Experienced Embedded Software Engineer required to join an existing programming and control team using Model Based Design methodology for battery solutions using C and C++.
Skills
Embedded software development experience in industry.
MATLAB and Simulink modelling and simulation.
Experience developing software test plans and implementing software unit testing and integrated Testing using MIL, SIL and HIL.
Masters or PhD in Electrical, Electronic or Software Engineering, ideally relating to automotive and stationary energy storage application.
C, C++, Python and scripting.
MCU???s, such as Infineon, TI, NXP or ST.
Lower layer modules or drivers.
Debugging tools and troubleshooting both software and hardware.
Github, Gitlab, Bitbucket or other version control.
AUTOSAR architecture and RTE,
Vector or ETAS AUTOSAR configuration tools
Algorithms implementation in AUTOSAR and Auto-Code generation
Automotive communication protocols ETH, CAN, Flexray.
CANape, CAN analyzer, Control Desk, ECU Diagnostics
Role
Low level software development, integration, verification, and debugging, including.
MCAL, MCU, CAN, SPI, LIN, ETH, I2C, PWM, etc.
Design and develop complex platform software for powertrain electronic control units.
Configurating DEM, DCM, NM, NvM, UDS modules for Diagnostics.
Developing complex driver, OTA, and other functions as needed.....Read more...
Electrical Control and Instrumentation Designer required to join a nuclear PLC control panel implementations including cabling, MCCs, Drives, Controls, Switchgear and related EC and I nuclear equipment. This role requires travel including short periods away on customer site visits.
Requirements
Nuclear control panel design experience of PLC, I/O, Comms cards, UPS, etc.
Cabling systems P, Inst, Contr, and comms, surveying, cable sizing calculations and earth protection.
Specialist knowledge of Rockwell Control Logix, Siemens PC7S, TIA Portal or Schneider M580, M340.
Motor Control Centres specification, procurement and installation.
DSEAR Regulations and hazardous area best practices.
Functional Safety understanding of IEC 61508 or 61511.
Control system installation and commissioning experience.
BS7671 IEE 18th Edition Wiring Regulations knowledge.
Degree or HND in a relevant subject, with over years relevant experience.
Full UK driving license.
Willing to undergo security clearance checks.
Responsibilities
Produce system designs based on customer requirements and specifications.
Create Design Packs, including system drawings, schematics, wiring diagrams, and site cable drawings.
Lead and drive the project team, ensuring compliance with procedures and standards.
Support site acceptance testing and commissioning activities.
Contribute to tender documents and cost estimates. ....Read more...
AA Euro are actively recruiting a Project Manager to join a Civil Engineering contractor on a full time permanent basis. Opportunity to manage civils packages of £25m+ across some of the UK’s largest infrastructure projects.Supported by the Contracts Manager / Project Director, this is great opportunity to join a highly successful developing business in the UK with excellent opportunities for career advancement.Duties of the Role:
Lead one or multiple project teams to ensure that contracts are completed on schedule, on budget and in compliance with the company and current health and safety legislation.Support the project surveyor in the management & control of contract costs & variations with regular reporting of cost projections & status to the Project Director / Contracts Manager.Develop strong relationships with our clients.Manage & assess subcontractor’s quality of work & their ability to maintain the scope of the programme.Risk ManagementLiaise with design teams to ensure design deliverable dates & details are achieved.Maintain an excellent relationship with the management team, subcontractors, and clients.Planning/scheduling of works.
Skills & Experience Required for the Role:
3rd Level Construction Qualification8 Years+ experience with at least 2 in a PM roleExperience dealing with a recognised main contractorStrong commitment & ownership for all Health and Safety, Quality and Environmental systems throughout the project.Excellent written & verbal communication skillsExcellent time management & organisational skillsIT Fluency and familiar with MS packages and MS Project (or similar scheduling packages).Proven record of delivering large scale Industrial / Civils projects (ideally experience of RC works, earthworks & underground services)You will be responsible for delivering projects (value £3m - £25M) from design stage to completion so must be capable of taking responsibility for a number of projects concurrently if required.
INDUK....Read more...
RESIDENTIAL AV Project Manager - This new role is seeking an experienced av project manager that has an understanding of the design process and who now wants to work with a succesful custom installation integrator. You will take the initial system design brief from the cradle to the grave. An understanding of AV Systems gained from the high-end residential sector is an absolute must along with the delivery on time and on budget of £250k+ projects that can last anything up to 2 years is ideal. You will have exceptional eye for detail and be a full team player Good with projecting reporting, understanding timescales and dealing with programme changes and how this effects costs. Previous experience working with UHNWI (end users), interiors designer M&E contractors and well as design consultancies is fully needed for this position. This role requires you to be tech savvy with the latest Crestron, Lutron, CONTROL4, High End audio and related Switching / networking kit knowledge. If you have the desire to work with the best, then please send me a fully detailed CV to find out more.
YOU MUST BE LIVING IN THE UK AND ALLOWED TO WORK HERE LEGALLY AND SHOW A CLEARLY DEFINED SKILL SET WITHIN THE CV
AV A-V A/V AUDIOVISUAL AUDIO-VISUAL AUDIOVISUAL LIGHTING SOUND VIDEO AUDIO CRESTRON DSP LUTRON DALI CEDIA CI CUSTOM INSTALL HOME AUTOMATION SMARTHOME INTEGRATION INSTALLATION RESIDENTIAL EXCEL GANTT MICROSOFT OFFICE LONDON....Read more...
