JOB DESCRIPTION
SUMMARY OF JOB DUTIES:
With guidance from research management or more senior professionals, ensures that research activities in the section/group laboratories and associated operations are in compliance with the safety policies and programs of the company, as well as, local, state and federal regulations. With guidance from research management or more senior professionals, ensures that research activities in the section/group laboratories and associated operations are in compliance with the company's environmental policies and programs through execution of assigned responsibilities for reducing waste and promoting environmental protection. With guidance from research management or more senior professionals, plans and conducts experimental programs to complete a phase of a project or a number of projects of minor scope. Under close supervision, conducts research on and testing of improvement of existing products, development of new products and technology and may include routine to complex synthesis or testing. Assignment maybe a phase of a major project or a total project of minor scope. With minimal supervision from more experienced professionals, conducts routine synthesis or testing which provide experience and familiarization with methods, practices and programs (analytical, performance, physical properties, etc.). Under the guidance of more senior professionals or research management, acquires knowledge of NALCO Champion products, procedures and applications. Interfaces with section personnel in trouble-shooting problems with hardware, testing/synthesis equipment, product and methods development. May be responsible for timely calibration and maintenance of the various laboratory and equipment and documentation according to the company's business processes. With minimal guidance, conducts literature searches and gathers pertinent information related to specific topics. Under minimal supervision, compile, analyze and correlate technical data and writes timely reports on projects completed or progress reports. Writes procedures in accordance with the company's business practices. Works with research management to formulate goals aligned with the executive leadership's initiatives and for professional growth.
MINIMUM QUALIFICATIONS (special skills, knowledge, ability, education, etc.):
Requires a B.S. in Chemistry or related technical field or can be progressed from Assist Chemist (performance-based and tested) Good communication (oral and written) skills. Proficiency in computer programs necessary for writing reports and performing mathematical calculations. Knowledge of specialized scientific programs for molecular structure drawing, experimental design and statistics is a plus. Must be able to work in the United States without sponsorship
Wage: 28.00 per hour.
This position is 12.5% annual bonus eligible.
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to: medical, dental, vision, life insurance, disability, vacation, ETO, parental leave, 14 paid holidays, Personal Time off pay, 401(k) with company match, employee stock purchase plan, and pension plan. Apply for this ad Online!....Read more...
JOB DESCRIPTION
Position Summary:
Carboline is looking to hire a Chemist to join our Industrial Coatings RD&I group. This person will contribute to the testing, planning and formulation of both new and existing industrial paint/coatings. This position will be based out of our RD&I facility headquartered in St. Louis, Missouri where relocation assistance will be provided.
Essential Functions:
Assist in Development Projects of moderate to high complexity Provide support to manufacturing, internal departments, sales teams and external customers. Communicate technical results, problems, and possible solutions both written and verbal to management, sales teams and customers Troubleshoot and Resolve product/formulation problems. Contribute to new product, process development and improvements of products Identify formula adjustments, additions and deletions to products Test methods based on implementation of solutions determined via experimental work. Work effectively in a team environment.
Requirements:
Must be legally authorized to work in the country for which you are applying for employment (without now or in the future needing sponsorship for employment work visa and/or permanent residence status). Bachelor's degree in Chemistry 1+ years of coatings formulation experience is preferred but not required. Prior experience working within a lab/RD&I environment Microsoft Office (Excel, Word, PowerPoint) Willing to relocate to St. Louis with support from Carboline
Who We Are:
Carboline is a St. Louis-based coatings manufacturer with a global reach. The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world. Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions. Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace. Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online!....Read more...
JOB DESCRIPTION
Specific Requirements:
Stages and prepares all raw materials associated with production batches. Maintains orderliness and cleanliness in batch making area and proper storage of batch area inventories. Communicates low levels of raw materials to the Plant Supervisor. Develops a thorough knowledge of raw material storage tanks, valving and piping, their contents, actuation and directions of flow. Maintains a good working relationship with Quality Control. Must be capable of logical structuring of the batch making process, particularly optimization of mixer usage and efficiency. Reports all spills and leaks, equipment malfunction, safety hazards, accidents, near-miss accidents and material shortages immediately to the Production Supervisor. Acknowledges and understands the hazards and safety precautions required for working with inorganic metal-based powdered pigments and modifies work and hygiene practices accordingly.
The above description identifies only the primary duties pertaining to this position. Additional tasks are performed, as required, and do not significantly alter this description.
Background Requirements:
High School Diploma with some college level chemistry preferred. Minimum 2 years prior related experience or 1 year experience as a production batch maker. Must pass standard eye exam (corrected or uncorrected) and must pass standard color-tone testing. Must be capable of wearing Company standard respirators as qualified by a fit test performed by an authorized agency.
Physical Requirements:
Lifting up to 50 pounds. Stooping, bending, squatting up to 50% of the time. Standing and walking up to 90% of the time. Sitting - None.
Benefits: 401k w/ company match after 6 months, Pension Plan, Medical/Dental/Vision Insurance, flexible schedule, life insurance, tuition reimbursement
ABOUT US
DO WE HAVE WHAT YOU'RE LOOKING FOR? Our Construction Management Group works closely with our direct US sales team of over 150.
