Over time, you will develop skills in, and be responsible for, the following tasks:
Reading and interpreting engineering blueprints
Planned and reactive maintenance of process equipment
Assisting with Pipework Fabrication and Fitting
Preparing vessels and equipment for Non-Destructive Testing and Inspection
Providing troubleshooting support for mechanical matters, including breakdowns
Assisting with the control and coordination of spare parts associated with Pipefitting Welding
Working safely and within the requirements of all Risk Assessment Method Statements
Complying with safe work systems and maintenance procedures
Maintaining a high level of housekeeping throughout any work area
Reporting unsafe situations or occurrences
Ensuring facilities are maintained in compliance with company processes and Environmental Health & Safety design and maintenance standards
Ingressing equipment into the clients premises as perthe layout drawings
Assisting in the reconnection and reassembly of large process skids and equipment. These can be anything from full brewhouses to to water filtration skids and anything in between
Helping to level and line the equipment
Mechanically rebuilding process skids and equipment
Re-assembling all aspects of the mechanical pipework, tanks, and fabrications
Equipment troubleshooting and snagging
Training:Food and Drink Maintenance Engineer Level 3 Apprenticeship Standard:
The successful candidate will be coming to college for 17 weeks initial block release in the first academic year, reducing down to 10 the following year
You will attend the Process Manufacturing Centre in Huddersfield
Training Outcome:
After successful completion of the apprenticeship, there may be an opportunity for full-time employment
Employer Description:We design, install and commission process equipment, including full turnkey brewhouses, to meet the needs of all beverage and pharmaceutical manufacturers. Our customers range from craft independent brewers to global blue-chip drinks manufacturers.Working Hours :Monday to Friday, 08:00 - 17:00. Overtime, including evenings and weekends, is available. Flexibility in working hours is required. Working hours are project and customer-dependent.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,A Full UK driving licence,Ability to travel....Read more...
Over time, you will develop skills in, and be responsible for, the following tasks:
Reading electrical schematics and diagnosing faults in control systems.
Working with stainless steel conduit, basket and tray for containment of cables.
Running and terminating different cable types, including Cat5e, SWA, SY and YY.
Working on 400V AC mains, 24V DC control and 4-20mA analogue circuits.
Working with 3-phase motors and variable speed drives.
Panel wiring.
Working in an industrial environment in a safety-conscious manner.
Completing paperwork including producing accurate reports on a timely basis.
Completing projects as part of a larger team, including helping with mechanical installations from time to time.
Assisting with the control and coordination of spare parts associated with Electrical Installations.
Working safely and within the requirements of all Risk Assessment Method Statements.
Complying with safe work systems and maintenance procedures.
Maintaining a high level of housekeeping throughout any work area.
Reporting unsafe situations or occurrences.
Ensuring facilities are maintained in compliance with company processes and Environmental Health & Safety design and maintenance standards.
Assisting in the reconnection and reassembly of large process skids and equipment. These can be anything from full brewhouses to water filtration skids and anything in between.
Electrically rebuilding process skids and equipment.
Equipment troubleshooting.
Training:The successful candidate will be coming to college for 17 weeks initial block release in the first academic year, reducing down to 10 the following year. You will attend the Process Manufacturing Centre in Huddersfield.Training Outcome:After successful completion of the apprenticeship, there may be an opportunity for full-time employment. Employer Description:We design, install and commission process equipment, including full turnkey brewhouses, to meet the needs of all beverage and pharmaceutical manufacturers. Our customers range from craft independent brewers to global blue-chip drinks manufacturers.Working Hours :Minimum of 40 hours per week, Monday to Friday, 08:00 - 17:00. Overtime, including evenings and weekends, is available. Flexibility in working hours is required. Working hours are project and customer-dependent.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,A Full UK driving licence,Ability to travel....Read more...
SIGNAGE GRAPHIC DESIGNER AND ARTWORKER – ARCHITECTURAL SIGNS – BRACKLEY– FULL TIME – UP TO £28,000 BASIC SALARY & BENEFITSAre you looking for a challenging opportunity to develop your full potential? Then this could be the role for you!Our client is a well-established world leader in architectural signs supplying blue chip companies in the UK and overseas.Due to their continued success and growth, they are now recruiting for a highly motivated and experienced Signage Graphic Designer and Artworker in their Brackley office.THE ROLE• As a Signage Graphic Designer, you will be designing signage graphics and art work for a leading signs manufacturer• Creating visualisations of the signs and graphics• Creation of designs and artwork, from initial concept to final print ready files• Prepare rough drafts and present ideas to clients• Liaise with the client to create final drafts• Prepare the design and liaise with the production and manufacturing teams• Using design software e.g., Adobe Illustrator, InDesign and other similar software• Carrying out adhoc duties as requested by senior staff• You will be working from our client Brackley, Northamptonshire office• This is a full time permanent positionTHE PERSON• The successful Signage Graphic Designer MUST be enthusiastic, reliable and a self-motivated individual with the drive to success in a challenging environment• A strong portfolio of example designs across signage or other large format graphics industries • Previous experience within signage industry or reprographics highly advantageous• Experience or prior knowledge of Adobe Creative Suite (InDesign, Illustrator) or CAD• A keen eye for details• You must be IT literate and able to use or pick up new software easily• Have a technical mind with a creative flair• Naturally you must be well presented, well spoken with a confident manner as you will be dealing with clients directly• A good communicator with excellent organisational skills and time management skills• Team Player with an efficient and proactive approach• Able to provide referencesTHE PACKAGE• £27,000 - £28,000 Basic Salary (Subject to experience)• 25 Days Holiday + Statutory days• Pension Scheme• Market leading companyImmediate interviews availableSIGNAGE GRAPHIC DESIGNER AND ARTWORKER – ARCHITECTURAL SIGNS – BRACKLEY– FULL TIME – UP TO £28,000 BASIC SALARY & BENEFITS....Read more...
