Design Manager - Immediate Start - Up to £60,000 per annum - Liverpool. Merseyside.
Design Manager. Our client, an M&E subcontractor who operate throughout the country, are looking for a M&E design manager to join their growing team based in Liverpool.
As a design manager, duties will include:
Managing appointed technical resources within and outside the organisation.
Planning and delivering all design and advisory to internal and external stakeholders
Setting and Driving departmental KPI's
The ideal candidate will have:
Competency with MS programmes, CAD, BIM, and other related design software
Strong knowledge of the building services industry, including alternative energy
Recognised Degree in Mechanical or Electrical Engineering, ideally with membership to CIBSE
Benefits include, but are not limited to:
Company Van
33 days holiday
Employee Bonus scheme
Healthcare cashback plan
Gym & Retail discounts
Life Assurance Benefits
If you are an experienced design manager, then we would love to hear from you. Please apply below or send your latest CV to bailey.w mcgconstruction.co.uk....Read more...
RF Analog and Mixed-Signal IC Design Engineer required to help deliver high performance RF, analog, and mixed signal ASICs from specification through to GDSII tape out and production silicon.
Experience
Degree in Electronic Engineering also an MSc or PhD in Analog Mixed Signal IC Design preferred.
2+ years of experience in RFIC analog mixed signal schematic design and simulation in CMOS technologies.
Analog mixed-signal circuit design, including references, regulators, power management, data converters, filters, amplifiers, and high-speed serial interfaces.
IC layout and physical implementation.
RF, Analog and Mixed Signal IC evaluation and test.
CAD tools Cadence Virtuoso, Mentor Calibre, Linux, Version Control.
Analog and mixed system modelling using SystemVerilog, Matlab, Octave or similar.
Knowledge of DSP, Digital RTL, RF/AMS IP, and production test advantageous.
Role
Design and simulate high accuracy analog mixed-signal IC blocks amplifiers, DAC/ADC, regulators, filters, PLLs, DC-DC converters, mixers.
RF and analog mixed-signal design flow, from specification to silicon validation.
IC design peer reviews.
Top level verification of analog mixed signal IPs, ICs, and SoCs.
Oversee physical implementation and post layout simulation.
Silicon evaluation and production testing for analog and mixed-signal blocks.
Collaborate with multi-disciplinary teams, including digital, software, and test engineers.....Read more...
Assist the design engineers with HVAC designs and produce CAD drawings
Study building services design at one of the countrys top faciltiies
Develope skills and education in a wide variety of exciting projects
Training:
Building Services Engineering Technician 2022 Level 2 Apprenticeship Standard
Training will involve 4 days in our Newbury office with day release to london south bank
Training Outcome:
Optional progress onto degree course
Progress into design engineer
CIBSE memebership
Employer Description:We are one of Berkshire leading design and build HVAC contractor with our privately owned offices based in NewburyWorking Hours :Monday to Friday 8.30am - 5.30pm , may include the occasional additional hours or Saturday.Skills: Communication skills,IT skills,Problem solving skills,Analytical skills,Team working,Creative,Initiative....Read more...
We are working with leading provider of industrial automation equipment manufacturer who offers a wide range of products in Science, Engineering, and Technology sectors based in Halifax West Yorkshire, We're recruiting for a Mechanical Design Engineer who can design products and solutions suitable for educational institutions, understanding market trends and latest developments in technology, having some understanding of subject matter and a capability of technical writing as required.
Mechanical Design Engineer: • Use of Solidworks • Ability to produce and maintain of BOM’s • Ability to generate costing estimates • Ability to source new components and obtaining quotes and pricing for both standard components and bespoke items • Knowledge of basic machining, sheet metal and bending processes • Knowledge and appropriate selection of common engineering metal alloys such as steels, aluminium etc plus common engineering plastics such as acrylic and ABS • Knowledge and appropriate selection of finishes for aesthetic and corrosion resistance including painting/powder coating, plating, anodising etc. • Knowledge of common place mechanical components such as bearings, couplings, gears, timing pulleys etc and their appropriate limits and fits • Knowledge and appreciation of measuring techniques for mechanical parameters such as force, torque, strain, pressure, flow rate, displacement etc • Good Theoretical Engineering background. Ability to do design calculations and understand the theories being taught with the equipment. • Be able to work with electrical and electronic engineers in the development of new products, awareness of mounting of PCB’s and electrical components such as switches, panel connectors circuit breakers etc • Be able to write technical documentation, both for internal use and as an input into customer facing documents such as product manuals and user information • Ability to perform product demonstrations both internally and externally to customers and end users • Assist in the production of technical briefs for new products
Desirable: • Knowledge of running Solidworks PDM to control CAD models and drawing issues and revisions, or alternatively someone with knowledge about how to handle data files in CAD systems
Great opportunity to be part of a leading bespoke deisgn and manufacturing business who aspire to be the leader in class globally.....Read more...