We provide a competitive base salary, bonus package, solid health coverage, 401K and pension plan, plus an expense package including car allowance.
You will also receive on-going training, administrative support, technical service and R&D support along with encouragement, recognition and opportunities for growth. And we stand behind our 90 year old Stonhard name and our brands.
DO YOU SEE YOURSELF WORKING WITH US? LET'S GET STARTED.
The Stonhard Group is part of RPM, International (NYSE: RPM) is headquartered in Maple Shade, NJ and has more than 95 years of experience manufacturing and installing high performance, seamless floors throughout the world. We manufacture and install long-term floor, wall and lining solutions to markets including, but not limited to: food & beverage, general manufacturing, pharmaceutical, chemical processing, education, healthcare, government, technology and hospitality. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class.Apply for this ad Online!....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Quality Managers manages the Quality Process to ensure we are effectively meeting our key business metrics and satisfying all customer product requirements. Key responsibilities include Quality, Lean and Six Sigma, and Continuous Improvement with responsibility for ISO quality systems and compliance.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Oversee all quality related functions in the plant. Act as primary plant liaison with Customers dealing with their processing issues. Participate in the development of specifications for processing, products, and materials. Work directly with Corporate and local Purchasing on vendor quality or supply issues; assist with vendor selection and qualification. Manage ISO Quality systems. Lead the lean/six sigma initiatives in the plant. Respond to and report on customer complaints - manage the root cause investigation, corrective action implementation and follow up, and the SAP quality process. Interact professionally and timely both verbally and in writing with customers and sales force. Develop quality standards for raw materials and finished product. Oversee all lab functions and personnel, assuring safety and integrity of those operations. Perform testing on raw materials and finished product as required. Implement material cost saving plans where and when appropriate. Participate in annual budget planning. Assist in all compliance activities, especially HazCom and maintaining SDS system. Other projects/tasks as assigned.
EDUCATION: Bachelors degree in Quality, Chemistry, Chemical Engineering, Materials, Polymer, or Business is required.
EXPERIENCE:
4+ years of experience is required. Experience with chemical batch-making operations and quality programs, such as Lean, ISO, Six Sigma, is required.
CERTIFICATES, LICENSES, REGISTRATIONS:
ISO certification is required
REQUIRED SKILLS, ABILITIES, AND QUALIFICATIONS:
Color Matching Knowledge Chemical Batch Making Knowledge ISO knowledge Six Sigma / Lean Thinking Training experience Strong communication skills (written, verbal) Ability to maintain confidentiality Knowledge of MRP/ERP systems (SAP) Solid computer skills (Word, Excel, Lotus Notes) Design of experiments skill
PHYSICAL DEMANDS: Incumbent must be able to stand, sit, walk, use hands, reach, climb, talk, hear, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
Systems Engineer – Medical Devices Diagnostics – London
A start-up Medical Devices company, based in Central London, is currently hiring for a Systems Engineer to join them and help accelerate the design, development, building, and testing of a novel Diagnostics technology, working to ISO 13485 Medical Devices standards.
Due to the early stage of this organisation, there is still the potential of acquiring equity. Meaning your success will have a direct impact on your future.
Your focus will be accelerating the design, development, building and testing of the hardware of this new Diagnostics Medical Device, working alongside some excellent Medical Devices Physicists, Scientists, Electronics Engineers, and Design Engineers.
This Medical Devices organisation is looking for a Systems Engineer who has worked on hardware development of a Medical Devices, Biotech System or Life Sciences Technology that have included mechatronics elements.
Apart from hardware development experience for systems design, Python programming, and design for manufacturing, providing systems documentation and BoM will also be important.
Due to the size of this company, you will be exposure to other areas of the business, including third-party meetings and attending Medical Devices and Science conferences and trade shows. Due to this, it would be ideal if you have worked for a start-up or scale-up Medical Devices company previously or worked for a Medical Devices/Scientific Design Consultancy and know what it’s like to wear multiple hats when needed.
It would be highly advantageous if you have also worked on microfluidic systems in the past, products that have had an element of chemistry, biochemistry, and medical products.
It is expected that you would hold a degree and masters in a related Medical Devices, Biomedical Engineering, Mechanical Engineering, Design Engineering, Electronics Engineering, or another relevant scientific subject.
Apart from equity, you will also be rewarded with an excellent starting salary, pension, and future career development as the company grows while also working in an interesting field on a product that could help a lot of people.
As this is an exciting role, joining a start-up company right at the beginning of their story, I’m expecting a lot of interest in the role. So, if you are interested, please apply straight away or risk missing out to someone else.
Due to the anticipated level of interest in this role, we are considering candidates with varying levels of experience, provided they process the right attitude. Therefore, if you are interested, we recommend submitting an application promptly to avoid missing out. Once the company identifies the right candidate, they will extend an offer, so we do not expect this role to remain open for long.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and Science recruitment specialists, Newton Colmore, on +44 121 268 2240 or submit an application, and a member of our team at Newton Colmore will be in touch with you.....Read more...