AV Field Service Engineer (London or Home Counties) – Are you a top of the pile Audio Visual field engineer now looking for a new working environment? I am looking for a London or Home Counties based candidate who can work to the highest standard of customer satisfaction. The main aspect of this position is to fix faults (service) and to keep clients systems working to the desired specification within the blue chip / corporate / hospitality market place. You will have an excellent head on your shoulders for fault diagnostics and be able to find problems that occur on integrated AV systems. This could be a simple connector or issue or something much darker. Hands on skills need to be second to none and you need to work in a quick / efficient manner whilst keeping the end user client happy and informed. All paperwork needs to be completed signed off and handed in on time. This position will involve European TRAVEL. If you have basic programming experience of Crestron, DSPs or knowledge of AV switching and Videowalls that would be nice to see on your CV. Previous experience with audio and video along with control systems is an absolute must. The role will offer training and development in industry related courses company for the candidate that shows the aptitude and willingness to develop. So if you have the need to work for a small friendly AV integrator then please send me your full detailed CV today.NO SPONSORSHIP IS ON OFFER YOU MUST BE IN THE UK / COMING TO THE UK TO BE CONSIDERED OR HAVE THE APPROPRIATE WORKING VISACRESTRON EXTRON QSYS DSP AUDINATE DANTE SERVICE CONTROL VIDEOCONFERENCE NETWORKING RACK CISCO CTS VC AUDIOVISUAL AV SOUND LIGHTING AUDIO VIDEO VISUAL A/V AUDIO/VISUAL VIDEOWALLS LED PROJECTOR AUTOMATION LONDON ESSEX KENT SURREY HERTS BEDS BUCKS BUCKINGHAMSHIRE BERKSHIRE BEDFORDSHIRE....Read more...
Design ManagerBuckinghamshire£65,000 - £85,000 + Travel Allowance + Discretionary Bonus + Pension + Holidays + Private Medical Insurance + Career Progression + ‘Immediate Start’
Join a high-performing, fast-growing contractor delivering complex, high-value (£100m+) mission-critical projects across the UK and Europe. This is a rare opportunity for a driven Design Manager to take ownership of technically challenging builds in the data centre, pharmaceutical, and advanced logistics sectors — while stepping into a clear and supported path towards Senior Management and ultimately Director level. You'll be part of a dynamic, forward-thinking team trusted by blue-chip clients and known for quality, innovation, and rapid career development.
In this role, you’ll take full ownership of the design process, from coordination through to technical assurance and site integration. Working alongside the project team, consultants, and subcontractors, you’ll manage the flow of design information and ensure alignment with programme, budget, and quality expectations.
You’ll play a key role in bridging the gap between concept and construction – making sure every design detail is ready, compliant, and buildable. The role will suit candidates with a background in MEP or Build (CSA) who are confident in navigating the technical design process, BIM coordination, and working in a fast-paced delivery environment. This is an office-based role in Leeds, supporting a long-term scheme for a major confidential retail client. Applicants must be commutable to the Buckinghamshire office and have relevant UK project experience.
Your Role as Design Manager Will Include:
Managing and coordinating the full design process, aligning with client and construction requirements
Leading design meetings with clients, consultants, and subcontractors
Reviewing and managing design deliverables including drawings, technical submittals, and packages
Ensuring quality control through site inspections and design reviews
Overseeing completion of as-built packages and final design documentation
As a Design Manager, You Will Have:
A background in MEP, Architectural, Structural, or Civil Engineering
Experience managing technical design on major construction projects
Proficiency in BIM and CAD tools, with a good grasp of digital workflows
Keywords: design manager, MEP, build, technical coordination, BIM, construction design, project delivery, design meetings, stakeholder management, CAD, technical assurance, building regulations, office-based, construction, commercial build, architecture, civil, structural, engineering, Amersham, Bourne End, Burnham, Chorleywood, Denham, Ealing, Eastcote, Farnham Common, Farnham Royal, Greenford, Harrow, Hayes, Hemel Hempstead, High Wycombe, Hillingdon, Iver, Iver Heath, Langley, Little Chalfont, Maidenhead, Marlow, Northwood, Pinner, Rickmansworth, Richings Park, Ruislip, Slough, Southall, Stoke Poges, Taplow, Uxbridge, Watford, West Drayton, Windsor, Wooburn Green....Read more...