Senior Mechanical Engineer – Biotech Mechatronics – Cambridge
A spin-out Biotech company, based in Cambridge, is currently hiring several Senior Mechanical Engineers to join them and help accelerate the proof of concept, design, development, building, and testing of a novel life-saving biotech manufacturing device.
Your focus will be accelerating the proof of concept, design, development, building, and testing of the hardware of this new biotech device, collaborating with some excellent Medical Devices Physicists, Scientists, Electronics Engineers, and Design Engineers.
This role involves working on the design and development of this biotech manufacturing device, using 3D CAD. Therefore, specific CAD experience will be essential, ideally SOLIDWORKS.
We need senior-level candidates, someone who has worked on mechatronics, automation, robotics, precision devices or another complex electro-mechanical technology.
Due to the size of this company, you will be exposure to other areas of the business, including third-party meetings and attending Biotech, Medical Devices and Science conferences and trade shows. Consequently, it would be ideal if you have previously worked for a start-up/scale-up company or worked for a Medical Devices/Biotech/Scientific Design Consultancy and know what it’s like to wear multiple hats when needed. Experience in Medical Devices, Scientific or Biotech companies is not essential; we can also look at candidates from other complex sectors.
The technology you will be working on will save lives. I can provide more details once you have made an application. Most candidates I have spoken with find the work rewarding due to the impact this work will have on lives.
It is expected that you would hold a degree and a masters in a related Medical Devices, Mechanical Engineering, Design Engineering, Electronics Engineering, or another relevant scientific subject that led you into a Mechanical Engineer role.
You will also be rewarded with an excellent starting salary, enhanced pension, bonus, healthcare, other benefits, and future career development as the company grows while also working in an interesting field on a product that could help a lot of people.
As this is an exciting role, joining a start-up company at the beginning of their journey, I’m expecting a lot of interest in the role. So, if you are interested, please apply straight away or risk missing out to someone else.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery recruitment specialists, Newton Colmore, on +44 121 268 2240 or submit an application, and a member of our team at Newton Colmore will be in touch with you.....Read more...
Technical Engineer | Exciting Opportunity in Technical DesignAre you a Technical Engineer looking for a role that combines technical expertise with creative problem-solving?We are hiring on behalf of a specialist engineering company that delivers innovative and sustainable solutions for outdoor environments.If you have strong CAD skills and an interest in high-performance systems, this is a fantastic opportunity to work on unique, design-led projects across the UK.What You’ll Be Doing
Design & Development – Create detailed CAD drawings and technical plans for specialist projects.Engineering Solutions – Apply knowledge of hydraulics, fluid dynamics, and materials selection to optimise performance.Project Collaboration – Work closely with engineers, designers, and clients to bring concepts to life.Quality & Precision – Review designs, troubleshoot challenges, and ensure high technical standards.Innovation & Growth – Stay ahead of the latest engineering technologies to enhance designs and efficiency.
What You’ll Need
Proven experience as a Technical Engineer in engineering, architecture, or a related field.Proficiency in AutoCAD, SolidWorks, or similar CAD software.Strong understanding of fluid dynamics, mechanical systems, and environmental regulations.Excellent problem-solving and teamwork skills.A keen eye for design, functionality, and sustainability.
Why Join?
Work on exciting, high-profile projects that push the boundaries of engineering and design.Be part of an innovative, forward-thinking team that values expertise and creativity.Join a company that prioritises sustainability and cutting-edge engineering.
Ready to take your Technical Engineering career to the next level? Apply today!....Read more...
Technical Engineer | Exciting Opportunity in Technical DesignAre you a Technical Engineer looking for a role that combines technical expertise with creative problem-solving?We are hiring on behalf of a specialist engineering company that delivers innovative and sustainable solutions for outdoor environments.If you have strong CAD skills and an interest in high-performance systems, this is a fantastic opportunity to work on unique, design-led projects across the UK.What You’ll Be Doing
Design & Development – Create detailed CAD drawings and technical plans for specialist projects.Engineering Solutions – Apply knowledge of hydraulics, fluid dynamics, and materials selection to optimise performance.Project Collaboration – Work closely with engineers, designers, and clients to bring concepts to life.Quality & Precision – Review designs, troubleshoot challenges, and ensure high technical standards.Innovation & Growth – Stay ahead of the latest engineering technologies to enhance designs and efficiency.
What You’ll Need
Proven experience as a Technical Engineer in engineering, architecture, or a related field.Proficiency in AutoCAD, SolidWorks, or similar CAD software.Strong understanding of fluid dynamics, mechanical systems, and environmental regulations.Excellent problem-solving and teamwork skills.A keen eye for design, functionality, and sustainability.
Why Join?
Work on exciting, high-profile projects that push the boundaries of engineering and design.Be part of an innovative, forward-thinking team that values expertise and creativity.Join a company that prioritises sustainability and cutting-edge engineering.
Ready to take your Technical Engineering career to the next level? Apply today!....Read more...
You will work on HV and LV power distribution systems, delivering innovative solutions for industrial and commercial applications.
Why Join Us?