JOB DESCRIPTION
DAP is looking to hire Quality Engineer at our Corporate Office. The Quality Engineer works closely with Operations, R&D, Sales, Marketing, and Technical Customer Service to ensure that products manufactured in each of the plants consistently meet customer expectations at the lowest possible cost. Maintain and continuously improve the DAP Quality Management System while developing our associates. This position will be located at the DAP Corporate Office.
Responsibilities
Support DAP Quality Management System elements. Execute New Product Performance Program Testing, Analysis and Reporting. Perform Complaint Testing, Analysis, facilitate formal Root Cause Analysis, and Corrective Actions (CAPA). Participate in Plant Trials for New Product Commercialization. Oversee Routine Measurement System Analysis, Standardization of Testing & Calibration, scope & implement new testing methods / equipment. Work with various business functions to understand customer expectations and assure measurement reproduces the customer experience for effective performance measurement.
Requirements
2 + years of experience in similar technical background. Bachelor's degree in engineering or chemistry. Paint, Coating, Adhesive and Sealant industry experience preferred. Knowledge and demonstrated application of industry standard Quality Management and Quality Engineering practices. Demonstrated application of Statistical Process Control and Process Capability Analysis. Strong understanding and experience in application of analytical tools such as Gauge R&R Studies, Measurement Capability Studies, and Multivariate Testing/ Design of Experiment. Experience with material testing and generally accepted laboratory practices. Very strong problem-solving skills. Ability to effectively communicate with all levels of the organization including manufacturing plants, technical and management personnel. Strong written and verbal communication skills. ASQ Six Sigma certifications are preferred.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products. DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores. DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers. Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online!....Read more...
Job title: HSEQ Manager
Reference: E113285
Location: St Helens
Start date: ASAP
Salary: to £46,000 pa bonus, 25 days hols, 37.5 hour week
HSEQ Manager required for a successful and long established manufacturer of specialist organic and inorganic products.
The successful HSEQ Manager will have a proven track record in Quality and Health and Safety, and possess a strong technical background combined with OH&S management experience. A quality focussed, driven approach to work is also very important.
The HSEQ Manager will manage the quality department and provide support and expertise across the business units, with particular emphasis on ensuring compliance and development of existing management systems, whilst satisfying the demands and needs of customers and in addition, creating added value. Reporting to the Operations Director you will be working very closely with Production/Engineering Department and other departments on site.
As the HSEQ Manager, your main duties will include, although not limited to:
Responsibility and Management of QMS/EMS and OH&S Management systems.
Management of a busy QC Laboratory with 2 direct reports.
Carry out documented inspections, process and site audits and site support ensuring all operations meet with company policy and legislation.
Provide support on all HSEQ considerations across the site, ensuring best practice in all cases.
Provide and/or coordinate training for all staff as required relevant to your area of responsibility.
Lead incident investigation teams as required, supporting preventative and corrective measures using appropriate root cause analysis.
Drive continuous improvement across all three systems.
Ensure that business targets are met.
Proactively support the site continuous improvement drives with focus on waste reduction, noise reduction, energy reduction and efficiency.
Ensure that all monitoring and reporting systems are adhered to and maintained.
Develop working relationships with raw material suppliers and customers.
Identification of areas for improvement and innovation within the function and across departments.
Take the lead, ensuring project work is prioritised and target completion dates are met.
Manage the site risk assessments, fire audits and coordinate risk reduction actions as appropriate.
To be considered for the role, you will ideally have the following experience, skills, qualifications and attributes:
Degree in Chemistry/NEBOSH Diploma.
Experience of laboratory management.
Experience of the management of an accredited QMS/EMS including hosting external audit and conducting internal audits.
Experience in the management of a document OH&S Management system.
Experience in risk management and business continuity planning.
A proven track record in H&S compliance requirements.
Quality focussed with a high attention to detail.
Hands on attitude with the ability to lead from the front.
Ability to work as part of a cross functional team.
Driven, with the tenacity to get the job done.
Strong integrity.
Confident, professional with a ‘can do’ attitude.
Excellent communication skills.
Please note, the successful candidate can come from a Health and Safety background with a bias for QMS / EMS or can be a Chemist leaning towards Health & Safety.
On offer is
A salary to £46,000 pa
Profit related bonus
37.5 Hour working week
25 days holiday per year
Contributory pension scheme on completion of qualifying period
To apply for the role of HSEQ Manager please click apply now.....Read more...
JOB DESCRIPTION
Job Purpose:
Support the R&D team to develop innovative products and formulas, as well as improving the performance of the current portfolio and evaluating existing and new raw materials for performance and cost effectiveness.
