Viasat, Starlink.
Design review including testing, validation and regulatory compliance.....Read more...
Civil Design Engineer
Sevenoaks, Kent
£37,000 - £42,000 + Chartership Progression + Technical Development + Unique Environment + Training + Wide range of Projects + Bonus Scheme + Healthcare Plan + Cycle to Work Scheme + Pension + Buy Back Holiday Scheme + Starting Apr 2025
This market-leading company is looking for a Civil Design Engineer to progress within their growing business and work on a broad range of varied projects. This is a great opportunity to work towards Chartership in a strong team with lots of training and support. As you develop your career, they plan to build a team around you, where you can lead and develop the next generation.
This nationwide company is looking for a Civil Design Engineer to work from their office in Kent. This company will allow you to progress up the ranks to director, and become a specialist within the industry and work for high-end clientele. The range of projects on a day to day basis: from Highways, water and rail, you'll enjoy variety and working within a great team of specialists.
Your Role as a Civil Design Engineer will include:
* Continuous Training & Development, so you can reach managerial level* Report writing (FRA, drainage strategy, specification, etc.)* Preparation of highway and drainage design with a knowledge of UK design standards* Attend client meetings* Train and help develop graduate engineers
The Successful Civil Design Engineer will need:* Bachelor’s or Master’s Degree in Civil Engineering* Working towards Chartership* Knowledge in the use of Civil 3D, MicroDrainage, AutoCAD* Commutable to Sevenoaks* Full right to work within the UK
Please apply or contact Dave Blissett for immediate consideration!
Keywords: Civil Design Engineer, Civil Engineer, Highways Engineer, Drainage Engineer, Structural Engineer, Project Engineer, Sevenoaks, Tonbridge, Maidstone, Kent, London, Drainage, Autocad, Autotrack, Civils 3D, PDS
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
....Read more...
Flexible working hours, company pension contributions of up to 8% and an annual leave entitlement of 25 days plus Bank Holidays are just a few of the perks that the Senior Design Engineer will enjoy whilst working for a Global Engineering and Manufacturing leader, with over 20 worldwide locations employing 1000 + staff. This employer is recognised globally for quality and innovative deliverables.The successful Senior Design Engineer will be easily able to commute to HUDDERSFIELD from surrounding towns & cities, including Leeds, Dewsbury, Halifax, Wakefield and Brighouse.Key Responsibilities of the Senior Design Engineer will include:
Develop new designs or re-engineer existing designs for new applications using AutoCAD 2D & 3D to an expert level, including Solid Edge.
Create detailed component and assembly drawings
Create and maintain accurate documentation including BOM’s, Proposals, Manuals and Maintenance instructions for designs.
Interpret customer specifications and design standards
Participate in Design/Process Failure Mode and Effect Analysis (DFMEA/PFMEA) activities
Reporting to the Technical Authority, Engineering Resource Manager and Engineering Director
For the Senior Design Engineer role, we are keen to receive CV’s from candidates who possess:
Experience as a Senior Design Engineer or similar within an Engineering environment
Demonstrable understanding of material selection,
Strong understanding of industry standards such as ISO, AGMA, DIN and FKM to name a few.
Bachelors Degree in Mechanical Engineering and or CEng
Experience using SAP MRP
Salary & Benefits:
up to £65,000 depending on experience
Flexible working hours
Monday to Friday
37.5 hours per week
25 Days annual leave + Bank holidays
Company pension contributions of up to 8%
Please be aware that many roles working for our client will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.You must meet Right to Work in the UK criteria and achieve the required security and clearance requirements to undertake this role.To apply for the Senior Design Engineer role, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Alex Feather at E3 Recruitment for more information. ....Read more...