Work on high-impact switchgear projects (10kV+)
Collaborate with a skilled team on complex electrical designs
Competitive salary, career growth, and technical development opportunities
Your Role:
Design and develop electrical switchgear solutions using AutoCAD or similar CAD software
Create wiring diagrams, schematics, and layout drawings for HV and LV systems
Provide technical support to the Test Department and oversee project documentation
Work on protection relays, power circuit monitoring, and circuit breakers
What We are Looking For:
Two years of experience in electrical design for switchgear systems
Strong knowledge of HV and LV power distribution and circuit breakers
Proficiency in AutoCAD (or equivalent) for schematic and layout designs
Ability to manage multiple projects in a fast-paced environment....Read more...
You will work on HV and LV power distribution systems, delivering innovative solutions for industrial and commercial applications.
Why Join Us?
Work on high-impact switchgear projects (10kV+)
Collaborate with a skilled team on complex electrical designs
Competitive salary, career growth, and technical development opportunities
Your Role:
Design and develop electrical switchgear solutions using AutoCAD or similar CAD software
Create wiring diagrams, schematics, and layout drawings for HV and LV systems
Provide technical support to the Test Department and oversee project documentation
Work on protection relays, power circuit monitoring, and circuit breakers
What We are Looking For:
Two years of experience in electrical design for switchgear systems
Strong knowledge of HV and LV power distribution and circuit breakers
Proficiency in AutoCAD (or equivalent) for schematic and layout designs
Ability to manage multiple projects in a fast-paced environment....Read more...
Working under direction of senior designer engineer, tasks to include;
System layout, with 3D CAD tools
Detailing GA drawings for various applications
Detailing Project specific hardware
Building Bill of Materials (B.O.M.s)
Maintaining Building Information Model (B.I.M.)
Site Visits & Surveys
Liaising with internal departments
Involved in internal project meetings or reviews
Use of multiple CAD / other systems
AutoCAD
Solidworks
Tekla
Navisworks
RECAP
Training:Trainining will take place at Rugby College (part of Warwickshire College Group). You will attend Rugby College one day a week throughout the apprenticeship.Training Outcome:Working towards fully independent competent Design Engineer, leading design of own projects.Employer Description:• Our Organisation Grouping in product divisions to ensure high competency in every field.
• Specialisation of each of the six German plants in one subject ensuring efficiency and a continuous improvement in process.
• Uniform distribution/marketing organisations to guarantee that every customer can rely on one person in charge dealing with the whole project and who will identify himself with the demands of this customer.
• Uniform application of service methods with technical support where the product competency lies.
• By inter-linking overall team work keeping the competency on an up-to-date level (information- and communication technology, control technology, data management, service support methods, complete project planning and market control, innovation management, production methods).Working Hours :Monday– Friday: 08:30- 17:00 PMSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Team working,Creative,Initiative,Adaptable,Communicate at all levels,Confidence....Read more...
What you’ll do at work Machining - mechanical principles leading to advance CNC machining centres and CAD/CAM Moulding - plastic and rubber injection moulding, tool design and processes Plating - advanced electroplating processes Designing - 3D cad, product and tool design Manufacturing Engineering - assembly tooling and production processes and quality control processes Test House - testing of new products to meet specification qualification Toolroom - mechanical principles leading to advance CNC machining centres and CAD/CAM Production - product familiarisation and assembly method
When in reality its more:
Setting and operating CNC lathes to produce small to medium size batches of work in a timely manner
Inspecting work to Engineering drawings using various measuring equipment and reporting any quality defects to the machine shop supervisor
Daily, weekly and monthly maintenance checks on machines, including maintaining good housekeeping standards, 5S requirements and reporting any issues promptly to supervision
Optimising efficiencies through reduced set-up and cycle times, plus tool life monitoring
De-burring, cleaning, final inspection, and completion of all traceability documentation
Training:Engineering and Manufacturing Support TechnicianLevel 3 Apprenticeship Standard:
Year 1 will be spent at IPS International training centre in Medway City Estate, Rochester
Year 2 will be with the employer, with one day release at IPS International
Years 3 and 4 will be full time with the employer
Training Outcome:
Upon successful completion of the apprenticeship, there will be the potential to advance within the business into any areas described
Advance to level 4 qualification for those wishing to qualify as an Engineer
Employer Description:Amphenol LTD is a manufacturing site within the family of companies that forms the Amphenol Corporation, a global interconnect specialist generating in excess of $13 billion yearly revenue with over 90,000 employees. Employing around 300 people at the site in Whitstable, Kent, Amphenol LTD offers a full design and manufacturing service for a large range of connectors and interconnect solutions, including cable assembly, over-moulding and electronic packaging. In the age of globalisation, Amphenol LTD is proud to have retained full end-to-end manufacturing capability for its products in the UK, whilst having opened access to low cost manufacturing sites around the world to complement its offering to customers globally. Accredited to AS9100, an innovative and a leading edge manufacturer of both connectors and interconnect systems for applications within the Military and Aerospace markets, Amphenol LTD is dedicated to providing customers with the latest technology to meet the needs of interconnection in a variety of challenging
applications. With engineering and customer service teams based out of our manufacturing site we are the local point of contact for our UK customers to access the full Amphenol product portfolio and for our global customers to access the specialist products and services that Amphenol LTD can provide.Working Hours :Monday to Thursday 8.00am to 4.30pm and Friday 8.00am to 1.30pm.Skills: Problem solving skills,Analytical skills,Willing to learn,Methodical....Read more...