We’re looking for a Technical Sales Administrator to join our small, friendly and supportive BFM Fittings team - this is pivotal role in which you’ll have a big impact. Your input to help our customers solve challenging technical problems will be invaluable. You will provide exceptional customer service by ensuring all admin tasks are completed efficiently and recommending the right equipment from our market-leading product range.ProSpare is a family-owned company. We help manufacturing and processing companies to improve efficiency, safety, product quality and sustainability through innovative engineering components and solutions. Our clients range from blue-chip multinationals to independent operations in a wide variety of industries across the UK. We take pride in offering world-class products and outstanding technical support and industry knowledge.If you’re passionate about solving real-world problems and would enjoy being part of a highly successful team, in a company that values expertise and integrity, we’d love to hear from you.Main responsibilities
Administration duties including handling phone calls, sending quotations, writing detailed emails, hosting virtual meetings with customers and maintaining data on our CRM system.Support the Process Improvement Engineer by drafting up comprehensive and professionally presented customer reports and detailed quotations following each site visit.Deal with customers’ technical queries, providing an exceptional level of customer service.
Key skills/qualities/qualifications
At least two years’ experience in sales, business development or admin.Very high level of literacy and numeracy, able to create a wide variety of high-quality documentation - Outlook, Word and PowerPoint.Highly organised, methodical and accurate with meticulous attention to detail.Strong communicator with a professional and confident telephone manner. Comfortable working with people at all levels.Can effectively analyse a variety of basic data, including numerical data, and carry out thorough research, presenting findings in suitable formats, eg simple tables, charts and graphs.Able to work on own initiative and manage own time productively.Self-motivated and proactive, with a strong work ethic.Committed to excellence in customer service.Ideally with a background in engineering and the ability to read and understand technical information, including drawings – this is desirable but not essential
9 am to 5 pm, Monday to Friday24 days’ holiday plus public holidaysFree parkingDiscretionary bonus schemeFriendly, supportive culture; excellent office environment....Read more...
Fabric Engineer – Leading FM Service Provider – Moorgate – Up to £35,000 Location: Moorgate, LondonSalary: Up to £35,000 + Overtime + BenefitsHours: Monday to Friday, 08:00–17:00 Are you a skilled Fabric Maintenance Engineer looking to work on a prestigious commercial site in the heart of London? This is an exciting opportunity to join a leading Facilities Management (FM) Service Provider based at a high-profile, blue-chip office complex in Moorgate. We’re looking for a hands-on, proactive individual with a broad skill set and a solid background in commercial building maintenance. If you're passionate about delivering a top-tier service and enjoy a varied workload, this role is for you. Key Responsibilities:Carry out planned and reactive fabric maintenance tasks across a large static site.Perform basic plumbing, carpentry, and decorating duties.Minor repairs including furniture assembly, lock changes, hinge tightening, blind installation/repair.Support office moves and internal churns (e.g., moving desks, assembling furniture).Provide technical assistance and support to other on-site engineers when needed.Ensure all maintenance is delivered to high-quality standards in line with Health & Safety regulations.Liaise with the helpdesk and management team to update on job progress and any issues.Ensure safe working practices are followed by all staff and contractors on site. Requirements:Proven experience in commercial property/building maintenance.Strong knowledge of general fabric duties: basic plumbing, carpentry, painting/decorating, etc.Excellent communication and customer service skills.Health & Safety awareness.PC literate (basic use of Word, Excel, smartphone apps).Ability to work independently and manage time efficiently. What’s in it for you?Competitive salary of up to £35,00025 days holiday + bank holidaysOvertime opportunitiesInternal & external training providedCareer progression with a leading FM providerCompany pension scheme This is a fantastic opportunity to join a stable and reputable company offering long-term progression and support. Interested?Apply today to be considered and take the next step in your FM career.....Read more...
Mechanical Project Manager
Wiltshire
£50,000 - £55,000 + Car Allowance + Progression + Technical Training + Pension + Healthcare + Holidays + 40 Hour Week + Immediate Start
Are you a Project Manager with a background in data centres, telecoms, or complex technical environments? Ready to take on high-profile projects and grow your career in a booming industry? If so, this could be your next move. You’ll be working for a fast-growing, established business trusted by blue-chip clients. Backed by repeat work and a rock-solid project pipeline, the business is targeting £50m turnover — and wants to take the right people up with it. If you’ve delivered mechanical packages and want to grow in a technical environment, this role is built for you.