Defined Job Responsibilities/Accountabilities:
Responsible for all aspects of product development related to nail polish formulation and working with marketing, sales, customers and suppliers as required. Independent execution of complex product briefs Creates and develops new and improved products, innovative ideas, processes, protocols and techniques to support project objectives and company goals Prepares samples for testing, such as stability, efficacy, and safety Monitors stability of products using approved stability protocols and reformulates as needed Assist with color matching projects as needed Carries out research on assigned technologies and concepts Proactively identifies and evaluates new materials to assess technical performance Designs and conducts studies to assess and understand prototype performance Initiates patent research and applications Stays on top of competitive products and novel technologies Is a technical and problem solving resource Recommends product modifications and process improvements Collaboratively supports other functions of the organization to deliver end to end results Supports the management of product testing including but not limited to consumer and safety testing Supports production in the scale-up of formulas and implementation of action plans to solve technical problems Establish and maintain effective working relationships with co-workers, team members of other departments, and customers. Maintains scientific skills and acquires the skills necessary to assure the quality of the formulations Helps to develop the scientific expertise of the laboratory Follows current Good Manufacturing, Good Laboratory, and Safety Practices Responsible for Data Management and Collection via company specific programs Maintain accurate written records of experiments and work. Document results of tests, analysis and research activities. Assists in/prepares scientific presentations to colleagues and customers
Qualifications/Skills:
5+ years of relevant industry laboratory experience with proven R&D experience - prior nail formulation or nitrocellulose experience preferred Bachelors Degree or Higher within a technical field (Chemistry, Biology, etc) Ability to prioritize and handle multiple projects within a cross-functional organization Strong technical color expertise, with color matching ability to be able to quickly distinguish and recognize differences in shades Excellent lab processing techniques and data management Experience and expertise with viscosity and rheology preferred Experience in color cosmetic formulations preferred
ABOUT US
Kirker is a custom manufacturer of nail lacquer and nail care treatment products since the 1940's that has evolved into a full turnkey operation. We are proud to offer our services in filling and packaging from free standing stock to beautifully designed packaging options and displays. With manufacturing operations in the United States and Europe, we offer the right option to fit each customer's individual requirements. Kirker offers a full range of services from product development, R&D, production, and quality control, to filling and pack off. Our cutting-edge expertise, custom formulations, and first-class service have affirmed our leadership position within the industry.Apply for this ad Online!....Read more...
JOB DESCRIPTION
Modern Recreational Technologies, is seeking an R&D Chemist. MRT consists of Pettit, Ramuc, ValvTect and Tuff Coat brands. Lab work will include developing new product formulations as well as modify existing products and services for its brands. Document and communicate research and development information with all appropriate associates. This is an excellent opportunity to join a winning team in the recreational industry.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
Learn, understand, and maintain a fundamental knowledge of market, customer, and technology business needs. Work at translating these needs into products and services that bring quantifiable value to customers and to MRT. Prepare laboratory coating formulations for project evaluations. Complete full product testing of laboratory coatings produced. Be able to review color and match colors with the assistance of a spectrophotometer. Support production with batch supervision as needed to complete new product launches. Ensure all experiments and technologies comply with safe laboratory practices and standards. Document and communicate opportunities, ideas, results, and issues in a timely manner. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Minimum Requirements: B.S. Degree in Chemistry, or Chemical Engineering 3-5 years' experience in the Chemical or Coatings industries. Desired requirements: College degree 3-5 years of lab experience Knowledge and understanding of coatings science and technology Ability to match colors in various paint applications. Understanding of coatings application and testing using ASTM standards, ISO standards, and other standards as necessary Familiar with safe operation and maintenance of laboratory and application equipment Good written and verbal communication skills Strong mathematical skills Good organizational skills No issues working around hazardous materials or smelling paint fumes Computer literate
PHYSICAL DEMANDS
Must be able to sit, stand, bend/stoop, lift, walk, kneel, crouch and climb for extended periods of time as required. Must have good hearing and vision, including peripheral vision, depth perception, and ability to correctly perceive color. The ability to lift 25 pounds frequently without assistance and up to 100 pounds with assistance as required. The employee will have to use a computer.
WORK ENVIRONMENT:
Functions performed primarily in a R&D Lab environment containing some hazardous chemical materials.
KEY PERFORMANCE INDICATORS (KPI)
Project Timelines and Goals Annual Review New product development New Products sales value Wages: From $75,000 - $90,000 per year. Benefits: Upon satisfaction of applicable eligibility requirements, include but are not limited to: medical, dental, vision, life insurance, disability, PTO days, 401(k), employee stock purchase plan, and pension.
ABOUT US
Modern Recreational Technologies "MRT" is the industry leader specializes in developing advanced coatings, additives, and services to support the recreational market segment. MRT has a rich history of developing excellent technology and providing exceptional customer service to our customers. The team at MRT is comprised of exceptional, passionate individuals who love the outdoors and are dedicated to creating solutions that maximize the recreational time our customers work hard to enjoy.Apply for this ad Online!....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Field Technical Representative ensures proper application of Tremco CPG products in accordance with all company and industry guidelines by providing on-site application and problem resolution.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Provide independent support for primary territory product lines. Recommend products and solutions outside of primary product lines with occasional direction. Provide site support by performing general and complex product applications. Perform substrate analysis using specialty equipment. Keep up-to-date technically on practical procedures, specialized techniques to apply new knowledge within the field. Provide field support by collecting data for project or product specific testing and interpreting results. Recommend application policies within technical literature. Coordinate 3rd party testing certification/approvals Provide live and/or web-based training for internal staff and/or external customers. Create instructional hands-on demonstrations in a classroom, distributor locations, or job site settings showing application of products. Exercise clear and confident communication of product lines and construction practices during presentation delivery. Use relevant information and individual judgment to determine whether designs or applications comply with local codes, industry standards, and regulations.