The Redline group have an exciting new opportunity for an Electrical Design Engineer, based in Loughborough, to join their team. In this role you will be responsible for leading the design and documentation of electrical wiring harnesses and other electrical work packages, using Solidworks Electrical to create electrical schematics, 3D models and manufacturing documents for wiring harnesses and cable assemblies.
Main responsibilities for the Electrical Design Engineer, based in Loughborough are:
- Generating electrical drawings and panel layouts with supporting electrical documentation (Bill of Materials, Component Lists, Cable Schedules, Terminal Rail Layouts etc)
- Ensure all electrical drawings are updated promptly throughout the lifecycle of the project and shared with all relevant departments
- Maintain a database of preferred electrical devices to ensure consistency in functional hardware from project to project
Key skills required for this Electrical Design Engineer, based in Loughborough are:
- Electrical Engineering Qualification
- In-depth knowledge of Solidworks Electrical or similar CAD package
- Experience with schematic capture and harness design
To apply for this role please email a copy of your CV to Ricky Wilcocks – Rwilcocks@redlinegroup.Com, or for more information, please call Ricky Wilcocks on 01582 878810 / 079317 88834. ....Read more...
An exciting opportunity has arisen for Civil Technician / Senior Technician to join a versatile consultancy firm. This full-time role offers excellent benefits and a competitive salary.
As a Civil Technician / Senior Technician,your role involves diverse tasks, including hands-on work in highways, drainage, infrastructure design, and offering technical support to the in-house team.
You will be responsible for:
? Conduct site appraisals and feasibility studies.
? Prepare Flood Risk Assessments and flood compensation analyses.
? Design foul and surface water drainage systems, including hydraulic modelling.
? Develop Sustainable Drainage Systems (SuDS) designs.
? Produce detailed design packages for tender and construction purposes.
? Perform CDM risk assessments and implement mitigation measures.
? Conduct Road Safety Audits (Stages 1 to 4).
? Oversee servicing and delivery design and management.
? Design highways for local authorities and private residential/commercial developments (S38/S184/S278).
? Assess utilities, negotiate impacts, and manage C3 and C4 cost estimates.
What we are looking for:
? Previously worked as a Civil Technician, Highway Technician, Drainage Technician, Civil Infrastructure Technician or in a similar role.
? Experience and background in highway construction projects and drainage design.
? Experience within a civil engineering design consultancy.
? Possess a relevant engineering / CAD qualification.
? Understanding of highway planning procedures like section 38/278 agreements, UK design standards (MfS and DMRB).
? Knowledge of drainage adoption procedures, including Sections 106/104, UK design principles, best practices, and standards such as Sewers for Adoption and the SuDS Manual.
? Ideally have skills in using software such as Civil 3D, AutoTrack, and MicroDrainage for horizontal and vertical highways and civil engineering design.
What's on offer:
? Competitive salary
? 25 days holiday
? Pension....Read more...
Medical Devices – Senior Mechanical Design Engineer – Cambridge
Due to successful growth plans, a Medical Devices organization based in Cambridge is currently seeking a Senior Mechanical Design Engineer to contribute to the development and improvement of life-saving Medical Devices.
Collaborating closely with other industry experts, such as electronics design engineers, software engineers, physicists, and other Medical Devices specialists, you will tackle some of the most complex challenges in the development of new Medical Technologies.
Ideally, you will have a background in developing new Medical Devices throughout the entire design life cycle, adhering to ISO 13485 standards. If you have not worked on Medical Devices, we will consider candidates from other highly regulated industries such as life sciences, robotics, product development, etc.
For the 3D CAD elements of your role, you will primarily use SolidWorks. Familiarity with this tool would be advantageous, but we are open to considering other 3D CAD tools if you have a proven track record of quickly acquiring new skills.
When discussing complex problems, it would be beneficial if the Medical Devices you have worked on have involved fluidics, mechanism design, thermal issues, FEA, or other intricate applications. We do not expect you to have experience in all of these areas; they are just a few examples of the challenges you may encounter.
This company is experiencing growth but remains at a size where your work will significantly impact the company's success and projects. Therefore, we are seeking a team player accustomed to collaborating with diverse individuals both within and outside of the organization.
While continually facing challenges, you will advance your skills at the forefront of the sector. In addition to this, you will receive an excellent starting salary, a bonus (typically around 20%, recently even higher), BUPA healthcare, a pension plan, a generous holiday allowance, and other outstanding benefits.
Salary will be commensurate with experience, and we welcome applications from candidates with a few years of industry experience to those with over twenty years of experience. Finding the right fit is more important to us than a specific number of years of experience.