Holt Executive is partnered with a leading provider of high-quality engineering and manufacturing solutions, renowned for delivering innovative engineering solutions across various markets including Aerospace, Defence and Automotive. As part of their ongoing growth, they are seeking a Test Engineer to join their dynamic team and help drive the continued success of the company.
Key Responsibilities of the Test Engineer:
- Develop, implement, and execute test plans and procedures to validate the functionality and performance of products and systems.
- Perform testing of prototypes and final products, ensuring they meet design specifications, safety standards, and regulatory requirements.
- Work closely with design, engineering, and production teams to identify potential issues early in the product development process.
- Analyze test data and results to identify defects, failures, or areas of improvement and provide detailed feedback for design optimization.
- Troubleshoot and resolve testing issues, using problem-solving skills to identify root causes and implement solutions.
- Ensure compliance with industry standards and safety regulations during testing and validation processes.
- Create and maintain detailed test reports, documentation, and records for internal and external review.
- Contribute to continuous improvement initiatives, recommending modifications to testing methods, processes, or tools to increase efficiency and accuracy.
Key Experience & Qualifications of the Test Engineer:
- 3+ years of experience as a Test Engineer or in a similar role within the engineering or manufacturing sectors.
- Proven experience with testing and validating engineering systems, components, or products, preferably within the electronics or manufacturing industry.
- Strong understanding of testing methodologies, tools, and techniques, including automated and manual testing approaches.
- Experience with defect tracking, root cause analysis, and reporting test results in a clear and actionable manner.
- Familiarity with industry standards and regulatory requirements related to product testing (e.g., CE, UL, ISO).
- Excellent problem-solving skills and attention to detail, with the ability to identify issues and implement corrective actions.
- Strong communication skills to collaborate effectively with engineering, production, and quality assurance teams.
- A degree in Engineering, Electronics, or a related field is preferred.
If you are a detail-oriented and results-driven Test Engineer, looking for a challenging role with an innovative leader in the engineering and manufacturing industry, we would love to hear from you. Apply today, and one of our consultants will reach out to discuss the opportunity further.....Read more...
Technical Coordinator - Temporary 9-month contractWe are looking for a Technical Coordinator for a minimum of 9 months to provide extensive assistance to our land and planning team due to our huge planning workload.The role would suit someone who is already freelancing or currently between roles and would be happy to join us on a temporary basis.Ideally we are looking for candidates with a bias towards civil engineering to complement our existing team where you will help achieve the departments operating responsibilities for all stages of the design process including statutory approvals. You will also optimise the scope and requirements of the project providing cost effective and technically accurate design solutions to maximise return on investment. You will have a proven track record within a design environment with a B.I.A.T./Degree or similar. A sound knowledge of building regulations, warranty providers and SAPS is essential.Key Requirements:
Degree qualification or similarMinimum 5 to 10 years proven experienceOrganisational abilitySuperior written and verbal communicationSound judgementAnalytical skillsDetail-oriented, problem solverComfortable working under pressure and with competing demandsIn-depth knowledge and understanding of the planning process from a technical perspective
What We Offer:
Working Monday to Friday 8.00am to 5.00pm24 days holidays pro rata to your contractAccess to the company pensionDiscretionary bonusEyecare schemeSupplier discount schemeFree parking
How to ApplyIf you would like to apply, please send in your CV with a covering letter to the link provided & we will be in direct contact.We reserve the right to close this advertisement if we receive a high volume of suitable applications or when the position is filled.....Read more...
Holt Executive is proud to be recruiting on behalf of a pioneering space organisation focused on sustainable satellite operations and in-orbit servicing. We are seeking an experienced and driven Payload Systems Engineer to join their growing engineering team in Harwell, UK.
This is an exciting opportunity to work on innovative missions, contributing to the development, integration, and testing of advanced payloads, including cutting-edge technologies like optical sensors, RF systems, and onboard processing units.
Key Responsibilities:
- Define and manage payload system requirements, interfaces, and performance budgets.
- Work closely with multidisciplinary teams to design and develop payload architectures for satellite missions.
- Lead technical trade-offs, analyses, and feasibility studies for payload components and subsystems.
- Oversee integration, verification, and validation of payload hardware and software.
- Collaborate with external suppliers and partners to manage the development and delivery of payload elements.
- Support mission operations teams in preparing for in-orbit commissioning and performance monitoring.
Requirements:
- Bachelors or Masters degree in Aerospace Engineering, Electrical Engineering, Physics, or related discipline.
- Solid experience working on space payload systems, preferably in LEO or GEO missions.
- Strong understanding of electro-optical, RF, or onboard data processing payloads.
- Familiarity with payload interface design, testing, and qualification processes.
- Experience collaborating with hardware and software teams across system-level development cycles.
- Ability to work independently and within a collaborative, cross-functional environment.
Desirable Skills:
- Knowledge of in-orbit servicing, rendezvous and proximity operations (RPO), or satellite inspection missions.
- Experience with tools like MATLAB, STK, or simulation/modeling software.
- Exposure to ECSS or NASA standards for spacecraft systems.
- Previous involvement in mission design, AIT, or payload commissioning.