Join a fast-growing company delivering complex M&E-led fit-outs across data centres and telecoms sectors UK-wide. This is a key opportunity for a Mechanical Project Manager ready to lead technical projects while developing broader M&E experience with structured progression to senior leadership. Whether you’ve delivered full mechanical packages or bring depth in a specific area (like HVAC or air conditioning), the business will invest in developing your wider technical skillset through hands-on project exposure, mentoring, and ongoing support.
Your Role as Mechanical Project Manager Will Include:
* Running the full mechanical delivery of technical projects across data centres, telecoms hubs, or commercial fit-outs* Liaise with the clients and subcontractors.* Managing subcontractors, H&S, budget, programme, and quality — with full support from the senior team* Regular site visits across the South and wider UK (base along M4 corridor ideal)As a Mechanical Project Manager, You Will Have:
* Experience managing mechanical delivery of M&E or fit-out projects* Familiarity with mission-critical or technical environments (e.g. data centres, server rooms, HVAC-heavy, telecoms projects)* Commutable to office in Wiltshire* A proactive, commercial mindset with strong problem-solving skillsKeywords : Mechanical Project Manager,M&E Project Manager,HVAC Project Manager,Mechanical Contracts Manager,Data Centre Project Manager,Building Services Project Manager,Mechanical Site Manager,Fit-Out Project Manager,Technical Project Manager,Mission Critical Project Manager,Mechanical installation,Data centre fit-out,Telecoms infrastructure,M&E coordination,Mechanical delivery,HVAC systems,Mechanical systems integration,Project delivery,Technical environments,Budget and programme management,Health and Safety (SMSTS / First Aid),Commissioning,Risk management,Site supervision,Data Centres,Telecoms,M&E Contracting,Mission Critical Facilities,Technical Fit-Out,Building Services,Mechanical Engineering,Electrical Engineering,Wiltshire,M4 Corridor,Bristol,Reading,Swindon,Melksham,Southern England,UK-wide projects,South West,South East....Read more...
AV Field Service Engineer (London or Home Counties) – Are you a top of the pile Audio Visual field engineer now looking for a new working environment? I am looking for a London or Home Counties candidate who can work to the highest standard of customer satisfaction. The main aspect of this position is to fix faults (service) and to complete preventative maintenance checks to clients within the blue chip / corporate market place. You will have an excellent head on your shoulders for fault diagnostics and be able to find problems that occur on integrated AV systems. This could be a simple connector or issue or something much darker. Hands on skills need to be second to none and you need to work in a quick / efficient manner whilst keeping the end user client happy and informed. All paperwork needs to be completed signed off and handed in on time. If you have basic programming experience of Crestron or knowledge of AV switching and Videowalls that would be nice to see on your CV. Previous experience with audio and video along with control systems is an absolute must. The role will offer training and development in industry related courses company for the candidate that shows the aptitude and willingness to develop. So if you have the need to work for a more professional in the South East region then please send me your full detailed CV today.NO SPONSORSHIP IS ON OFFER YOU MUST BE IN THE UK / COMING TO THE UK TO BE CONSIDERED OR HAVE THE APPROPRIATE WORKING VISACRESTRON EXTRON QSYS DSP AUDINATE DANTE SERTVICE MAINTENANCE PREVENTATIVE CONTROL VIDEOCONFERENCE NETWORKING RACK CISCO CTS VC AUDIOVISUAL AV SOUND LIGHTING AUDIO VIDEO VISUAL A/V AUDIO/VISUAL IPTV VIDEOWALLS LED PROJECTOR AUTOMATION LONDON ESSEX KENT SURREY SUSSEX HERTS BEDS BUCKS BUCKINGHAMSHIRE BERKSHIRE BEDFORDSHIRE....Read more...
Mechanical Engineer – Programme Manager - Medical Devices – Cambridge
Due to a growth in company output, there is a need for a new Programme Manager who has a Mechanical Engineering pedigree. Based in Cambridge, you will be leading several projects. Some projects will involve you offering support and mentorship to junior members of staff, while other projects will involve you taking on the mechanical design aspects yourself.
We are looking for someone who has been working hands on developing new Medical Devices technologies in their current role, while mentoring other members of staff. Most projects will be on electro-mechanical Medical Devices, so you will need to have worked on these types of technologies. They could be implantable medical devices, wearable tech or another medical technology that abide by EN60601 standards.
Apart from past work experience, it is expected that you would hold a relevant degree within a suitable subject that led you into a Medical Devices Mechanical Engineering role. It would also be advantageous if you hold a master’s or PhD, but not essential as the active work experience in industry is more important.
The types of technologies you will be developing are lifesaving and life improving medical devices, truly industry disrupting technologies that will save and improve thousands of people’s lives.
This role will involve working with external and internal entities, involving a lot of communications both virtual and in real life, due to this it would be advantageous if you have worked in a role that involved communicating updates and project changes continuously.
I mentioned knowing about EN60601, but it would also be essential to have a strong understanding of ISO 13485.
People who have been successful in this role previously tend to have a highly technical hobby, this could be building drones, tinkering with engines, computer programming or another hobby that involves problem solving. If you do have such a hobby, make sure you highlight it on your CV to give you the best chance of gaining an interview.