It is expected that you hold a degree in addition to any industry experience. If you also possess a PhD, it would be welcomed but is not essential.
Interviews will be conducted as soon as a suitable candidate is identified. If you are interested in exploring this role, we recommend submitting your application and CV. Please note that your CV will not be forwarded to the company until after we have discussed the role and the company in detail.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at 0121 268 2240. Alternatively, you can submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialised recruitment company operating in the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Project Coordinator
Engineering Installation Projects
Salary £30,000-£35,000
South Leicester LE18 1AD
Mon-Fri Day Shifts Office-Based Role
Early Finish Friday, 33 days holiday, Role Progression
Do you have administrative experience working within a manufacturing or construction business and are keen to take your experience to the next level? If you're looking for the next step in your career, this opportunity could be perfect for you!
Our client is a well-established engineering manufacturing business seeking a Project Coordinator to join their team. The ideal candidate will come from a construction, manufacturing or electrical/mechanical services background with some project or administration experience.
The role is 100% office-based and is commutable to South Leicester.
The Role - Project Coordinator:
The Project Coordinator oversees all Lifting Platform contracts, acting as the primary contact for customers. This role is responsible for managing design iterations from concept to installation, including BOM integration, stock management, and training for installation teams.
Key Responsibilities include:
- Customer & Contract Management: Handle contracts from order to delivery, coordinating across departments.
- Technical Support: Create CAD layout drawings and resolve installation issues.
- Logistics & Installation: Organise delivery, installation teams, and required equipment.
- Design & Development: Manage product design updates, including testing, production rollout,
- and stock considerations.
- Product Innovation: Support new model development for sales and production.
Key Candidate Requirements - Project Coordinator:
- 2 years of experience in an administrative role within an engineering or construction business
- Can read and/or make edits to 2D CAD drawings
- Has experience communicating with external customers
- Experience using Microsoft Office applications and CRM systems
- Must have access to own vehicle with a full UK driving licence
- Understanding of or interest in engineering principles.
- Ambitious to develop technical skillset
- Computer literate in office applications, particularly in using formulas in Excel.
- Good communication skills to interact with both customers and site operatives.
Salary / Package:
- Salary £30,000-£35,000 per annum
- Starting salary depends on experience
- 25 Days Holiday + Bank Holidays
- Company Pension Scheme
- 39-hour working week
- Monday Thursday: 8am-5pm, Friday: Early Finish at 1pm
- Career Growth: Successful candidates can advance to Product Manager
Interested? To apply for this Project Coordinator position, here are your two options:
1. "This is the job for me! When can I start?" - Call 0116 2545411 now and lets discuss your experience. Ask for Emma Gilmore between 7.30am - 4.30pm
2. "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know
PPDEL....Read more...
Recruit4staff are proud to be representing their client, a well-established steel fabrication company in their search for a Draughtsman to work in their leading facility in Chester.Job Role:
As a Draughtsman, you will be responsible for creating detailed general arrangement and fabrication drawing packs for various projects. You will also conduct material take-offs from construction packs, collaborate with the design team to develop bespoke steelwork designs, and ensure compliance with industry standards while delivering high-quality drawings. Communication with engineers, project managers, and other stakeholders will be key to ensuring successful project execution.Job Details:
Pay: £35,000 per annumHours of Work: Monday to Friday, 7:00 AM – 3:00 PM (37-hour week)Duration: Permanent
Essential Skills & Experience:
Proven experience in CAD drafting and steel detailing, preferably within a fabrication environment.Proficiency in CAD software (AutoCAD, AutoCAD Advance Steel, Tekla, or similar).Strong understanding of structural and architectural steel design.Excellent attention to detail and the ability to work under tight deadlines.Effective communication skills and a collaborative mindset.
Additional Information:
A supportive work environment with opportunities for professional growth.The chance to work on exciting and diverse projects within the steel fabrication industry.A standard 37-hour work week, with a focus on work-life balance.
Similar Job Titles:
Design Engineer, CAD Engineer, Draughtsman, Fabrication Draughtsman, Structural Steel DraughtsmanCommutable From:
Wrexham, Broughton, Chester, Llay, Holt, Farndon, Little StrettonFor further information about this and other Draughtsman positions, please apply now.This vacancy is being advertised on behalf of Recruit4staff (Wrexham) Limited, who are operating as a recruitment agency.....Read more...