Climate17 is working with a leader in high-voltage design, installation, and commissioning services. They are driving the UK's future energy landscape with innovative projects, from 11kV to 400kV. As their operations grow, they are looking for a skilled Senior Electrical Engineer to join their multi-disciplinary Engineering team. Role Reporting to the Engineering Manager, you’ll serve as a design authority, collaborate on substation designs, mentor colleagues, and directly contribute to the energy transition. ResponsibilitiesWorking as a design authority to shape and approve design solutions and conducting design reviews, ensuring compliance with customer requirements and regulations.Driving technical excellence with an expanding team of electrical engineers.Producing detailed Substation Layout Designs, defining Primary Plant requirements, and ensuring electrical clearances.Collaborating with various teams to coordinate seamless, multi-disciplinary designs.Performing equipment calculations and liaising with our supply-chain to meet project specifications.Designing and routing HV Cables, calculating ratings, and developing effective earthing systems.Resolving on-site installation challenges through technical guidance.Supporting tenders by anticipating design challenges, optimising budgets, and aligning with project timelines.Building strong relationships with clients, contractors, and stakeholders through clear communication and technical expertise. RequirementsIndicatively, 5 years’ experience in Substation Design, with a strong foundation in National Grid standards and BESS projects.Education: Degree or equivalent qualification in Electrical Engineering; IEng or CEng status is desirable.Skills: In-depth knowledge of UK specifications, single-line diagrams, and the design of high-voltage systems. Competence in performing electro-mechanical calculations is a plus.Collaboration: A team player with excellent interpersonal skills to coach a developing team and to foster collaboration across departments. About Us Climate17 is a purpose-led, international Renewable Energy & Sustainability recruitment firm. We provide specialist talent acquisition services to organisations seeking to reduce their environmental footprint, as well as those working towards the decarbonisation of the energy sector. Inclusive Application Process Climate17 is committed to creating a diverse, inclusive and equitable workplace. We believe there is no solution to climate change without people. We aim to increase diversity across all areas and as such, we are committed to partnering with clients and candidates to create an inclusive and sustainable regenerative world. We welcome applications from all qualified candidates, regardless of their ethnicity, race, gender, religious beliefs, sexual orientation, age, or whether or not they have a disability. If you require additional support, equipment or resources in order to participate in the job application or interview process, please let us know.....Read more...
Lead Electronics Engineer – Mixed Signal
Location: Clevedon, Somerset
Our client is looking for an experienced Lead Electronics Engineer to join their team, playing a key role in the design, development, and leadership of a team of engineers working on power and control circuits for cutting-edge electrical systems. This exciting opportunity involves leading and mentoring a team of engineers, driving new product designs, and ensuring high-quality solutions are delivered.
The position requires strong technical expertise in power electronics, PCB design, and embedded systems, along with proven experience in leading and managing a team of hardware engineers.
Key Responsibilities for the Lead Electronics Engineer job:
Lead and mentor a team of design engineers, providing technical guidance and support.
Design, develop, and support power and control circuits (digital and analog).
Drive new product development, ensuring designs meet technical and business requirements.
Oversee electronic circuit design, PCB layout, simulation, and verification testing
Work closely with test, service, and production teams to ensure smooth product development.
Ensure compliance with ISO9001, ISO14001, and industry safety standards.
Qualifications and Experience Required for this Lead Electronics Engineer job:
Must have experience leading a team of hardware engineers.
Degree in Power Electronics, Embedded Electronics, Embedded Systems, or equivalent.
Strong background in hardware system design, including schematic and PCB layout (OrCad preferred).
Proficiency with electrical test equipment (PSUs, Load Banks, Oscilloscopes, Signal Generators, etc.).
Knowledge of firmware and software development for embedded systems is an advantage.
This is a fantastic opportunity for an experienced engineer looking to take on leadership responsibilities while working with cutting-edge electronics and power systems.
If you have the skills and leadership experience and are ready for a challenging and rewarding role, we want to hear from you!
Please send your CV to NDrain@redlinegroup.Com or call 07487 756328 to speak with Nick for more information.
Lead Electronics Engineer – Mixed Signal
Location: Clevedon, Somerset
Our client is looking for an experienced Lead Electronics Engineer to join their team, playing a key role in the design, development, and leadership of a team of engineers working on power and control circuits for cutting-edge electrical systems. This exciting opportunity involves leading and mentoring a team of engineers, driving new product designs, and ensuring high-quality solutions are delivered.
The position requires strong technical expertise in power electronics, PCB design, and embedded systems, along with proven experience in leading and managing a team of hardware engineers.
Key Responsibilities for the Lead Electronics Engineer job:
Lead and mentor a team of design engineers, providing technical guidance and support.