Apart from working on industry changing technologies, you will be offered a proven career development plan, continuously training to keep you at the forefront of the medical devices sector, excellent salary, bonus, enhanced pension, medical insurance, free meals and other excellent benefits you’d expect from a multinational blue-chip organisation.
I expect a lot of interest in this role, so apply now or ensure consideration.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.....Read more...
Mechanical Engineer – Programme Manager - Medical Devices – Cambridge
Due to a growth in company output, there is a need for a new Programme Manager who has a Mechanical Engineering pedigree. Based in Cambridge, you will be leading several projects. Some projects will involve you offering support and mentorship to junior members of staff, while other projects will involve you taking on the mechanical design aspects yourself.
We are looking for someone who has been working hands on developing new Medical Devices technologies in their current role, while mentoring other members of staff. Most projects will be on electro-mechanical Medical Devices, so you will need to have worked on these types of technologies. They could be implantable medical devices, wearable tech or another medical technology that abide by EN60601 standards.
Apart from past work experience, it is expected that you would hold a relevant degree within a suitable subject that led you into a Medical Devices Mechanical Engineering role. It would also be advantageous if you hold a master’s or PhD, but not essential as the active work experience in industry is more important.
The types of technologies you will be developing are lifesaving and life improving medical devices, truly industry disrupting technologies that will save and improve thousands of people’s lives.
This role will involve working with external and internal entities, involving a lot of communications both virtual and in real life, due to this it would be advantageous if you have worked in a role that involved communicating updates and project changes continuously.
I mentioned knowing about EN60601, but it would also be essential to have a strong understanding of ISO 13485.
People who have been successful in this role previously tend to have a highly technical hobby, this could be building drones, tinkering with engines, computer programming or another hobby that involves problem solving. If you do have such a hobby, make sure you highlight it on your CV to give you the best chance of gaining an interview.
Apart from working on industry changing technologies, you will be offered a proven career development plan, continuously training to keep you at the forefront of the medical devices sector, excellent salary, bonus, enhanced pension, medical insurance, free meals and other excellent benefits you’d expect from a multinational blue-chip organisation.
I expect a lot of interest in this role, so apply now or ensure consideration.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.....Read more...
Complete and maintain helpdesk tickets
Install monitoring software onto customers servers/desktops to ensure service can be carried out effectively
Call and email customers regarding delinquent monitoring software and fix/re-install
Troubleshooting basic network issues
Ensuring that tasks are prioritised and organised efficiently
Liaising with customers IT companies, and working together to solve issues
Maximise uptime for customers print and scan functionalities
Working alongside the Service department on photocopiers set ups
The duties and responsibilities listed above describe the post as it is at present. The post holder is expected to accept any reasonable alterations that may from time to time become necessary.
Skills Required
Good communication
Eager to learn
Passion for technology
Smart attire
Good telephone manner
Team player
Training:Information Communications Technician Level 3 (A level) Apprenticeship Standard:
The instructor leads a live online training session so you can learn at your own pace and in the comfort of your own home or office
A full training schedule is provided upon a confirmed start date, however training is typical 1 day per week
You will be working towards Information Communications Technician Level 3 qualification
Training Covered:
CompTIA A+
AZ-900
Training Outcome:This apprenticeship can lead to a full-time position and scope for further training and qualifications if applicable.Employer Description:Integrating Solutions Limited (ISL) are one of the UKs leading independent suppliers of multi-functional photocopiers and Managed Print Services.
Integrating Solutions Limited (ISL) are one of the UKs leading independent suppliers of multi-functional photocopiers and Managed Print Services.
As an established and financially sound organisation ISL, have developed into a market leader within our field featuring an enviable Blue Chip and high profile client portfolio. Headquartered in London’s rapidly expanding Thames Gateway, we offer a national support infrastructure throughout our network of service centres across the UK.
London Academy became an all-through school because of the rising demand for primary school places in the Borough of Barnet. We have created a fantastic learning environment that ensures our children get the very best possible education from the age of 4 all the way through to 18 years old.Working Hours :Monday - Friday, shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
The successful candidate will be responsible for supporting customers and colleagues with project support queries relating to internal IT issues or product support / delivery for our customers. This is a junior role and has great potential in a vibrant environment to move up. You will continue to add to a dynamic knowledge base of technical solutions, to ensure that the customer's and organisation's IT infrastructure are as efficient and productive as possible.HOURS OF WORK
Your shifts are allocated across the team evenly and will be shared upfront on a 4 week basis and cover weekends and bank holidays. On average 37.5 hours per week, the hours of 8am to 8pm Monday to Saturday and 10am to 5pm on Sundays across the team. Also, with 45 minutes for lunch.Weekend working is included in the shifts but EIT are happy for Helpdesk Analysts to swap shifts with each other, to accommodate special occasions or to be flexible around working hours.Christmas Day, Boxing Day and New Year's Day are Bank Holidays and are classed as days off for all staff.