Whats on Offer:
- Work on meaningful, high-impact missions that support the future of space sustainability.
- Competitive salary and comprehensive benefits package.
- Collaborate with a highly skilled, international team on next-gen space systems.
- Hybrid working model and flexible hours.
- Excellent opportunities for professional development and career growth.
If youre passionate about solving complex space challenges and building systems that make a difference, this is the opportunity for you. Apply today or reach out to Holt Executive for more details.....Read more...
The ideal candidate will have a high level of personal motivation, a passion for the environment and an aptitude for learning digital applications including graphics and design packages. The role will provide excellent opportunities to develop the skills required to be a landscape technician and will include both office and site-based work. The candidate will work as part of a well-established landscape team and alongside other environment professionals including ecologists and heritage consultants.
The candidate’s typical daily responsibilities will include:
• Undertaking site surveys, as part of new design projects and in support of Landscape and Visual Impact Assessments
• Capturing photography in accordance with industry guidelines and standards
• Preparing designs, drawings and visualisations using graphic’s packages such as Computer Aided Design (CAD) and Adobe Suite
• Processing landscape data including photography and written information using applications such as Excel, Word and InDesign packages
The candidate’s long-term responsibilities will include:
Providing support to members of the landscape team in the co-ordination of landscape data, preparation of project deliverables including designs, specifications, reports, visualisations and presentation material.Training:An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.Training Outcome:Successful completion of this course will enable you to confidently advance in this industry. You may wish to progress your skills further by training as a chartered landscape architect.Employer Description:We’re a management, engineering and development consultancy which works on projects across the world. By challenging norms, we like to solve humanity’s most difficult problems. We’re committed to making a positive contribution to the wellbeing of our staff as well as the environment, and communities in which we operate.Working Hours :Monday - Friday, 9.00am - 5.00pmSkills: Communication skills,IT skills,Attention to detail,Analytical skills,Logical,Team working,Creative....Read more...
AA Euro are actively recruiting a Project Manager to join a Civil Engineering contractor on a full time permanent basis. Opportunity to manage civils packages of £25m+ across some of the UK’s largest infrastructure projects.Supported by the Contracts Manager / Project Director, this is great opportunity to join a highly successful developing business in the UK with excellent opportunities for career advancement.Duties of the Role:
Lead one or multiple project teams to ensure that contracts are completed on schedule, on budget and in compliance with the company and current health and safety legislation.Support the project surveyor in the management & control of contract costs & variations with regular reporting of cost projections & status to the Project Director / Contracts Manager.Develop strong relationships with our clients.Manage & assess subcontractor’s quality of work & their ability to maintain the scope of the programme.Risk ManagementLiaise with design teams to ensure design deliverable dates & details are achieved.Maintain an excellent relationship with the management team, subcontractors, and clients.Planning/scheduling of works.
Skills & Experience Required for the Role:
3rd Level Construction Qualification8 Years+ experience with at least 2 in a PM roleExperience dealing with a recognised main contractorStrong commitment & ownership for all Health and Safety, Quality and Environmental systems throughout the project.Excellent written & verbal communication skillsExcellent time management & organisational skillsIT Fluency and familiar with MS packages and MS Project (or similar scheduling packages).Proven record of delivering large scale Industrial / Civils projects (ideally experience of RC works, earthworks & underground services)You will be responsible for delivering projects (value £3m - £25M) from design stage to completion so must be capable of taking responsibility for a number of projects concurrently if required.
INDUK....Read more...
A prominent player in the luxury interiors industry is seeking a talented Group Creative Designer to join their dynamic team in Dartford on a 12-month Maternity cover contract. This is an exciting opportunity for a creative professional to make a significant impact on the visual identity of multiple brands.
As the Group Creative Designer, you will play a crucial role in developing and executing innovative design solutions across various print and digital media channels. Your creative expertise will contribute to the success of our client's diverse portfolio of brands, ensuring consistent and impactful visual communication.
Responsibilities:
Design and produce brand-related creative collateral for print and digital media, including brochures, email marketing, social media, website banners, and promotional materials
Create innovative ideas and designs, presenting them in a context that is easily understood by the team, client, or customer
Execute image manipulation, retouching, and layout to enhance visual appeal
Conceptualize visuals based on commercial briefs, ensuring accuracy and adherence to brand guidelines
Collaborate with the wider creative team to art-direct on-trend CGIs and photography
Work closely with the Digital & Communications team to provide critical assets for brand websites, social media, PR, and advertising
Coordinate the creative approach across each brand within the showroom and other display spaces
Requirements
A degree in Graphic Design or a similar field
Commercial experience, either in-house or within a creative agency
Fluency in Adobe InDesign, Illustrator & Photoshop
Experience in email design and build using Mailchimp or equivalent software
Talent for creative thinking and problem-solving, with the ability to work methodically and meet deadlines
Keen eye for aesthetics and details
Excellent organisational skills and time management
Strong communication skills and the ability to work collaboratively or independently
Benefits include:
25 days' holiday plus Bank Holidays
Auto-enrolment in a government pension scheme
4x salary life assurance
Private healthcare salary sacrifice scheme
Buying and selling of annual leave is available
Financial support programme available
Access to an employee assistance programme
Quarterly nights out with the team, paid for up to £25 per head
Discounted gym membership
Christmas party and Summer Family Fun Day
Discounted travel prices on Arriva public transport in Kent
Contributory defined contribution pension scheme
At KHR we take care to ensure that you are represented as well as possible so it is worth checking your CV for layout, spelling and grammar as well as making sure it is up to date before you submit. If you feel you need to highlight particular qualifications, skills or relevant experience with regards to a specific role then please add a cover letter or a preface page. This does not need to be formatted in the same manner. In addition, if your CV is heavy with graphics etc, please could you also submit a "clean" copy in Word. Thank you.