Design, develop, and support power and control circuits (digital and analog).
Drive new product development, ensuring designs meet technical and business requirements.
Oversee electronic circuit design, PCB layout, simulation, and verification testing
Work closely with test, service, and production teams to ensure smooth product development.
Ensure compliance with ISO9001, ISO14001, and industry safety standards.
Qualifications and Experience Required for this Lead Electronics Engineer job:
Must have experience leading a team of hardware engineers.
Degree in Power Electronics, Embedded Electronics, Embedded Systems, or equivalent.
Strong background in hardware system design, including schematic and PCB layout (OrCad preferred).
Proficiency with electrical test equipment (PSUs, Load Banks, Oscilloscopes, Signal Generators, etc.).
Knowledge of firmware and software development for embedded systems is an advantage.
This is a fantastic opportunity for an experienced engineer looking to take on leadership responsibilities while working with cutting-edge electronics and power systems.
If you have the skills and leadership experience and are ready for a challenging and rewarding role, we want to hear from you!
Please send your CV to NDrain@redlinegroup.Com or call 07487 756328 to speak with Nick for more information.....Read more...
Production Engineer Acton£32,000 - £38,000 Basic + Great Working Environment + Stability + Optional Overtime + Early finishes + Holidays + Pension
Are you a production engineer, with a strong interest in physics, looking to work on scientific and high tech equipment and join a company focused on being a great place to work in a clean environment? If so, you will benefit from working in a bespoke manufacturing environment while increasing your knowledge working on niche, specialist products.
The company specialises in the design, manufacturing and supply of bespoke scientific instrumentation and electromagnetic components and products. Due to continued increase in demand worldwide, they are looking for a production engineer to join their growing company and liaise with the design team. Feel valued and rewarded with training in a bespoke industry.
Your Role As A Production Engineer: * Production Engineer role - Days position (Monday to Friday) * Manage and improve the production process * Liaise with the design engineering team - including carrying out some design work and modifications. The Successful Production Engineer Will Have: * A strong interest in physics / manufacturing (Graduates Welcome) * Knowledge and/or experience within a production or manufacturing environment * Experience with CAD / design work and modifications * Live commutable to Acton, London
Please apply or contact Sam Eastgate for immediate consideration
Keywords: production engineer, production technician, project engineer, production, design engineer, design, physics, degree, masters, MEng, PHD, Acton, London, West London. This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted. ....Read more...
An exciting opportunity has arisen for a Senior Electronics Engineer to join an innovative and future thinking business based in Berkshire. This successful company has been serving the electronics industry for over 60 years, designing, fabricating, and assembling tens of thousands of PCBs annually. Their cutting-edge facility in Berkshire offers a complete electronic design service, supporting clients across various industries, including Aerospace, Automotive, IoT, Industrial, and FMCG.
The successful Senior Electronics Engineer will work with a market-leading design team focused on developing innovative and robust electronic products. The role involves leading projects from initial concept through to final production, including schematic design, PCB layout, prototyping, testing, and customer support as products scale to volume production.
Key Responsibilities:
Lead electronic product development projects from concept to production.
Design innovative electronics and embedded firmware solutions.
Conduct automated and manual testing for electronics and software.
Act as the lead architect for assigned projects, collaborating with other engineers where needed.
Manufacture and test embedded components and harnesses for prototypes.
Participate in formal design reviews and follow an agile development methodology.
Ensure accurate documentation and maintain up-to-date project tracking (Jira, Atlassian).
Conduct EMC testing and compliance evaluations for various industry standards.
Skills and Experience:
A relevant degree or HNC/HND in Electronic Engineering, or significant proven experience in electronic product development.
Extensive industry experience in electronics design and embedded systems development.
Expertise in Altium Designer for schematic capture and PCB layout.
Ability to design and integrate digital and industrial communication buses such as SPI, I2C, UART, Ethernet, CANbus/LINbus.
Experience with task tracking tools like Jira and version control applications like Bitbucket.
Familiarity with EMC testing and certification requirements for automotive, aerospace, or medical applications is an advantage.
Experience in miniaturisation and high-density electronic designs.