Typical Shifts are: (Subject to change)
Early Shift: 08:00 to 16:15 with a 45min lunch break.Late Shift: 11:45 to 20:00 with a 45min lunch break.Sunday Shift: 09:45 to 18:15 with a 45min lunch break.
KEY RESPONSIBLITIESYou will:
Assist and direct staff and / or customers where support tickets are raised.Support projects team with customer IT projects, including preparing IT equipment, EPOS and other scripted functions, to prepare equipment for live customer projects for our blue-chip client base.Identify and implement, where requested by management, any necessary technological advances for enhancing business products and services.Maintain and update existing products and services and provide documentation to support and educate employees and customers in said use where applicable.Support and maintain software and hardware used in the organisation's day-to-day operations and services.Provide an excellent level of service to our customers, being professional and courteous at all times.
In addition to the above there may be other duties to carry out in relation to business/customer operational needs as and when required by your line manager to include supporting the warehouse and projects team at busy times and when the helpdesk is not busy. The role will require you to provide excellent levels of service to both internal staff and external customers.KEY REQUIREMENTS
High school education or higher education preferred or, and some helpdesk / project support experience.Demonstrates a desire and aptitude to learn new skills and work on automated systems.Self-motivated, confident and hard-working individual.Strong organisational ability and time management skills.Must be able to work and communicate effectively with both IT Professionals and customers alike and have the ability to adapt communication based on the audience's technical or non-technical ability.Possesses an ability and desire to work in a dynamic, fluid, fast-paced environment.Ability to work on multiple projects simultaneously, yet bring closure to all in a timely manner, as and when required.Good verbal & written communications and interpersonal skills.Must possess excellent problem-solving skills-the ability to logically and systematically identify and resolve issues.Ability to read and interpret technical documentation and procedures.Broad knowledge of common software packages including all Microsoft Office products including good knowledge of Windows / MAC.
SALARY AND BENEFITSThe successful candidate will be rewarded with the following:
Salary based on £19,500 - £24,000 per annum.Discretionary bonus potential at year end.28 days' annual leave (inc bank holidays) - Xmas Day, Boxing Day and NYD closed so holidays.Group Stakeholder pension following a successful trial period.
All applicants must be eligible to live and work in the UK, and due to the nature of our business have a clean driving licence and credit/criminal history. Blue Scorpion Limited and European Information Technology Limited are an equal opportunities employer.....Read more...
Are you a Commercial Solicitor ready to take the next step, but have hit a glass ceiling in your current firm? Are you looking to take your career to the next level? Looking for that next challenge? If so, this role in Leeds City Centre could be the one for you!
Our client is one of the top law firms in Leeds and has a national reputation for excellence, and as a result, boasts an impressive client base and an extremely high-quality workload. The department's expertise spans a broad spectrum of commercial law, including outsourcing; framework and supply arrangements; joint ventures, R&D and collaboration agreements; logistics, warehousing, distribution and supply chain management; IT and technology contracts and information technology advice; agency and distributorship agreements; and franchising.
As a member of this successful team, you will be undertaking work that covers the full range of commercial contracting, from a variety of clients including both blue chip companies and household names. Furthermore, the team hardworking and ambitious, and has a working environment designed to allow people to flourish. An individual with a desire to further their own skills, as well as the enthusiasm to help the more junior lawyers develop theirs, would be a good match for this role.
The firm has been expanding recently, and as a result, business development will also be a large part of the role. You will have the chance to network with clients and grow the department's presence in the market, making this an excellent opportunity for an individual with an outgoing personality and a passion for client contact. In this role you can become the leading figure in the further success of the department and really make a name for yourself in the area.
This particular role is a genuine opportunity to build your career as a commercial and IT solicitor, and for someone more senior, you could use this role as a strong platform to build on the existing work flow and gain partnership. This is a rare opportunity to step into a team geared up to support someone seeking to develop and grow an already successful IT practice.
Our client envisages the successful candidate to have between 4-6 years PQE in Commercial work, however more important than an exact PQE level is a candidate who is technically strong and commercially aware, with a passion for this area of law. The firm is therefore happy to consider individuals who fall outside of this bracket, yet can demonstrate the necessary abilities and enthusiasm for the role.
So if you are looking to take the next step in your career and meet a new challenge head on, why not apply?
How to Apply:
If you are interested in this Commercial Solicitor role, or would like to find out more, please contact Sophie Linley at Sacco Mann on 0113 236 6711. Alternatively, if you know of anyone who would be suitable for this role then please let them or us know as we offer a reward for successful referrals. For full terms please see our website.
Please note our advertisements use PQE and salary levels purely as a guide, we are happy to consider applications from all candidates who are able to demonstrate the skills necessary to fulfil this role.....Read more...
The apprentice will learn to work to strict safety and quality requirements, help to achieve daily production requirements in terms of quality and quantity, optimising efficiency and maintaining operational excellence.