KH Recruitment Ltd is acting as an Employment Business in relation to this vacancy. KHR - Recruitment Specialists is a trading name of KH Recruitment Ltd. Keep in touch with us online for job alerts, industry updates and market trends…
....Read more...
Please note that this job description is a general overview and responsibilities may evolve over time. The role involves identifying security risks, threats and vulnerabilities to inform information security systems and design effective security controls. It includes identifying attacks, unusual behaviour, supporting security risk assessments, incident management, configuring security technology, and developing scripts for deploying configuration and querying logs. Responsibilities also cover reviewing logs and configuration, cybersecurity operations, participating in simulations, and staying updated with industry trends. The role requires consideration of current and future security configuration of Microsoft Azure, AWS, local networks and internet connectivity. You’ll be implementing security controls and preventing data breaches using a selection of industry tools and techniques. In addition to the above, you will also:
Identify security vulnerabilities in a system to ensure security is effectively maintained.
Identify security threats and risks to a system, service or processes to inform risk assessments and design of security features.
Research and investigate attack techniques and recommend ways to defend against them.
Support cyber security risk assessments, cyber security audits and cyber security incident management.
Develop security designs with design justification to meet the defined cyber security parameters.
Configure, deploy and use computer, digital network and cyber security technology.
Develop program code or scripts for a computer or other digital technology for example exploring security log information and applying security baseline configurations to computer systems. Write reports, give verbal reports and presentations in the context of the cyber security role.
Manage cyber security operations processes in accordance with organisational policies and standards and business requirements.
Participate in cyber security simulations (technical & non-technical) for example to better understand cyber-attack and defence, rehearse responses, test and evaluate cyber security techniques.
Keep up to date with industry trends and developments to enhance relevant skills and take responsibility for own professional development.
Work from a given design requirement to design, build and test digital networks.
Analyse security requirements and develop a security case taking account of all applicable laws and regulations.
Implement structured and reasoned security controls in a digital system in accordance with a security case.
Prevent security breaches using a variety of tools, techniques and processes.
Training:Expected duration: 21 months Apprenticeship level: Level 4 Programme: Cyber Security Technologist (Engineer pathway)
During this apprenticeship, you will follow a fully supported training programme with LearnTech, delivered through combined weekly remote classroom-based training, workplace assessment/training and online learning working towards completing the Level 4 Cyber Security Technologist qualification.
The training covers the following core occupational duties:
https://www.instituteforapprenticeships.org/apprenticeship-standards/cyber-security-technologist-2021-v1-0 Training Outcome:
Upon competion of the apprenticeship, the applicant will have a Level 4 qualification as a cyber security technologist.
Employer Description:GivEnergy is the UK’s no. 1 provider of residential battery storage systems, with a mission to empower energy freedom for all. The GivEnergy range includes inverters, battery systems, EV chargers, energy management software, and a host of supporting accessories. Together, these products create an end-to-end ecosystem for customers to control their energy. With a GivEnergy system, customers can store energy – either from the grid and/or renewables. They can then peak shave and power their lives cheaply, sustainably, and with informed autonomy.Working Hours :Monday to Friday, shifts to be confirmed.Skills: Communication skills,Attention to detail,Problem solving skills,Analytical skills,Team working,Computer networks - Basic,Operating systems knowledge,Familiarity with security tool,Up to date with cyber trends,Basic code writing....Read more...
An exciting opportunity has arisen for an Electronic PCB Layout Engineer based in Great Yarmouth, Norfolk, to join a leading engineering company that design a range of electronic systems for aerospace and defence applications.
The main purpose of the Electronic PCB Layout Engineer role, based in Great Yarmouth, Norfolk, is to provide microelectronic product design expertise from new product introduction through to product launch. You will be developing cutting edge technologies on both PCBA and thick film hybrid circuit layouts.
Some of the key experiences and competencies for the Electronic PCB Layout Engineer, based in Great Yarmouth, Norfolk will require familiarity with PCBA techniques along with exposure to mechanical packaging / CAD package.
This is a great opportunity to join a highly successful, multi-national engineering company with a fantastic working environment and benefits.
Apply Now, if this Electronic PCB Layout Engineer job based in Great Yarmouth, Norfolk sounds like the opportunity for you, click the APPLY NOW button, or alternatively call Tom Drew on 01582 878 848 or email TDrew@redlinegroup.Com quoting THD1298. Alternatively, if this job is not suitable but you are looking for a job within Engineering, please call 07961158762 for a confidential discussion.....Read more...
Working with CAD software to assist in the design and development of maritime projects.
Collaborating with experienced Civil Engineers on various projects.
Applying Civil Engineering principles to real-world scenarios.
Participating in project meetings and discussions.
Balancing practical work with academic studies at Northumbria University.