APPLY NOW for the Senior Electronics Engineer position based in, Berkshire, by sending your CV and cover letter to ltemple@redlinegroup.Com or contact us on 01582 878 820 / 07961 158 785.....Read more...
Experience all areas of Protection Engineering under the guidance of an appropriate Principal, Senior or Design Engineer
Work to develop knowledge and understanding of other job functions
Gain product and site knowledge through visits to UK sites, attending training courses in the UK
Key areas to develop knowledge and understanding are:
i) General protection application design
Scheme design
Interface Engineering
Secondary cable design
Protection Intelligent Electronic Device (IED) configuration, application and specification
Current and Voltage transformer application and specification
Primary plant- overview only
Ensuring adherence to Design Specifications
Associated Health and Safety Legislation and requirements
Attending Design Reviews, Site Meetings and Technical Meetings with Client, site or office based with appropriate
Engineers to ensure Client satisfaction
ii) Production of Engineering and Test Specifications and product specification
Factory and site acceptance testing of the above systems
Ensure compliance with customer technical specifications and design intent documents
Be responsible for technical issues on allocated projects
Demonstrate compliance with the department processes and procedures
Abide by all Business Compliance requirements in line with Company policies, for example Business Conduct Guidelines & Confidential Information
Actively support the continuous improvement of Engineering systems and processes
Training:
You would be based at company full time with day release at Seta for the first two years of the apprenticeship
Training Outcome:
HNC/HND in Electrical Engineering
Employer Description:Transmission Engineering Services Ltd (TES) are based in the North East of England, the power engineering capital of the United Kingdom.
We work across the United Kingdom’s Transmission Network providing services such as Project Management, Protection and Control Engineering, Interface Engineering, CAD, Protection Settings, Factory Acceptance Testing, Principal Designer and Principal Contractor duties.Working Hours :Monday - Thursday
8am- 4:30pm
Friday
8am- 1pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience....Read more...
Design and manufacture detail tooling, jigs and fixtures for the aerospace industry
Design & manufacture tooling for both sheet metal and composite airframers
Design & manufacture tooling for Engine manufacturers
Design & manufacture tooling for Electric motor assembly & dis-assembly
Read and interpret engineering drawings
Tool care which includes Fault diagnosis and repair activities
Training:
The successful apprentice will be enrolled on the Engineering Technical apprenticeship
Apprenticeship to start in September
Training Outcome:
Potential for progression into higher-level apprenticeships
Potential for full-time employment on successful completion of the apprenticeship
Opportunity to learn from a highly skilled team of engineers
Progression through each department in the business and experience all disciplines of engineering
Employer Description:G Parker Engineering principally design & manufacture detail tooling, jigs and fixtures for the aerospace industry. We design & manufacture tooling for both sheet metal and composite airframers and engine manufacturers.
Established for over 40 years and now in its second generation of family ownership, we are dedicated to growing the company and maintaining its independence.
G Parker Engineering has been closely involved in designing & manufacturing tooling for many of the world's most prestigious aircraft programmes, including all Airbus platforms, and notably the Eclipse and Honda VLJ programmes.
Based in Accrington, Lancashire, the company's' team of highly skilled engineers and designers offer a vast wealth of aerospace tooling knowledge to its clients.
We have the capacity, capability and experience to project manage a complete tooling solution for our clients manufacturing processes.Working Hours :7am to 4:45pm Monday to Thursday with a 30-min unpaid meal break. 37-hours per week.Skills: Communication skills,Logical,Team working....Read more...
Assist the design engineers with HVAC designs and produce CAD drawings
Study building services design at one of the countrys top faciltiies
Develope skills and education in a wide variety of exciting projects
Training:
Building Services Engineering Technician 2022 Level 2 Apprenticeship Standard
Training will involve 4 days in our Newbury office with day release to london south bank
Training Outcome:
Optional progress onto degree course
Progress into design engineer
CIBSE memebership
Employer Description:We are one of Berkshire leading design and build HVAC contractor with our privately owned offices based in NewburyWorking Hours :Monday to Friday 8.30am - 5.30pm , may include the occasional additional hours or Saturday.Skills: Communication skills,IT skills,Problem solving skills,Analytical skills,Team working,Creative,Initiative....Read more...