EDUCATION:
Bachelor's Degree in Science, Engineering, Construction, or similar preferred. and 2-4 years of construction or industry experience OR Minimum High School Diploma or GED with 5 years of construction or industry experience
EXPERIENCE: Two to four years of related experience and/or training Active listening and attention to detail Building and construction knowledge of materials, methods, and the tools involved in the construction or restoration of buildings or other structures Knowledge of product application Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models. Knowledge of chemical composition, structure, and properties of substances and of the chemical processes and transformations they undergo. This includes chemistry of current and future products and systems. Customer Service skills, including needs assessments and evaluation of customer satisfaction.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:. Excellent written and verbal communication skills Effective team player Proficient in Microsoft Office (Word, Excel, Outlook) Proven ability to understand, use, and manage your own emotions in positive ways to relieve stress, communicate effectively, empathize with others, overcome challenges and diffuse conflict. Demonstrates self-awareness and emotional self-control through adaptability, achievement orientation, and a positive outlook. Accepts and utilizes feedback effectively. Reads an audience and adjust style and approach accordingly. Strong presentations skills Excellent interpersonal and organizational skills
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally starts at $80K and goes up based on experience. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online!....Read more...
JOB DESCRIPTION
Position Summary:
Carboline is seeking a Continuous Improvement Engineer, located at our Green Bay, WI facility. This position will provide support for plant operations including managing Continuous Improvement Process and Production Process Control.
Minimum Requirements:
4 years Chemistry, Engineering degree or equivalent experience, minimum 3 years' experience. Formal training in Lean and/or Six Sigma methodologies. Ability to read and interpret documents such as procedure manuals, operating and maintenance manuals and safety rules. Ability to use a computer for all company required processes, procedures, and trainings.
Essential Functions:
Experience in identification and implementation of process optimization solutions. Understanding of Lean Manufacturing/Continuous Improvement methodologies and ability to teach and model them. Investigating shortfalls, issues, and complaints in current business processes. Ability to influence, mentor, and coach to get results through others. Collaborates with operations manager and/or plant engineering on modification of equipment and processes to reduce cost and improve efficiency and quality. Works together with R&D, engineering, and plant resources to develop and implement continuous improvement projects. Monitors and collaborates with R&D where necessary to modify production processes for existing products to improve consistency, quality, and reduce cost. Collaborates with R&D on process development - Including reviewing and approving proposed manufacturing procedures for new products. Monitors plant operating metrics to identify and implement corrective actions that positively impact cost, quality, and cycle time problem areas. Provides technical support and consultation to the Quality Control department. Specifically, regarding recovery plans for off-specification, obsolete, and problem finished goods. Monitors the consistency of production using SQC, SPC, or other appropriate techniques. Strong communicator with top-notch presentation skills who can develop and provide training to production personnel on matters concerning formulation, materials handling, processing, and quality procedures. Committed to the Company's safety and quality programs. Take an active role in hazard recognition and injury prevention by following all safety rules & regulations. Follow all environmental rules and regulations to ensure hazardous materials and waste are managed in an environmentally responsible manner. Leadership role in effort to recertify and reclaim Non-Conforming material. Works in coordination with QC and R&D to isolate, test and recertify Non-Conforming material that can be repackaged and sold. Perform additional duties as assigned. Commit to the Company's safety and quality programs.
Who We Are:
Carboline is a St. Louis-based coatings manufacturer with a global reach. The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world. Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions. Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace. Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online!....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Field Technical Representative ensures proper application of Tremco CPG products in accordance with all company and industry guidelines by providing on-site application and problem resolution.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Provide independent support for primary territory product lines. Recommend products and solutions outside of primary product lines with occasional direction. Provide site support by performing general and complex product applications. Perform substrate analysis using specialty equipment. Keep up-to-date technically on practical procedures, specialized techniques to apply new knowledge within the field. Provide field support by collecting data for project or product specific testing and interpreting results. Recommend application policies within technical literature. Coordinate 3rd party testing certification/approvals Provide live and/or web-based training for internal staff and/or external customers. Create instructional hands-on demonstrations in a classroom, distributor locations, or job site settings showing application of products. Exercise clear and confident communication of product lines and construction practices during presentation delivery. Use relevant information and individual judgment to determine whether designs or applications comply with local codes, industry standards, and regulations.