Training Outcome:Once qualified, Royal HaskoningDHV can offer you progression within our Maritime team, with opportunities to progress to Senior and Principal Engineers. If line management is something that interests you in the future, that is also something we can offer. Employer Description:Royal HaskoningDHV is a leading international engineering consultancy firm, established in 1881. With over 6,600 professionals across 25+ countries, we specialize in engineering, design, and consultancy services. Our mission, "Enhancing Society Together," drives us to create sustainable solutions for the built environment, infrastructure, and industry.Working Hours :Monday to Friday between 8:30 to 17:00.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Number skills,Analytical skills,Creative,Initiative....Read more...
Role: Senior Electrical Engineer - Renewables Location: Glasgow Salary: £75-85,000 DOE, Hybrid Working Role Overview A leading technical consultancy is seeking an experienced Electrical Engineer to join its team in Glasgow. This consultancy has built a strong reputation over the past 30 years, supporting innovative energy infrastructure projects across the UK and Ireland. The role will involve working on energy projects contributing to the transition to net zero, providing technical expertise to developers, investors, and asset owners. Key Responsibilities Electrical design and commissioning of industrial, utility, and renewable power projects.Managing client-facing projects, ensuring technical excellence and successful delivery.Working with HV (up to 400kV), MV, and LV systems, including embedded generation, protection circuits, grid connections, switchgear, and substations.Coordinating with UK Distribution Network Operators (DNOs).Conducting feasibility studies and design reviews.Ensuring compliance with health, safety, and welfare standards within engineering.Witnessing site and factory acceptance testing.Assessing manufactured or fabricated items for faults.Providing site-based construction monitoring.Collaborating as part of a wider electrical engineering team.Willingness to travel across Scotland, England, and occasionally within the EU.About YouTechnical Expertise – Strong knowledge of HV (up to 400kV), MV, and LV systems, including grid connections, substations, switchgear, and protection circuits.Project & Client Management – Experience in electrical design, commissioning, and managing projects in industrial, utility, or renewable energy sectors.Analytical & Software Skills – Proficiency in industry-standard electrical software and the ability to conduct feasibility studies, design reviews, and fault assessments.Site & Safety Awareness – Hands-on experience with site and factory acceptance testing, construction monitoring, and a strong understanding of health and safety in engineering.Collaboration & Flexibility – A proactive team player willing to travel within the UK and occasionally the EU, with excellent communication and stakeholder engagement skills.Desirable SkillsA degree in Electrical or Power Systems Engineering.Post-qualification experience in industrial electrical infrastructure.Proficiency in industry-standard electrical software.Full UK driving licence.Full right to work in the UK.BenefitsCompetitive salary with a bonus scheme of up to 20% of salary.Support for vocational qualifications, career development, and chartership.Electric vehicle leasing scheme.Private medical and life assurance.Cycle to work scheme.Team and company social events.Milestone scheme celebrating long-term contributions.About Us Climate17 is a purpose-driven, international Renewable Energy & Sustainability recruitment firm. We support organisations committed to environmental sustainability and the decarbonisation of the energy sector. Inclusive Application Process Climate17 is committed to creating a diverse, inclusive, and equitable workplace. We believe there is no solution to climate change without people. We aim to increase diversity across all areas and as such, we are committed to partnering with clients and candidates to create an inclusive and sustainable regenerative world. ....Read more...
Role: Senior Electrical Engineer - Renewables Location: Glasgow Salary: £75-85,000 DOE, Hybrid Working Role Overview A leading technical consultancy is seeking an experienced Electrical Engineer to join its team in Glasgow. This consultancy has built a strong reputation over the past 30 years, supporting innovative energy infrastructure projects across the UK and Ireland. The role will involve working on energy projects contributing to the transition to net zero, providing technical expertise to developers, investors, and asset owners. Key Responsibilities Electrical design and commissioning of industrial, utility, and renewable power projects.Managing client-facing projects, ensuring technical excellence and successful delivery.Working with HV (up to 400kV), MV, and LV systems, including embedded generation, protection circuits, grid connections, switchgear, and substations.Coordinating with UK Distribution Network Operators (DNOs).Conducting feasibility studies and design reviews.Ensuring compliance with health, safety, and welfare standards within engineering.Witnessing site and factory acceptance testing.Assessing manufactured or fabricated items for faults.Providing site-based construction monitoring.Collaborating as part of a wider electrical engineering team.Willingness to travel across Scotland, England, and occasionally within the EU. About You Technical Expertise – Strong knowledge of HV (up to 400kV), MV, and LV systems, including grid connections, substations, switchgear, and protection circuits.Project & Client Management – Experience in electrical design, commissioning, and managing projects in industrial, utility, or renewable energy sectors.Analytical & Software Skills – Proficiency in industry-standard electrical software and the ability to conduct feasibility studies, design reviews, and fault assessments.Site & Safety Awareness – Hands-on experience with site and factory acceptance testing, construction monitoring, and a strong understanding of health and safety in engineering.Collaboration & Flexibility – A proactive team player willing to travel within the UK and occasionally the EU, with excellent communication and stakeholder engagement skills. Desirable SkillsA degree in Electrical or Power Systems Engineering.Post-qualification experience in industrial electrical infrastructure.Proficiency in industry-standard electrical software.Full UK driving licence.Full right to work in the UK.BenefitsCompetitive salary with a bonus scheme of up to 20% of salary.Support for vocational qualifications, career development, and chartership.Electric vehicle leasing scheme.Private medical and life assurance.Cycle to work scheme.Team and company social events.Milestone scheme celebrating long-term contributions. About Us Climate17 is a purpose-driven, international Renewable Energy & Sustainability recruitment firm. We support organisations committed to environmental sustainability and the decarbonisation of the energy sector. Inclusive Application Process Climate17 is committed to creating a diverse, inclusive, and equitable workplace. We believe there is no solution to climate change without people. We aim to increase diversity across all areas and as such, we are committed to partnering with clients and candidates to create an inclusive and sustainable regenerative world. ....Read more...