CNC Machining & Manual Machining - Learning to operate lathes, milling machines, and grinding machines for high-precision work
CAD & Technical Drawings - Interpreting blueprints and possibly assisting in design modifications
Material Handling & Preparation - Cutting, shaping, and selecting the correct metals and alloys
Assembly & Quality Control - Ensuring manufactured parts meet specifications through inspection
Problem-Solving & Troubleshooting - Identifying issues in production and working with engineers to solve them
Safety & Maintenance - Following health and safety protocols, maintaining tools, and keeping the workspace organised
Training & Development - Attending college or in-house training sessions to improve technical knowledge
Training:Machining Technician Level 3 (A level) Apprenticeship Standard:
The apprentice will learner over the years via Cambridge Regional College and work mentor
Communication & Teamwork - Training on professional communication, working with engineers, supervisors, and customers
Time Management & Productivity - Learning how to work efficiently, prioritise tasks, and meet deadlines
Problem - Solving & Continuous Improvement - Training on Lean Manufacturing and Six Sigma
Training Outcome:
CAD / CAM Programmer - Specialising in designing components and programming CNC machines
Quality Control Inspector - Focusing on precision measurement and ensuring high-quality manufacturing
Maintenance Engineer - Working on machine servicing, breakdowns, and automation systems
Technical Trainer / Lecturer - Teaching future apprentices in colleges or industry training centres
Self-Employed / Business Owner - Starting your own precision engineering workshop or CNC machining business
Employer Description:Spanning four sites across Cambridgeshire & Bedfordshire, PCML are one of the fastest growing precision engineering and manufacturing companies in the UK. Specialising in the design, manufacture and assembly of precision engineered parts, components and devices. The team are all highly skilled, technically focused and experienced engineers with a shared passion for CNC Machining.
From start-ups and consultants to large, global giants in the technology, pharmaceutical, biotech and medical device industries: our customers are increasingly looking for dynamic and flexible supply chains with rapid turnaround and customised specifications.
PCML is well positioned to deliver this - leveraging our technology, IT operating platform and automated processes to provide the manufacturing agility that clients require along with rapid turnaround, design and technical input and market leading engineering capabilities.Working Hours :Monday - Thursday, 07:30 - 16:15 and Friday, 07:30 - 15:00Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
Roles:
Measuring up and producing hand-drawn sketches from existing machine modifications (on the shop floor) so that you can model them later.
Creating and modifying 3D solid models using SolidWorks.
Producing Drawings for the shop floor and suppliers that meet quality and technical standards (BS8888).
Creating and updating Part Numbers in line with Company Procedures (ISO9001).
Opportunity to engage and contribute to design improvements on existing and new products.
Learning how to create BOMS, SOPs and instruction manuals and work with Legislation.
Assist with Testing.
Skills required:
Some experience with 3D CAD.
Basic computer literacy – Word, Excel and Outlook.
Record keeping.
Problem Solving.
Keen eye for detail.
Ability to change and make change.
Methodical approach.
Good organisational skills to work to deadlines.
Developing communication skills with other departments.
Ability to prioritise work based on changing workloads.
Ability to work alone, and in conjunction with other employees as required.
Enthusiastic and self-motivated and enjoy the challenge.
Ability to learn, analyse, and understand business and technical processes.
Ultimately, a willingness to learn new skills is required as full training will be given to suitable candidates.
Training:Training will be at North Lindsey College where you will access a wide range of facilities on offer
Day release.
You will undertake the Engineering Design Technician Level 3 Apprenticeship Standard (https://www.instituteforapprenticeships.org/apprenticeship-standards/st0164-v1-2).
You will undertake Functional Skills for English and/or Maths if needed.
You will undertake both on and off-the-job training by a team of industry qualified professionals to give you the best skills, knowledge and experience that will help you become a CAD Designer/Operator of the future!
Training Outcome:
Successful completion of the apprenticeship could lead to a higher-level apprenticeship or full-time employment for the right candidate.
Several opportunities for career progression on completion.
Employer Description:Vac-Ex Ltd produces equipment for the safe excavation in and around live buried utilities (electric, gas, water etc). We are a busy, expanding, market leading, UK-based, SME Design/Manufacture/Fabrication/Sales & Exports organisation.Working Hours :Monday to Friday, between 8am to 4:30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
Job Title: Mould Design Engineer Location: Hertford, Hertfordshire Salary: Up to £45,000 per annum (Negotiable depending on experience) Benefits:25 days holiday plus bank holidaysPension schemeParking facilitiesSick pay Company Profile Established for over 5 decades with an excellent reputation specialising in the manufacturing of quality mould tools for various industry sectors both in the UK and overseas are currently recruiting for a skilled and experienced Product and Mould Designer due to continued growth, expansion, and reinvestment. Job Profile As a Mould Designer, you will be responsible for creating 3D models and 2D drawings of moulds primarily used in the packaging industry. You will also be involved in some product design tasks. This is a key role within our design team. Duties:Designing and modeling 3D moulds for the packaging industryProducing 2D technical drawings of mouldsAssisting in product design as requiredCollaborating with the team to meet project deadlines and client specifications Skills & Attributes:Experience with Autodesk PowerShape is a significant advantage; familiarity with other CAD packages such as SolidWorks, AutoCAD, or similar is also highly valued.Proven experience as a CAD designer with the ability to switch between different design tasksStrong skills in 3D modelling and 2D technical drawingGood communication and teamwork skillsAbility to manage priorities and meet deadlines in a fast-paced environmentWe are looking for a friendly, self-motivated individual who is capable of managing priorities and meeting deadlines. Strong communication skills are essential to fit in with our dynamic and supportive team. Qualifications / Certificates:Degree or apprenticeship-trained in a relevant field Hours of Work:39 hrs/weekMonday to Thursday: 8:00 am to 4:30 pmFriday: 8:00 am to 3:30 pm30-minute lunch break each dayOvertime paid at 1.5x hourly rate after 39 hrs/week To apply, please send a copy of your CV in reply to this job description.Bolt-On Personnel and our clients are equal opportunity employers who seek to recruit and appoint the best available person for a job regardless of marital/civil partnership status, sex, age, religion, belief, race, nationality and ethnic or national origin, colour, sexual orientation or disability. Bolt-On Personnel and our clients apply all relevant Data Protection laws when processing your Personal Data. If you choose to apply to this opportunity and share your CV or other personal information with Bolt-On Personnel, these details will be held by us in accordance with our privacy policy used by our recruitment team to contact you regarding this or other relevant opportunities at Bolt-On Personnel.....Read more...