EDUCATION:
Bachelor's Degree in Science, Engineering, Construction, or similar preferred. and 2-4 years of construction or industry experience OR Minimum High School Diploma or GED with 5 years of construction or industry experience
EXPERIENCE: Minimum 2 years of related experience and/or training with the application of EIFS / Plastering Metal Panels experience is a plus Active listening and attention to detail Building and construction knowledge of materials, methods, and the tools involved in the construction or restoration of buildings or other structures Knowledge of product application Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models. Knowledge of chemical composition, structure, and properties of substances and of the chemical processes and transformations they undergo. This includes chemistry of current and future products and systems. Customer Service skills, including needs assessments and evaluation of customer satisfaction.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:. Excellent written and verbal communication skills Effective team player Proficient in Microsoft Office (Word, Excel, Outlook) Proven ability to understand, use, and manage your own emotions in positive ways to relieve stress, communicate effectively, empathize with others, overcome challenges and diffuse conflict. Demonstrates self-awareness and emotional self-control through adaptability, achievement orientation, and a positive outlook. Accepts and utilizes feedback effectively. Reads an audience and adjust style and approach accordingly. Strong presentations skills Excellent interpersonal and organizational skills
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally starts at $80K and goes up based on experience. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online!....Read more...
JOB DESCRIPTION
The Continuous Improvement Leader will lead continuous improvement efforts at the manufacturing plant level. They will work with plant management and personnel to maintain and improve the MS168 Continuous Improvement program. They will also work with the manufacturing plants and various corporate functions to determine where the most significant areas of improvement exist. Complete Six Sigma projects and provide support for plant level Six Sigma Projects. In addition, they will organize and execute focused Improvement Teams (like Kaizen Events).
Responsibilities
Implement, develop, and sustain MS168 Continuous Improvement Program. (Including Conducting Semi-Annual Audits) Complete Six Sigma projects and provide support for plant level Six Sigma projects. Work with the manufacturing plants and various corporate functions to determine where the most significant areas of improvement exist and develop projects from those opportunities. Organize and execute and track progress of Focused Improvement Teams Provide a Supportive Project Management Office including MPST & Monthly Savings tracking and reporting. Provide Training of Lean Manufacturing Principals and Six Sigma Tools to Plant and Corporate Associates Track Company Key Performance Indicators and develop action plans for identified areas of opportunity.
Requirements
5 years of experience in the manufacturing industry. 50% of the role is on floor and 50% in office. Should be willing to work with hourly associates and staff directly. Should be willing to work on the floor, roll up their sleeves and be a part of the team. Engineering or Chemistry degree is preferred but not mandatory with good significant manufacturing experience, use of lean principles in daily work. Six Sigma Black Beltpreferred. Sealant, Adhesive, Coating or Paint industry experience preferred. Able to travel 50%. Technical Expertise: Strong root cause analysis skills. Experience with processes such as TapRooT, Kepner Tregoe or equivalent is preferable. Demonstrated use of analytical analysis: statistical process control, process capability analysis, correlation, ANOVA, DOE preferable. Proficiency in Microsoft Office (Word, Excel and PowerPoint). Preferable proficiency in ERP Systems (SAP, Business Objects, etc.) and Statistical Analysis Software (Minitab, etc.) Knowledge of and demonstrated use of Lean Manufacturing tools. Leadership Skills: Must be self-motivated. Ability to motivate others. Ability to endorse and practice teamwork. Project Management Skills Project management experience required. Must be organized and committed to meeting deadlines. Possesses the skill to lead multiple improvement projects at the same time. Communication Skills: Able to speak, listen, and write well. Effective presenter, facilitator, and trainer. Proficiency in creating effective reports.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products. DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores. DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers. Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online!....Read more...
JOB DESCRIPTION
Position Summary:
Carboline is seeking a Technician at our Research Facility in St. Louis, MO. This person will assist the Research and Development laboratory group in developing, modifying and evaluating corrosion resistant protective coatings, linings, fireproofing, etc. The ideal candidate will be able to perform routine lab projects, do quality control testing, grade test panels, perform paint calculations and maintain lab book notes under the guidance of a supervisor.
Requirements:
High School Diploma or equivalent, 1-year college Chemistry or 1-3 years Lab experience.
Physical Requirements:
Lifting up to 50 pounds; exposure to chemicals including but not limited to: Amines, Polyamides, Isocyanates, Epoxies, Alkyds, Acrylics, and certain inorganic compounds. Personal protective equipment would be utilized. Must pass annual respirator medical evaluation and pulmonary function test as required by OSHA.
Essential Functions:
Use laboratory instruments and equipment and follow established testing procedures. Enter organized, neat, and accurate entries into laboratory notebooks. Grade test panels according to established procedures. Gather information or data in reference to trouble reports. Be familiar with routine laboratory computer functions such as report writing, formula calculations, graphics programs and inventory searching, specific for individual laboratory areas. Write project reports in cooperation with supervisor. Be familiar with the location, use and understand Material Safety Data Sheets with respect to raw materials and finished goods. Understand and comply with safety procedures and practices in effect. Learn how to apply coatings by spray, roller and brush. Possess interpersonal skills necessary to interface, in a positive manner, with peers, supervisors, and other departments. Be able to manufacture, and evaluate quality control tests of, lab scale batches of paint according to prescribed formulas. Additional duties and responsibilities as specified by supervisors. Take an active role in hazard recognition and injury prevention by following all safety rules & regulations and immediately reporting all injuries and incidents to your supervisor. Follow all environmental rules and regulations to ensure hazardous materials and waste are managed in an environmentally responsible manner. Receives annual training in RCRA Hazardous Waste and Carboline's Contingency Plan and will adhere to this training while performing their job. Committed to the Company's safety and quality programs.