PRODUCT MANAGER – ECOMMERCE BIRMINGHAM – OFFICE BASED UP TO £60,000 + MARKET-LEADING COMPANY + MASSIVE CAREER PROGRESSION
THE OPPORTUNITY: Get Recruited is partnering with a rapidly growing, market-leading business in their search for an experienced Product Manager. This is an exciting opportunity to take ownership of a multi-country Ecommerce operation and drive its growth across five European markets.
You will oversee site management, catalogue development, SEO, conversion rate optimisation (CRO), user experience (UX), technology & platform management, design, and email marketing. You will also manage and develop a high-performing team, ensuring best-in-class Ecommerce performance.
THE ROLE:
Site Management: Oversee the company’s Ecommerce platforms across five European countries, ensuring optimal performance and user experience.
Catalogue Management: Maintain and optimise a large product catalogue, ensuring accurate and compelling product listings.
SEO Strategy: Implement both on-page and off-page SEO best practices, including content strategy (blogs, product descriptions, etc.).
Conversion Rate Optimisation (CRO): Analyse and improve the customer journey, particularly from product pages to checkout, to increase sales.
User Experience (UX): Continuously enhance the site’s usability and performance to improve engagement and conversion rates.
Technology & Platform Management: Oversee the Magento platform, collaborating with internal teams and external partners to ensure efficiency.
Design Oversight: Work closely with design teams on both digital and offline assets, including photography, social media content, and requests from country managers.
Email Marketing: Manage and optimise email marketing campaigns via Marketing Cloud to drive engagement and revenue.
THE PERSON:
Must have hands on experience with Magento and SEO
At least 2 years of team management experience
Strong experience with Magento, WordPress, Google Analytics (GA), Google Console, Google Merchant Center, Bing Ads, and Tag Manager
Get Recruited is acting as an Employment Agency in relation to this vacancy.....Read more...
AA Euro Group are looking for a Lead Electrical Engineer to join a clint of ours fitting out a large Data Centre just outside Cardiff, Wales. This is a full-time permanent position and prior experience fitting out Data Centres is essential.Key Responsibilities:
Lead the electrical engineering team through all project phases, from design coordination to installation and commissioning.Ensure the project is delivered on time, within budget, and meets quality and safety standards.Review electrical designs, drawings, and specifications, ensuring compliance with industry standards and client requirements.Oversee subcontractors and suppliers, ensuring effective collaboration and adherence to project timelines.Implement and monitor health & safety protocols on-site in line with regulations and company policies.Conduct technical reviews and provide solutions to any design or installation challenges.Liaise with clients, consultants, and project stakeholders, ensuring clear communication and reporting.Coordinate with other disciplines to ensure seamless MEP integration.Lead the testing, commissioning, and handover of electrical systems.
Requirements:
Degree in Electrical Engineering or a related field.5+ years of experience in electrical engineering within M&E contracting.Proven experience in Data Centre or large-scale commercial/industrial fit-out projects.Strong understanding of HV & LV power distribution, UPS systems, generators, and BMS.Excellent leadership and project management skills.Knowledge of industry standards and regulations (e.g., BS7671, IEC, etc.).Proficiency in AutoCAD, Revit, and electrical design software is desirable.Ability to troubleshoot technical issues and provide effective solutions.Strong communication and stakeholder management skills.Valid right to work in the UK/Ireland.
Benefits:
Competitive salary and benefits package.Opportunity to work on cutting-edge Data Centre projects.Career progression within a leading M&E contractor.Support for further training and professional development.
If you are a motivated Lead Electrical Engineer with a passion for delivering high-quality Data Centre projects, we would love to hear from you!INDUK....Read more...
Electronics Engineer – Cancer Instrumentation – Cambridge
A growing Medical Devices Division is currently seeking an Electronics Engineer to contribute to the development of new Cancer Instrumentation devices, based in South Cambridge.
You will work on a wide range of electronics design tasks, including, but not limited to, power electronics, digital/analogue electronics, RF, and other complex fields such as thermal, motion control, and electro-mechanical or electro-medical devices. While it is not expected that you have experience in all these areas, having expertise in as many as possible would be advantageous.
Specifically, you will need experience working within the Medical Devices sector adhering to ISO 13485 or EN 60601 standards. You will focus on Cancer Instrumentation devices designed to improve the survival rates of cancer patients. However, experience in other Medical Devices or Scientific Instrumentation will also be considered.
The company boasts state-of-the-art labs and workshops specially designed to support your success. They also provide on-site gym facilities, nearby running and cycling tracks for your fitness needs, and wellness programs to assist you as needed.
It is expected that you hold a degree in electronics or a related field that has prepared you for an electronics engineer role within the Medical Devices sector.