Mechanical Design Engineer
Based in Medway
circa £40,000pa
Flexible working available
KHR is delighted to be working with a fantastic water systems specialist who is currently looking for a Design Engineer. If you are an expert in Mechanical Design who enjoys combining technology, creativity and sustainability - then this is the role for you!
Role Overview:
As a Mechanical Design Engineer, you will be responsible for designing, building and managing unique water installations. Your technical knowledge and creative problem-solving skills will be instrumental in transforming client visions into reality while ensuring the highest standards of quality and efficiency.
Candidate Profile:
- Background in design engineering
- Proficiency in using CAD software
- Great understanding of mechanics and hydraulics
- Effective communication and leadership skills
This is a great opportunity with a fantastic company. So, why not apply today?
At KHR we take care to ensure that you are represented as well as possible so it is worth checking your CV for layout, spelling and grammar as well as making sure it is up to date before you submit. If you feel you need to highlight particular qualifications, skills or relevant experience with regards to a specific role then please add a cover letter or a preface page. This does not need to be formatted in the same manner. In addition, if your CV is heavy with graphics etc, please could you also submit a "clean" copy in Word. Thank you.
KH Recruitment Ltd is acting as an Employment Agency in relation to this vacancy. KHR - Recruitment Specialists is a trading name of KH Recruitment Ltd Keep in touch with us online for job alerts, industry updates and market...
....Read more...
A unique opportunity has arisen for a Senior Mechanical Design Engineer to join the world leading Product Design Consultancy based in Warwickshire.
Working with customers across a variety of industries their globally operating development teams have helped to create some of the market-leading products within the medical, scientific, consumer and transport markets.
Due to continued growth, they are seeking a Senior Mechanical Design Engineer to be based from their Warwickshire campus where you will be instrumental in the full concept product development process of a range of complex technology products. Working closely with customers you will be significant in the development of new designs, evaluation of new technologies and guidance of projects across multiple disciplines. The role will suit a creative candidate with good problem-solving skills, and someone that is able to generate innovative solutions to design problems.
Key skills and experience for Senior Mechanical Design Engineer:
BENG or CENG qualified with a 1st or a 2:1
Experience of product development from concept to volume manufacturing
Experience of 3D CAD packages
Ideally worked within a relevant industry i.e. Medical, Automotive, FMCG, Industrial, Consumer electronics
Excellent verbal and written communication skills
This is a great opportunity to work with a global recognised company who work with some of the world’s leading technology based organisations. A business that offers their employees the freedom to be creative, work across a variety of industries and be able to create career development and personal growth.
To apply for Senior Mechanical Design Engineer based in Warwickshire, please send your cv to ntyler@redlinegroup.Com, or for more information contact Natalie Tyler on 01582 878808 or 07751240250.....Read more...
Position: EC&I Engineer (Subsea Equipment)
Job ID: 264/24
Location: Newcastle
Rate/Salary: £45,000 to £60,000 DOE
Type: Permanent
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Shipping & Energy and Aerospace sectors. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
The below job description will outline this position of: EC&I Engineer (Subsea Equipment)
Typically, this person will be responsible for designing and developing offshore and subsea equipment, participating in every phase of the project life cycle. Their involvement spans from understanding client requirements through design, development, installation, testing, customer acceptance, documentation, training, and occasionally providing post-sales support. Additionally, they offer support to other business functions, including Sales, Project Management, Procurement, Production, Commissioning, and Documentation.
HSB Technical’s client is a very established and well-regarded business entity.
Duties and responsibilities of the EC&I Engineer:
Design of offshore and subsea equipment
Design of distributed control systems (PLC, SCADA)
Design of network and communications systems including RS485, MODBUS and Ethernet protocols
Design of low voltage and extra low voltage control circuits
Measurement systems & instrumentation
Selection and integration of subsea surveillance, vision and lighting systems
Using CAD to design and produce top level system diagrams, interconnecting wiring drawings, and detailed electrical, control & instrumentation schematics
Qualifications and requirement for the EC&I Engineer:
Degree in Electrical Engineering or similar
Practical experience/background in the subsea industry
Experience of machine control systems / automation
Autodesk AutoCAD
Autodesk Inventor
This vacancy is being advertised by HSB Technical who have been appointed to act as the recruitment consultancy for this role.....Read more...