Who We Are:
Carboline is a St. Louis-based coatings manufacturer with a global reach. The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world. Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions. Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace. Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online!....Read more...
JOB DESCRIPTION
Position Summary: Carboline is seeking a Director of RD&I, located atour Research Facility in St. Louis, MO. This person will manage and supervise all Carboline North American product development, product line maintenance, and appropriate laboratory services, manufacturing, marketing and sales support. Coordinate with and support global product development and product maintenance.
Minimum Requirements:
Bachelors degree in chemistry or related field, minimum 10 years R&D experience, minimum 5 years Supervisory or Management experience.
Physical Requirements:
This position requires minimal physical activity but does require computer usage for an extended period of time - up to 8 hours in a day. Some exposure to chemicals including but not limited to: Amines, Polyamides, Isocyanates, Epoxies, Alkyds, Acrylics, and certain inorganic compounds No unusual lifting or exertion requirements are associated with this position. Travel Requirement: 5-10%
Essential Functions:
Supervises the R&D Segment Technical Directors Participate in Stage gate process for product development Drives product development efficiency Directs and manages North American R&D organization to achieve overall Laboratory goals and objectives, both short and long term Prepares and controls overall Laboratory operating costs, capital budget, and testing expenses Develops and communicates overall Laboratory project progress on a monthly basis Maintains accuracy and integrity of lab results to assure all product data files, data sheets, testing info, etc., is accurate Coordinates or directs overall Laboratory program for technical training, management training, and employee development Manages and supervises the short and long-term product development process from an R&D perspective. Reviews product development information given by the Technical Staff and approved the technical release of Developmental Products Coordinates overall outside Research & Development programs Works with Operations, Sales, and Marketing to make sure products can be commercialized and products meet customer expectations Supervises and maintains proper Quality Control. Process to maintain product integrity and product certification (nuclear) Develop Carboline Technical Image through participation in outside societies such as AMPP, ASTM, etc. Take an active role in hazard recognition and injury prevention by following all safety rules & regulations Perform additional duties as assigned Commit to the Company's safety and quality programs.
Who We Are:
Carboline is a St. Louis-based coatings manufacturer with a global reach. The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world. Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer: We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions. Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace. Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best" Apply for this ad Online!....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Field Technical Representative ensures proper application of Tremco CPG products in accordance with all company and industry guidelines by providing on-site application and problem resolution.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Provide independent support for primary territory product lines. Recommend products and solutions outside of primary product lines with occasional direction. Provide site support by performing general and complex product applications. Perform substrate analysis using specialty equipment. Keep up-to-date technically on practical procedures, specialized techniques to apply new knowledge within the field. Provide field support by collecting data for project or product specific testing and interpreting results. Recommend application policies within technical literature. Coordinate 3rd party testing certification/approvals Provide live and/or web-based training for internal staff and/or external customers. Create instructional hands-on demonstrations in a classroom, distributor locations, or job site settings showing application of products. Exercise clear and confident communication of product lines and construction practices during presentation delivery. Use relevant information and individual judgment to determine whether designs or applications comply with local codes, industry standards, and regulations.
EDUCATION:
Bachelor's Degree in Science, Engineering, Construction, or similar preferred. and 2-4 years of construction or industry experience OR Minimum High School Diploma or GED with 5 years of construction or industry experience
EXPERIENCE: Two to four years of related experience and/or training Active listening and attention to detail Building and construction knowledge of materials, methods, and the tools involved in the construction or restoration of buildings or other structures Knowledge of product application Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models. Knowledge of chemical composition, structure, and properties of substances and of the chemical processes and transformations they undergo. This includes chemistry of current and future products and systems. Customer Service skills, including needs assessments and evaluation of customer satisfaction.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:. Excellent written and verbal communication skills Effective team player Proficient in Microsoft Office (Word, Excel, Outlook) Proven ability to understand, use, and manage your own emotions in positive ways to relieve stress, communicate effectively, empathize with others, overcome challenges and diffuse conflict. Demonstrates self-awareness and emotional self-control through adaptability, achievement orientation, and a positive outlook. Accepts and utilizes feedback effectively. Reads an audience and adjust style and approach accordingly. Strong presentations skills Excellent interpersonal and organizational skills
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally starts at $80K and goes up based on experience. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online!....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Field Technical Representative ensures proper application of Tremco CPG products in accordance with all company and industry guidelines by providing on-site application and problem resolution.