In addition to the challenging work and exceptional facilities, you will receive a competitive starting salary, bonuses, pension benefits, healthcare coverage, dental benefits, and other perks typically associated with blue-chip companies.
If you are interested in working on life-saving technologies, we recommend applying now to avoid missing out on this excellent opportunity.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
My client is a world leader in its field, and part of a globally successful UK-based business. They design, manufacture, sell and support a range of highly advanced threat detection and security products for global markets in commercial, aviation, defence and security sectors. The products range from small hand-held devices through to large systems, and are sold and supported via an extensive global network. Continued expansion and internal promotion is creating opportunities for talented, ambitious individuals to join their team in Hertfordshire, UK.
For this Test Development Engineer job you will be responsible for the development of high quality, high demand products sold into a regulated environment and supporting the product design throughout its life, making continuous improvements to improve product value.
Main responsibilities for this Test Development Engineer job include working with colleagues in R&D and Manufacturing to sustain existing manufacturing activities and introduce new manufacturing capabilities for existing product and for New Product Introductions.
The Test Development Engineer, will be involved in the following
- Fault Finding & Diagnostics, demonstrating extensive fault-finding experience at the component level in the development and testing of electronic products.
- Support existing manufacturing by responding to electronics related problems, and continuous improvement of existing electronics test environment
- Work with external suppliers
The skills/experience needed for this Test Development Engineer job are:
- Proven Fault-Finding experience diagnosing and troubleshooting down to component level.
- Experience with mixed signal board designs that integrate Power supplies, both low and high voltage.
- Competent user of schematic capture & simulation tools.
- Familiar with electronics manufacturing methods.
- Electronic Engineering Degree / HNC (or equivalent), with provable design experience.
This Test Development Engineer must be eligible to pass SC clearance and therefore VISA sponsorship can’t be considered.
My client in Hertfordshire offer great progression and benefits including hybrid working with the option to work up to two days at home.
This is an excellent job opportunity to join a developing and leading company. To apply for this Test Development Engineer job based in Hemel Hempstead, Hertfordshire pleased send your CV to RWilcocks@Redlinegroup.Com or call Ricky on 01582 878810....Read more...
Production Quality Engineer – Medical Devices
Newton Colmore is working with a medical technology company near Lichfield, and we are assisting them with their search for a key quality hire to work closely with their production team.
The role as an experienced quality engineer will give you the opportunity to work on market leading medical devices whilst working closely with the production team to ensure that the parts delivered from the company’s suppliers meet the design specifications and quality requirements The quality engineer will help the production team in supplier quality assessments including creating and following up on SCARs and will also ensure that the Device History Record (DHR) is up to date for products manufactured. This is a key new role within the team, and you will be reporting directly to the head of the team and collaborating with the five members of the production team.
This role will also cover key responsibilities such as incoming inspection of parts, customer returns, and ensuring that document control, CAPA, and the complaints process is followed effectively.
The company is looking for an experienced quality engineer with medical technology knowledge, mixed with strong document control and inspection testing skills.
In return for your hard work the company offer a competitive salary and benefits package as well providing excellent career progression opportunities and hands on training.
In regard to the process, there is a two-stage interview process where you will be invited to showcase your skills and experience, while finding out more about the company, their mission, and what they can offer you.
To enter the recruitment process click apply now and if you have the right skills and expertise, I will be in touch to discuss the opportunity further.
Newton Colmore Consulting is a highly specialist recruitment consultancy operating within the medical devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors throughout Europe and the US.
Keywords: Medical Devices, Quality Engineer, Quality Control, ISO 13485, QMS, Project Engineer, ISO 14971....Read more...
The Company:?
This is a great opportunity to join a recognised company who are market leaders within Excavation Support and Temporary Works,
All Design and Manufacture for the provision of modular and bespoke excavation support systems are done in house.?
Well regarded for their personal and high level of customer service.??
Professional and forward thinking company that invests in their employees’ personal development – great place to develop a career.?
Technical Sales Representative-
As a Technical Sales Representative, you will be responsible for supplying excavation supports to civil contractors, ground workers, and end users throughout the East London & Essex area.
The Technical Sales Representative will focus on maintaining and developing relationships with well-established customers while also driving new business opportunities.
In this role, the Technical Sales Representative will provide Design Request Forms to support temporary works designs.
Additionally, the Technical Sales Representative will manage appointments and schedules efficiently through strategic planning and time management.
To ensure seamless operations, the Technical Sales Representative will liaise with internal staff within the Depots and Design teams, guaranteeing timely product delivery.
Benefits of the Technical Sales Representative?
£30k-£38k Basic Salary?
Uncapped OTE- No Threshold or Cap.?
Company Car+ Fuel OR Car Allowance??
Pension??
Life Assurance
22 days + Bank Holidays (increases with service)?
Discretionary Company Performance Bonus
?
The Ideal Person for the Technical Sales Representative??
The ideal candidate will be an experienced area sales manager/technical sales/field sales representative.
Ideally you will have sold a construction product to main contractors and groundworkers on site.
The ideal Technical Sales Representative will be hungry, tenacious, and can build relationships over a period of time?
You will want to build a career and develop with the company.?
Must have a full driving licence
?
If you think the role of Technical Sales Representative is for you, apply now!?
?
Consultant: Sarah Dimmock ?