To gain a full working knowledge in all aspects of machining and be proficient in machining of forgings and tooling to specified drawings across both manual and CNC machining centres. The parts machined feed both the commercial and aerospace markets.
The key objectives of the role will be covered in the training, both on site and at the Sheffield College Training Centre.
Key Objectives:
Work in a safe and responsible manner. (For own and other people’s safety)
Comply with statutory, quality and organisational and health and safety regulations whilst carrying out machining practices
Conduct any pre-shift H&S checks as specified; for example: Crane, FLT, daily machine checks
Use and interpret a range of engineering data sources and supporting documentation
Machine components to drawing specifications, using a variety of manual and CNC machinery, primarily with Fanuc control
Minimise machinery downtime by conducting operator preventative maintenance
Use of basic hand tools
Use measuring equipment (Micrometres, Vernier, Wall Thickness Meter, Surface Roughness gauge)
Successfully complete FLT and overhead crane training and safely handle and manoeuvre heavy equipment and product
Meet challenging production targets
Flexibility to undertake varied tasks to deliver the production plan
Identify, where possible improvements in safety and quality
Promote and engage in production improvement activities
Exceptional time keeping and attendance
Ad hoc duties as required
Training:Machining Technician Apprenticeship Standard Level 3 delivered at Olive Grove Campus.Training Outcome:At the end of the period, the apprentice will have gained a broad knowledge and understanding of the machining of forgings in various materials for the Aerospace industry and a full-time role may be available. Employer Description:Forged Solutions Group provides high integrity forgings for the world’s most demanding applications.
From aerospace and energy production, to underground mining, off-highway vehicles and space launch programs we have forged solutions for advanced manufacturing industries for more than 100 years.
Across established sites in the UK and USA, Forged Solutions Group manufactures shafts, rings, discs, asymmetric forgings and extruded cylinders in a range of titanium, nickel, aluminium, copper and steel alloys. We have a global blue-chip customer base for whom we are a trusted, high-quality turnkey supplier known for our unique forging capability and ingenuity.
Our highly skilled teams provides comprehensive design-for-manufacturing assistance. Combined with our advanced forging capabilities, co-located with heat treatment, machining and a world-class materials testing and certification lab, Forged Solutions Group provides an integrated solution; from billet to finished, tested forging.Working Hours :5 x 8 hrs day shifts - 8am - 4pm, Monday - FridaySkills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness,Flexible,Enthusiasm....Read more...
The apprentice will learn to work to strict safety and quality requirements, help to achieve daily production requirements in terms of quality and quantity, optimising efficiency and maintaining operational excellence.
To gain a full working knowledge in all aspects of maintenance, including learning to diagnose faults leading to repair as well as maintaining facilities process equipment. To assist and support with planned and reactive maintenance, as well as consult with internal stakeholders and subcontractors.
Key Objectives
Work in a safe and responsible manner. (For own and other people’s safety).
Comply with statutory, quality and organisational and health and safety regulations whilst carrying out manufacturing techniques.
Ensure that plant and equipment perform to the required standard to facilitate production targets regarding Safety, Quality, Delivery and Cost within a high value manufacturing environment.
Work on a broad range of activities including installation, testing, fault finding and the on-going planned maintenance of complex equipment.
Use and interpret a range of engineering data sources and supporting documentation.
Use lean techniques to improve efficiency and effectiveness.
Where appropriate, support installation, testing and commissioning of a wide range of equipment.
Conduct complex fault diagnosis and repair on high technology engineered systems.
Maintain mechanical/electrical equipment.
Maintain fluid and pneumatic power equipment.
Minimise machinery downtime by conducting preventative planned maintenance.
Confirm testing and subsequent smooth hand over of equipment and plant.
Read mechanical/electrical schematics.
Use of basic hand tools.
Training:Level 3 Maintenance Operations Engineering Technician delivered at the Liberty Steel Training centre at Fox Valley - Stocksbridge. Training Outcome:At the end of the apprenticeship period, the apprentice will have gained a broad knowledge and understanding of the mechanical maintenance of forgings in various materials for the Aerospace industry and a full time permanent role may be available. Employer Description:Forged Solutions Group provides high integrity forgings for the world’s most demanding applications.
From aerospace and energy production, to underground mining, off-highway vehicles and space launch programs we have forged solutions for advanced manufacturing industries for more than 100 years.
Across established sites in the UK and USA, Forged Solutions Group manufactures shafts, rings, discs, asymmetric forgings and extruded cylinders in a range of titanium, nickel, aluminium, copper and steel alloys. We have a global blue-chip customer base for whom we are a trusted, high-quality turnkey supplier known for our unique forging capability and ingenuity.
Our highly skilled teams provides comprehensive design-for-manufacturing assistance. Combined with our advanced forging capabilities, co-located with heat treatment, machining and a world-class materials testing and certification lab, Forged Solutions Group provides an integrated solution; from billet to finished, tested forging.Working Hours :5 x 8hr day shifts - days and times to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness,Positive,Enthusiastic,Self-Motivated,Flexible....Read more...