This position is for the Nudura Business Unit
Nudura is the world's leading brand of Insulated Concrete Forms (ICFs) for sustainable and durable exterior wall construction. Compared to traditional wood-framing, Nudura ICFs create the most energy-efficient and disaster-resilient residential and commercial buildings, including schools, hospitals, safe rooms and more.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Provide independent support for primary territory product lines. Recommend products and solutions outside of primary product lines with occasional direction. Provide site support by performing general and complex product applications. Perform substrate analysis using specialty equipment. Keep up-to-date technically on practical procedures, specialized techniques to apply new knowledge within the field. Provide field support by collecting data for project or product specific testing and interpreting results. Recommend application policies within technical literature. Coordinate 3rd party testing certification/approvals Provide live and/or web-based training for internal staff and/or external customers. Create instructional hands-on demonstrations in a classroom, distributor locations, or job site settings showing application of products. Exercise clear and confident communication of product lines and construction practices during presentation delivery. Use relevant information and individual judgment to determine whether designs or applications comply with local codes, industry standards, and regulations.
EDUCATION:
Bachelor's Degree in Science, Engineering, Construction, or similar preferred. and 2-4 years of construction or industry experience OR Minimum High School Diploma or GED with 5 years of construction or industry experience
EXPERIENCE: Two to four years of related experience and/or training ICF, Insulated Concrete Form or concrete block required. Active listening and attention to detail Building and construction knowledge of materials, methods, and the tools involved in the construction or restoration of buildings or other structures Knowledge of product application Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models. Knowledge of chemical composition, structure, and properties of substances and of the chemical processes and transformations they undergo. This includes chemistry of current and future products and systems. Customer Service skills, including needs assessments and evaluation of customer satisfaction.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:. Excellent written and verbal communication skills Effective team player Proficient in Microsoft Office (Word, Excel, Outlook) Proven ability to understand, use, and manage your own emotions in positive ways to relieve stress, communicate effectively, empathize with others, overcome challenges and diffuse conflict. Demonstrates self-awareness and emotional self-control through adaptability, achievement orientation, and a positive outlook. Accepts and utilizes feedback effectively. Reads an audience and adjust style and approach accordingly. Strong presentations skills Excellent interpersonal and organizational skills
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally starts at $80K and goes up based on experience. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online!....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The EHS manager is accountable for the development and implementation of programs in the Environmental, Health, Safety and Security areas of manufacturing.
TREMCO'S EXPECTATIONS FOR ALL LEADERS:
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage. Applies the company's policies and adheres to processes to ensure compliance and organizational best practices. Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility such as hiring and promotion decisions. Effectively and efficiently onboards new employees. Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation. Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained. Constructs succession plans to ensure sustainability and continuity of area of responsibility.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Investigate and document adverse effects of product use on humans and the environment, for both personal and commercial applications. Communicate product usage standards to ensure safety and mitigate risks, ensuring understanding among all stakeholders. Lead and implement regulatory compliance programs in occupational health, safety, hazardous materials, environmental management, and materials transportation. Interpret regulations, develop compliant programs, and provide training across North America, focusing on legislative compliance and organizational appropriateness. Conduct safety audits, manage Environmental, Health, & Safety (EH&S) compliance statistics, and recommend annual safety program updates. Act as the primary contact with regulatory bodies, provide litigation support, and potentially serve as an expert witness. Maintain and update knowledge on EH&S regulations, particularly in hazardous materials management across various jurisdictions. Research and advise on best practices in chemical manufacturing, distribution, disposal, policy gaps, and program improvements. Prepare for legislative changes with proactive program options and contingency plans, focusing on chemical products and regulatory updates. Serve as a key resource on occupational health, safety, and environmental management policies and standards. Collaborate with Human Resources in workplace injury case management and return-to-work programs. Lead the development and implementation of EH&S compliance codes and training programs, identifying and correcting non-compliant processes. Ensure employee training and awareness in EH&S procedures, analyzing financial implications of program and regulatory changes. Establish regulatory guidelines in chemical hazard identification, safety risk assessment, and conduct ongoing compliance audits. Provide guidance to ensure operational plans are in compliance with EH&S requirements, and act as an advisory resource on regulatory compliance and best practices to the management team.
EDUCATION REQUIREMENT: 4 year College or University degree in Natural Sciences (Chemistry, Engineering, Environmental Sciences, or Safety Sciences).
EXPERIENCE REQUIREMENT:
4+ years' experienceleading and contributing to compliance and regulatory policy and program development in a materials processing environment. Formal training in occupational health and safety. Process Safety Management (PSM) and Class 1 Division 1 (C1D1) are highly preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Certified Safety Professional preferred. Ability to travel across North America approximately 10%. Broad understanding of regulatory compliance requirements, risk assessment and mitigation programs in multiple (particularly North American) jurisdictions. Ability to inspire others to commit to and achieve EHS&S program goals and performance measures in a production environment with varying levels of literacy and educational background. Ability to develop a business case for new EHS program development/program modification. Ability to manage program administration requirements across multiple, disparate (production, distribution, warehousing, sales, and marketing) divisions.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 25 lbs.
BENEFITS AND COMPENSATION:
The base range for this position is $87,000. to 110,000. plus a 15% bonus opportunity.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