An exciting opportunity has arisen for a Test Development Engineer to join this global leader specialising in high-tech electronic technologies based in Portsmouth, Hampshire.
Due to continued growth they are seeking a Test Development Engineer to join their diverse engineering teams and be responsible for analysing customer requirements to develop Analogue, Digital and Mixed Signal Test Platforms, including hardware and software design.
Key skills experience for Test Development Engineer:
Degree qualified in Electronics Engineering or related discipline
Experience of developing Test solutions for Analogue and Mixed Signal components
Experience with Pascal, C++, C#, Visual basic hands-on programming
Credence D0, ASLx or COHU experience ideal
PCB Design – Altium, OrCad, EAGLE CAD
This is a unique chance to join a forward thinking company in the exciting technology market who can offer the opportunity of career progression and personal development.
To apply for Test Development Engineer, based in Portsmouth, please send your CV and covering letter to ltemple@redlinegroup,com, or for more information contact Lewis Temple on 01582878820.....Read more...
As an Apprentice Tooling Engineer your duties will include:
Attend and participate in all training provided
Complete coursework and assessments for apprenticeship qualification
Maintain a detailed training logbook and portfolio of work
Follow instructions from mentors and the management team
Assist toolmakers in design and manufacturing tasks
Learn to interpret engineering drawings, CAD/CAM, and precision machinery
Training:Machining Technician Level 3 apprenticeship ST1305.
All the Skills, Knowledge & Behaviours associated with this apprenticeship. Successful candidates will be required to attend COWA Wisbech for training one day a week until completion.
You will embark on an apprenticeship to become a skilled Toolmaker Engineer, focusing on the design, manufacture, and maintenance of precision tooling. Your journey will involve active participation in training, completing coursework, and record-keeping in a training logbook. You will learn to interpret engineering drawings, operate precision machinery such as lathes, milling machines, grinders, and CNC machines. You will also utilize CAD/CAM software, while assisting experienced toolmakers and following guidance from mentors and managers. You will proactively seek opportunities to expand your knowledge and contribute to the efficiency of manufacturing processes.Training Outcome:For the apprentice to progress into a Toolmaker Engineer position at Bespak.Employer Description:Bespak in King’s Lynn are a large manufacturing site with 900 staff. We are the market leader in the industry and have 60 years of experience in the development and commercial supply of pressurised Metered Dose Asthma Inhalers (pMDIs), Metering Valves and Actuators. We make over 1 million devices a day on the King’s Lynn site and every second of the day 1000 people across the world are using one of our devices. We have multiple manufacturing areas on the King’s Lynn site and have over 175 injection moulding machines that create the components that are assembled using our automated systems.Working Hours :Monday to Friday
8am to 4pm
1 day a week (Wednesdays) will be at COWA Wisbech PE13 2JE.Skills: Communication skills,Attention to detail,Team working,Good manual dexterity,Good handling skills,Keen interest in Engineering,Able to follow instructions,Strong work ethic,Strong work commitment....Read more...
The Redline group have an exciting new opportunity to work with an excellent company, based in North Wales, for an for an experienced Mechanical Design Engineer - Pneumatic/Hydraulic, to focus on mechanical system design and development of new imaging and sighting systems for Aerospace & Defence and Life Science sectors.
Key responsibilities for the Mechanical Design Engineer - Pneumatic/Hydraulic -
- Work on mechanical engineering input from concept through testing and manufacture
- Assist with requirements capture and specification definition, sensitivity analysis, reliability analysis as required
- Produce designs of mechanical assemblies, opto-mechanical sub-assemblies and mechanisms for electro optical systems
- Prepare presentations and reports for both formal and informal design reviews
- Work with Business Development and Engineering teams to support new opportunities and generate solutions for customers
- Drive products from design, to prototyping up to environmental qualification following internal or customer-driven NPI
Key skills/experience required:
- Bachelor’s degree level in Mechanical engineering.
- Provable mechanical design experience using Solidworks and PDM.
- Comprehensive knowledge of 3D CAD, component design, assembly creation and production of drawings in accordance with BS.8888.
- Experience of design of precision machines and mechanisms.
- Experience of packaging electronics into systems enclosures.
- Understanding of common engineering materials and finishing techniques.
- Create and maintain technical documentation that supports the product development process including product specifications, data packs, manuals and end user instructions.
- Knowledge of finite element techniques to predict and simulate performance of proposed designs.
- Knowledge or experience of the full design lifecycle, including taking designs from initial negotiations through requirements capture, sub-system design, hardware design and test to final integration.
To apply for this excellent Mechanical Design Engineer - Pneumatic/Hydraulic opportunity, based in North Wales, please email a copy of your CV to Sophie Khuttan – SKhuttan@redlinegroup.Com quoting reference SKK1175, or for more information, please call Sophie on 01582 878817 / 07961158586.....Read more...