The apprentice will learn to work to strict safety and quality requirements, help to achieve daily production requirements in terms of quality and quantity, optimising efficiency and maintaining operational excellence.
To gain a full working knowledge in all aspects of maintenance, including learning to diagnose faults leading to repair as well as maintaining facilities process equipment. To assist and support with planned and reactive maintenance, as well as consult with internal stakeholders and subcontractors.
Key Objectives
Work in a safe and responsible manner. (For own and other people’s safety).
Comply with statutory, quality and organisational and health and safety regulations whilst carrying out manufacturing techniques.
Ensure that plant and equipment perform to the required standard to facilitate production targets regarding Safety, Quality, Delivery and Cost within a high value manufacturing environment.
Work on a broad range of activities including installation, testing, fault finding and the on-going planned maintenance of complex equipment.
Use and interpret a range of engineering data sources and supporting documentation.
Use lean techniques to improve efficiency and effectiveness.
Where appropriate, support installation, testing and commissioning of a wide range of equipment.
Conduct complex fault diagnosis and repair on high technology engineered systems.
Maintain mechanical/electrical equipment.
Maintain fluid and pneumatic power equipment.
Minimise machinery downtime by conducting preventative planned maintenance.
Confirm testing and subsequent smooth hand over of equipment and plant.
Read mechanical/electrical schematics.
Use of basic hand tools.
Training:Level 3 Maintenance Operations Engineering Technician delivered at the Liberty Steel Training centre at Fox Valley - Stocksbridge. Training Outcome:At the end of the apprenticeship period, the apprentice will have gained a broad knowledge and understanding of the mechanical maintenance of forgings in various materials for the Aerospace industry and a full time permanent role may be available. Employer Description:Forged Solutions Group provides high integrity forgings for the world’s most demanding applications.
From aerospace and energy production, to underground mining, off-highway vehicles and space launch programs we have forged solutions for advanced manufacturing industries for more than 100 years.
Across established sites in the UK and USA, Forged Solutions Group manufactures shafts, rings, discs, asymmetric forgings and extruded cylinders in a range of titanium, nickel, aluminium, copper and steel alloys. We have a global blue-chip customer base for whom we are a trusted, high-quality turnkey supplier known for our unique forging capability and ingenuity.
Our highly skilled teams provides comprehensive design-for-manufacturing assistance. Combined with our advanced forging capabilities, co-located with heat treatment, machining and a world-class materials testing and certification lab, Forged Solutions Group provides an integrated solution; from billet to finished, tested forging.Working Hours :5 x 8hr day shifts - days and times to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness,Positive,Enthusiastic,Self-Motivated,Flexible....Read more...
Mobile Contract Supervisor - Central London - Commercial portfolio - up to 55k plus travel One of the capital's most established building maintenance contractors is currently looking to recruit a mobile contract supervisor to work across a number of high end blue chip commercial maintenance contracts covering Central London and the City. The role will be based from their Central London head office and time will be spent out and about across the client sites. The role will be working predominantly in a hands off capacity but there will be times when you are expected to assist with engineering duties. The role will be managing a team of four engineers across the portfolio and dealing with things such as management of small works, attending client meetings, appraisals and recruitment. Duties and responsibilities:Reporting to the Regional ManagerSupport the site managers and lead the portfolio in their absenceIdentify and quote for adhoc/extra/minor works across the sitesResponsible for Statutory & Code compliance of all sites, ensuring all sites remain compliant and are operating to the latest Technical and Health and safety guidance.Ensure Planned Preventative Maintenance (PPM) is carried out and ensure all PPM schedules are utilised and the appropriate documents controls are in place and up to date.Ensure compliance with statutory responsibilities and maintain records as required.Provide feedback on team and individual performance and identify development needs, conducting regular 1-2-1 and team meetings and performance reviewsFirst line supervision of Specialist Service Contractors, including Induction and signing off and actioning minor worksUtilising Help Desk and PPM systems to monitor staff’s performance and ensure service delivery and all SLA’s and KPI’s are met.Review the log books - Each week go through a different log book to ensure it is up to date and holds all the relevant information.Carry out hands on PPM and reactive maintenance as and when requiredAttend client meetingsOffer technical support to the client and engineering teamApplicants for the role must be able to meet the following criteria:Electrical, Mechanical or Building Services Engineering. HNC, NVQ Level 3 or Equivalent2-3 years leadership experience combined with good Mechanical and Electrical technical knowledge Proven experience as a Supervisor across multiple Contracts/ProjectsCapable of costing and supervising Reactive Repairs and Small Project worksA proven track record of delivery within the M&E Maintenance sectorKnowledge of SFG20 or Equivalent Maintenance SchedulesExperienced in Statutory & Mandatory Compliance Maintenance Records IOSH Working / Managing Safely, Safe system of Work Procedure – PTW; RAMS etc. Team PlayerComputer LiterateAble to Work on Own Initiative....Read more...