Email: sarahd@otrsales.co.uk??
Tel no. 0208 397 4114?
Candidates must be eligible to work and live in the UK.?
?
About On Target?
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.....Read more...
AA Euro Group are looking for a Lead Electrical Engineer to join a clint of ours fitting out a large Data Centre just outside Cardiff, Wales. This is a full-time permanent position and prior experience fitting out Data Centres is essential.Key Responsibilities:
Lead the electrical engineering team through all project phases, from design coordination to installation and commissioning.Ensure the project is delivered on time, within budget, and meets quality and safety standards.Review electrical designs, drawings, and specifications, ensuring compliance with industry standards and client requirements.Oversee subcontractors and suppliers, ensuring effective collaboration and adherence to project timelines.Implement and monitor health & safety protocols on-site in line with regulations and company policies.Conduct technical reviews and provide solutions to any design or installation challenges.Liaise with clients, consultants, and project stakeholders, ensuring clear communication and reporting.Coordinate with other disciplines to ensure seamless MEP integration.Lead the testing, commissioning, and handover of electrical systems.
Requirements:
Degree in Electrical Engineering or a related field.5+ years of experience in electrical engineering within M&E contracting.Proven experience in Data Centre or large-scale commercial/industrial fit-out projects.Strong understanding of HV & LV power distribution, UPS systems, generators, and BMS.Excellent leadership and project management skills.Knowledge of industry standards and regulations (e.g., BS7671, IEC, etc.).Proficiency in AutoCAD, Revit, and electrical design software is desirable.Ability to troubleshoot technical issues and provide effective solutions.Strong communication and stakeholder management skills.Valid right to work in the UK/Ireland.
Benefits:
Competitive salary and benefits package.Opportunity to work on cutting-edge Data Centre projects.Career progression within a leading M&E contractor.Support for further training and professional development.
If you are a motivated Lead Electrical Engineer with a passion for delivering high-quality Data Centre projects, we would love to hear from you!INDUK....Read more...
An exciting opportunity has arisen for a Lead Product Engineer based in Great Yarmouth, Norfolk, to join a leading engineering company that design a range of electronic systems for aerospace and defence applications.
The main purpose of the Lead Product Engineer role, based in Great Yarmouth, Norfolk, will be to lead microelectronic product portfolios for both New Product Introduction (NPI) and Legacy product lines. They will be working with customers on product requirements, manage change requests and documentation and component obsolescence.
Some of the key experiences and competencies for the Lead Product Engineer, based in Great Yarmouth, Norfolk will be to work to aerospace / defence standards ideally within a microelectronic product line. Packaging experience with customer designs will be beneficial along with an understanding of mechanical CAD design principles.
This is a great opportunity to join a highly successful, multi-national engineering company with a fantastic working environment and benefits.
Apply Now, if this Lead Product Engineer job based in Great Yarmouth, Norfolk sounds like the opportunity for you, click the APPLY NOW button, or alternatively call Tom Drew on 01582 878 848 or email TDrew@redlinegroup.Com quoting THD1299. Alternatively, if this job is not suitable but you are looking for a job within Engineering, please call 07961158762 for a confidential discussion.....Read more...
Precision tooling manufacture
Refurbishment of tooling
New tooling development
You will become skilled in conventional milling, turning and CNC Machining
Training:
Advanced Manufacturing and Engineering Apprenticeship Standard (L3)
Level 2 Diploma in Advanced Manufacturing Engineering (Foundation Competence)
Level 3 Diploma in Advanced Manufacturing Engineering (Development Competence) – Product Design and Development
Level 3 Diploma or Extended Diploma in Advanced Manufacturing Engineering (Development Knowledge)
Toolmaker and Tool and Die Technician
First Year - College Block Release
Second Year - Day release college attendance
Training Outcome:
There may be the opportunity for higher level study or a full time permanent position
Employer Description:Over 34 years of experience in design and manufacturing
Founded in 1985, SACO remains a family-owned business located in Burnley, Lancashire. We've come a long way since opening our first factory, currently employing over 450 people across three separate factories.Working Hours :Monday - Thursday, 7.30am - 3.30pm and Friday 7.30am - 2.30pmSkills: Attention to detail,Problem solving skills,Number skills,Logical,Team working,Initiative,Patience....Read more...
The apprentice will shadow an engineering mentor daily and learn a range of new skills and they will be required to pick parts, read assembly drawings, assemble parts to drawing.
Dismantle gearboxes and rebuild using photographic evidence.
Machining of parts when required to achieve endfloats and gear backlash.
Accurate measuring of parts and attention to detail is a must within this engineering environment.
Training Outcome:Full time position.Employer Description:Radicon is committed to being the premier supplier of high quality, standard, modified standard and custom engineered gearboxes.
The Radicon product range, not only consists of the traditional standard product offering of worm gears, geared motors, couplings and industrial reducers, but also includes custom engineered gearboxes with an output torque range over 6 million Nm. The flexibility of our products, and the experience of our engineering design teams means we can design solutions to suit our customer’s exact requirements in a wide range of applications and industries.Working Hours :Monday to Wednesday, 07:30 to 16:15.
Thursday, 07:30 to 15:45.
Friday, 07:30 to 12:00.Skills: Attention to detail,Team working,Mechanically Minded,Practical,Punctual,Willing to Learn....Read more...
